···
Log in / Register

What type of engine oil is suitable for the Jeep New Compass?

3 Answers
Ronnie
08/27/25 5:29am
jeep compass uses 5w20 engine oil. The Jeep Compass is the youngest compact SUV in the Jeep family. The Compass is equipped with 2.0L and 2.4L DVVT aluminum engines and a new 6-speed PowerTech automatic transmission, delivering excellent power and more efficient comprehensive fuel consumption performance. Mineral engine oil: Mineral oil is inexpensive, but its service life and lubrication performance are inferior to synthetic oil, and it also causes greater pollution to the environment. In addition, since impurities cannot be completely removed during the refining process of mineral oil, it has a higher pour point and is not suitable for use in extreme conditions in low-temperature regions. Semi-synthetic engine oil: Semi-synthetic engine oil uses semi-synthetic base oil, which is a product purified from mineral oil through hydrocracking technology. It is a mixture of mineral oil and fully synthetic oil in a ratio of 4:6. The purity of semi-synthetic oil is very close to that of fully synthetic oil, but its cost is slightly higher than that of mineral oil, making it an ideal transitional product from mineral oil to synthetic oil.
Was this review help?
15
2
Share
Melo
09/09/25 4:25am
I've been using the Jeep New Compass for two years and found that oil selection is crucial. Full synthetic types like 5W-20 are the most suitable because of their strong fluidity, especially during cold starts, which provides good engine protection and avoids wear. I make it a habit to check the oil level every 5,000 kilometers; too little oil can cause overheating and damage components. Choose brands with Jeep certification, such as Shell or Mobil, as they not only improve acceleration response but also extend engine life. Don't use cheap oil; saving a little money now might lead to major repairs later. Pay extra attention to oil viscosity during significant weather changes to avoid affecting driving performance due to oil being too thick or too thin. Always keep an eye on the oil pressure light while driving, and if it comes on, change the oil or have it checked immediately.
Was this review help?
10
0
Share
Expand All
WestonRose
10/23/25 5:16am
As a family SUV, the new Compass can use fully synthetic 5W-30 engine oil, which is worry-free and reliable. Good oil quality can prevent minor issues like unstable idling or increased fuel consumption, making trips safer for children. I recommend checking the owner's manual to confirm specifications and avoid switching to other brands randomly, as incorrect usage may lead to leaks or malfunctions. Regular maintenance is crucial—typically changing the oil every 6 months—spending a little to avoid major troubles. Adding an oil additive in summer protects the engine from high temperatures, while checking oil levels before cold starts in winter adds peace of mind. Simple DIY maintenance can save time on trips to the repair shop.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Can a lost license plate be reissued in a different location?

If a vehicle license plate is lost in a different location, it cannot be reissued there. The reissuance must be processed at the vehicle management office of the registration location. According to Article 44 of the "Motor Vehicle Registration Regulations": If a motor vehicle license plate or registration certificate is lost, missing, or damaged, the owner of the motor vehicle must apply for a replacement at the vehicle management office of the registration location. When applying, the owner must fill out an application form and submit proof of identity. Below are the required materials for authorizing someone to reissue the license plate: 1. Original and copy of the motor vehicle owner's identity proof; 2. Original and copy of the motor vehicle registration certificate; 3. Original and copy of the agent's identity proof, and a written authorization from the motor vehicle owner.
20
3
Share

How often should the Elantra's spark plugs be replaced?

The Elantra's spark plugs should be replaced every 100,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has an insulator skirt that is reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burning. If the spark plugs are covered in oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected for the spark plugs, the air-fuel mixture is too rich, or there is oil leakage.
3
2
Share

Does Applying Side Decals Affect Vehicle Inspection?

If the decals cover more than 10% of the vehicle's body area, you only need to file for a record at the relevant authorities, which will not affect the annual inspection. However, if you fail to file for a record, it will affect the annual inspection. Additional Information: 1. You need to file for a record at the local vehicle management office and then update the photo on your vehicle registration certificate. This will ensure that the annual inspection is not affected. If you do not file for a record, it will impact the inspection, and you may also face penalties from traffic police while driving. 2. The annual inspection includes a check of the vehicle's exterior. If the exterior has been modified, it may not pass the inspection. During the inspection, the vehicle must go through a testing line equipped with professional devices and staff. 3. The annual inspection involves checking the vehicle's exterior, exhaust emissions, lighting system, braking system, and chassis. Components such as brake lights, turn signals, and reverse lights are prone to malfunction.
13
5
Share

What is the emission standard for cars in 2006?

2006 cars could meet either China II or China III emission standards. Here are the relevant details: 1. China II: The abbreviation for the National Phase II emission standard, equivalent to Euro II standards, meaning the exhaust pollutant levels match Euro II requirements. 2. Regulation: According to the State Environmental Protection Administration's "Announcement on Implementing National Phase II Motor Vehicle Emission Standards," starting from September 1, 2003, all newly designed heavy-duty vehicles were required to comply with National Phase II type-approval emission limits equivalent to Euro 2 standards.
13
4
Share

What does the hold button in the car mean?

The hold button on the vehicle means hold. After pressing the hold button, the automatic transmission is in hold mode, and the hold mode indicator light on the dashboard lights up. The hold button adjusts the optimal driving state according to different driving conditions, effectively preventing the transmission from shifting frequently, and plays the role of forced downshifting and not upshifting when overtaking. The situations for using the hold button are: 1. When starting on snow, place the gear lever in the 2nd gear position and press the hold button, the transmission will maintain the gear ratio at 2nd gear, making the start smoother; 2. When driving on continuous curves, press the hold button in D4 gear, the transmission will maintain 3rd gear, which can continuously output greater torque, improve acceleration performance, and make driving smoother; 3. When driving on mountain roads or continuous slopes, press the hold button in D4 or 2nd gear to enter hold mode, making acceleration more powerful when going uphill and providing greater resistance and safety when going downhill, avoiding wear caused by frequent shifting of the transmission.
20
3
Share

How Long to Wait Before Rescheduling After Failing Subject 3

Subject 3 exam retakes can be scheduled 10 days after a failed attempt. Below are key details about Subject 3 testing: 1. Test components: Vehicle preparation, lighting simulation test, starting off, straight-line driving, gear shifting operations, lane changing, roadside parking, proceeding straight through intersections, left/right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, oncoming vehicle handling, overtaking, U-turns, and nighttime driving. 2. Retake policy: According to China's driver's license regulations, candidates have five total attempts for Subject 3. Failure to pass after five attempts invalidates all previous test results, requiring complete re-registration starting from Subject 1.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.