What type of engine oil should be used for Land Rover Evoque maintenance?

2 Answers
BriannaMarie
07/29/25 4:06pm
The manufacturer recommends using engine oil with a viscosity of 5W-30, preferably meeting the European oil certification standard A5B5. Alternatively, A3B4 oil can also be used as a substitute. This engine is not particularly demanding on oil quality, and both mineral oil and synthetic oil are acceptable. Below is an introduction to the Land Rover Evoque: 1. Powertrain. The Range Rover Evoque is equipped with a turbocharged 2.0TSi4 engine featuring direct injection technology, delivering a maximum power output of 240 horsepower. It is paired with an AWF-21 six-speed automatic transmission. Additionally, the vehicle comes with MagneRide adaptive dynamic suspension and full-time four-wheel drive. The Terrain Response system ensures its top-notch off-road performance, which is a hallmark of Land Rover. 2. Exterior Design. The full front face features intricate lines, primarily arranged in a horizontal and balanced manner while maintaining a clear sense of layering. The abstract grille is embedded in the front face, and the engine skid plate adds a more crossover feel. As an SUV, the Range Rover Evoque stands out with its prominent crossover design. The headlights of the Evoque are also unique, with striking xenon headlights that add a fierce touch to the clean front face.
Was this review help?
16
3
Share
Ashley
08/15/25 4:25am
As a Land Rover owner who has driven the Evoque for several years, I always prioritize fully synthetic 5W-20 oil for maintenance. Why this recommendation? Because the Evoque's Ingenium engine is precision-engineered, and this moderate viscosity ensures quick cold starts and excellent high-temperature lubrication. Initially, I accidentally used 10W-30 conventional oil, which resulted in increased engine noise and a spike in fuel consumption; switching back to 5W-20 immediately restored smooth operation. I recommend changing it every 7,500 kilometers or 6 months, along with the oil filter, and choosing reputable brands like Mobil or Shell to avoid counterfeit products. Proper long-term maintenance can even extend engine life and save on repair costs. Remember to check the owner's manual for customized requirements.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to Calibrate the Senova X35 SAS?

Select the X35 model, click "Start Diagnosis", and load the program. Double-click "Electric Power Steering (EPS)" to enter the diagnostic interface. Select "ECU Configuration" and click "Steering Angle Sensor Calibration". Click "Calibrate" to complete the calibration.
9
3
Share

How to remove the small wrench icon on the 2014 B50 dashboard?

Insert the key, but only insert it without turning. Hold the lever next to the odometer for 5-10 seconds, then turn the key to power on. After another 5-10 seconds, start the car. Keep holding the lever throughout this process without releasing it. Generally, following these steps will clear the small wrench icon. If it doesn't clear, repeat the same process a few more times.
9
0
Share

What Causes High Transmission Temperature?

Reasons for high transmission temperature: 1. Clogged pump suction filter screen; 2. Poor radiator cooling capacity; 3. Severe machine overload operation; 4. Serious wear or damage to the transmission hydraulic pump; 5. Severe system leakage, improper operation of the torque converter inlet regulating proportional valve; 6. Transmission clutch slippage can also lead to excessively high transmission temperature. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts, also known as a gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also equipped with a power take-off mechanism.
16
2
Share

Can the car still be driven if the transmission is slipping?

If the transmission is slipping, the car should not be driven as it poses a safety hazard and requires immediate repair. Causes of transmission slipping: 1. Wear and tear of the clutch, brake, or one-way clutch leading to slipping; 2. Addition or replacement with non-specified oil; 3. Slipping caused by low main oil pressure. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. Manual transmissions primarily consist of gears and shafts, achieving speed and torque variation through different gear combinations; automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic transmission and gear combinations.
11
2
Share

What is the valve clearance for the Ford Focus?

Ford Focus valve clearance is 0.22 to 0.28MM for intake and 0.27 to 0.330MM for exhaust when the engine is cold. Valve clearance is set to ensure the proper operation of the internal combustion engine's valve train. Since the valve train operates at high speeds and elevated temperatures, components like the valve tappet and valve stem expand when heated. Without proper clearance, this expansion could automatically push the valve open, preventing it from sealing tightly against the valve seat, leading to air leakage. The Focus is an A-segment family car and one of Ford Europe's flagship models. It is equipped with either a 1.5L EcoBoost or a 1.5L Ti-VCT engine, and all models meet the China VI emission standards.
16
2
Share

How Should Beginners Drive on the Highway?

Beginners on the highway should maintain a safe distance from the vehicle in front. Here are some tips for beginners driving on the highway: 1. High-speed driving: Avoid sudden steering wheel movements while driving on the highway. Do not reverse, drive against traffic, or make U-turns or turns across the central divider. During normal driving, the following vehicle in the same lane must maintain a sufficient distance from the vehicle in front. 2. Precautions: When entering the highway, accelerate to a speed of at least 50 km/h as quickly as possible. Vehicles entering the highway from the ramp must increase their speed in the acceleration lane. When merging into the main lane, they must not hinder vehicles already traveling in the main lane and should drive in the outer lane.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.