Browse

Antiques Collectibles Apparel Baby Kids Items Books， Movies And Music Electronics Free Stuff Garden Outdoor Health Beauty Home Goods Home Improvement Supplies Musical Instruments Office Supplies Pet Supplies Sporting Goods Ticket Toys Games Transportation Others

Used Cars New Cars Others

Business Crafts Design And Web Events Home Improvement Legal Lessons Personal Pets Photography Repair And Technical Support Wellness Writing， Translation， And Transcription Others

Activities & Groups Artists & Musicians Classes & Lessons Events Friendship & Networking Lost & Found Rideshare Sports Teams Volunteers Travel & Travel Partners Skills & Language Swap Other

What type of oil does the Kicks use?

1 Answers

DeJoanna

07/25/25 3:14pm

Nissan Kicks recommends using genuine Japanese fully synthetic engine oil with a specification of 0W-20. Owners can choose based on their vehicle's operating environment. An oil change generally requires 4 to 6 liters. If topping up, simply add oil to between the upper and lower marks on the dipstick. Below are some precautions for oil usage: 1. Do not mix old and new oil. Old oil contains a large amount of oxidative substances, and mixing it with new oil will accelerate the oxidation and degradation of the new oil, reducing its effectiveness and lifespan. 2. Do not mix oils of different brands or specifications. Since different brands and grades of oil contain different chemical additives, these additives may react with each other, reducing lubrication effectiveness and producing acidic or alkaline compounds that can accelerate corrosion of engine components. Mixing two types of lubricants may result in separation, cloudiness, and deterioration of cleaning performance.

Was this review help?

3

3

Share

More Forum Discussions

What is the method for adding car coolant?

The method for adding car coolant is: 1. Turn the car key forward to turn off the engine; 2. Let the engine sit until the water temperature drops to normal; 3. Open the front engine hood; 4. Unscrew the small water tank cap to release the pressure in the cooling system; 5. Add coolant to the small water tank up to the MAX limit. Precautions when adding car coolant: 1. Measure the antifreeze freezing point; 2. Prevent leakage when replacing coolant; 3. Prevent hot coolant from spraying and causing injury; 4. Ensure the original coolant is completely drained; 5. Ensure the correct amount is added; 6. Wipe off any residual coolant from vehicle components; 7. After completing the process, check for any leaks.

How to Determine When to Replace the Car's Timing Belt?

Methods to determine when the car's timing belt needs replacement are: 1. The timing belt shows numerous cracks; 2. Slipping or abnormal noise occurs; 3. The car has traveled 60,000 to 80,000 kilometers. The timing belt is a crucial component of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft with a specific transmission ratio. The upper part of the timing belt connects to the timing wheel on the engine cylinder head, while the lower part connects to the crankshaft timing wheel. The timing wheel is linked to the camshaft, with the contact point being the small rocker arm. The rocker arm generates pressure through the power transmitted by the timing belt, performing a lifting function.

How to set up the power window?

The method to set up the power window is: 1. Turn the ignition switch to ON; 2. Press the driver's side window down switch and keep the driver's side window moving downward; 3. Open the driver's side door; 4. Turn off the ignition switch; 5. Press and hold the driver's side window down switch; 6. Turn the ignition switch to the second position (ON); 7. Release the driver's side window down switch; 8. Repeat steps 4 to 7 three times. Situations requiring resetting of the power window: 1. Replacement or repair of the power window regulator; 2. Replacement or repair of the driver's side window; 3. Replacement or repair of the power window motor; 4. Removal of the power window from the power window control unit when the power window timer is on; 5. Replacement or repair of the window guide channel.

What are the methods to identify retreaded tires?

Methods to identify retreaded tires are: 1. Check the tire markings - original tires have raised markings on the outer side while retreaded tires' markings can be scraped off; 2. Observe the tire hairs - original tires have fine hairs that cannot be replicated on retreads; 3. Examine the tread pattern and gloss - original tires have deep tread patterns with soft gloss, while retreads have shallow patterns with excessive shine; 4. Gently scratch the tire with a key - original tires have good elasticity and scratches disappear quickly, while retreads have poor elasticity and leave marks; 5. Inspect the joint between tread and sidewall - original tires have smooth transitions, while retreads show signs of bonding.

How to Check the Year of a Car?

To check the year of a car, you can look up the vehicle's VIN code. The VIN code can be found in the following locations: 1. Left side of the dashboard; 2. Lower left side of the windshield; 3. On the vehicle's nameplate; 4. On the body near the upper part of the right front shock absorber; 5. In the trunk area; 6. On the door hinge pillar, door lock pillar, or one of the door edges where the lock pillar connects. The VIN, or Vehicle Identification Number, is a 17-character code that includes information about the vehicle's manufacturer, year of production, model, body type and code, engine code, and assembly location. The uses of the VIN code include: 1. Verifying the car's identity; 2. Checking for traffic violations; 3. Querying the vehicle's production batch; 4. Accurately locating parts.

How to Check the Production Date of a New Car?

The methods to check the production date of a new car are: 1. Look at the nameplate below the B-pillar on the passenger side; 2. Check the certificate of conformity that comes with the new car, where the production date is located in the upper right corner; 3. Look for a paper nameplate on the front windshield near the driver's seat. The vehicle nameplate is a label that indicates the basic characteristics of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, factory serial number, production date, and manufacturer name. Precautions for new cars: Check the factory nameplate to confirm the vehicle's displacement and production date, and then look for signs of tampering or scratches on the nameplate. If it has been tampered with, extra caution is advised.

Trending Ranking

What is the solution for fault code U0100?

How to Replace the Key Battery for Buick Excelle?

How to reset the service light on Peugeot 308?

How many liters of engine oil does the Envision require?

What does preset mean in a car?

How Often Should Transmission Fluid Be Changed?

Is Changan Suzuki a Joint Venture Car?

What engine does the Changan Kosai use?

How Long Can a Changan Engine Last?

What is the system update method for Changan CS55?

More Forum Discussions

Is the tire pressure of 2.2bar normal for Changan CS55?

What type of engine oil is used in the Changan CS15?

What are the symptoms of a damaged supercharger?

What are the situations where tires need to be replaced?

Help

Cookie

Cookie Settings

© 2025 Servanan International Pte. Ltd.