What Type of Driver's License is Required for a Motorcycle?

1 Answers
McGrant
07/29/25 9:03am
Motorcycles fall under the D driver's license category. Below are relevant details about the D license: 1. Eligible Vehicle Types: The D license authorizes the operation of ordinary three-wheeled motorcycles; specifically, vehicles with an engine displacement exceeding 50ml or a maximum design speed over 50km/h. 2. Additional Notes: For first-time applicants and those adding the D license to their existing qualifications, a 12-month probationary period applies. If adding a D license, motorcycle riders must adhere to relevant regulations, while driving cars remains unaffected. The probationary rules for C1 and D licenses operate independently without interference.
Was this review help?
1
5
Share
More Forum Discussions

What are the length, width, and height dimensions of the Ford Escort?

The length, width, and height dimensions of the Ford Escort are 4633mm/1825mm/1490mm, which are official data. The length of the Ford Escort refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Ford Escort has a maximum power of 90kW and a maximum torque of 152 N·m. This engine reaches its maximum power at 6500 rpm and its maximum torque at 4500 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed automatic transmission. The national regulations on vehicle dimensions have specific provisions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
10
3
Share

What to Do When the Audi Q5 Battery Dies

You can use the push-start method to start the vehicle. However, it is recommended to promptly contact a rescue vehicle, then connect jumper cables to temporarily charge the battery and start the engine. More relevant information is as follows: 1. Before push-starting, first observe whether the road conditions where the vehicle is parked are suitable for push-starting. You can use a downhill slope to increase the vehicle's speed. If the road ahead is uphill, pushing the car forward will be exhausting, and it will be difficult to increase the speed, so you should turn the car around and push it downhill. Try to avoid push-starting in areas with heavy vehicle or pedestrian traffic to prevent accidents due to improper driver response after the vehicle starts. Before starting the vehicle, turn on the ignition switch. Once a sufficient speed is reached, shift the transmission into gear, then quickly release the clutch pedal and press the accelerator. Once the engine starts, quickly press the clutch pedal while controlling the throttle to prevent the engine from stalling, then slowly stop the vehicle. 2. To avoid being unable to charge the Audi Q5 battery when it dies, the owner should keep a set of jumper cables in the Audi Q5, which can be purchased at most auto parts stores. However, when connecting the jumper cables, it is crucial not to mix up the connection order. First, connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle's battery. Then, connect the negative terminal of the rescue vehicle's battery to a metal part in the engine compartment of the dead car (grounding). After connecting the jumper cables, start the rescue vehicle's engine and slightly increase the engine speed. After about 5 minutes, the dead battery can be emergency-charged. Once charging is complete, remove the jumper cables in the reverse order of connection.
19
1
Share

How to Remove a Written Warning from Traffic Police?

Written warnings from traffic police cannot be removed. Here are the details: 1. Content of the written warning: The warning notice is essentially the "Traffic Management Administrative Penalty Decision" issued by the traffic police department. It records the offender's name, phone number, ID number, license plate number, and the violation. It also states that a warning penalty will be imposed in accordance with Article 88 of the "Traffic Law." 2. Purpose of the written warning: A written warning does not involve fines or demerit points but will be recorded. If the same violation is committed again and another written warning is issued, the two warnings can accumulate to result in fines and demerit points. 3. Penalty regulations: Article 88 of the "Road Traffic Safety Law" stipulates that penalties for road traffic safety violations include warnings, fines, temporary suspension or revocation of a motor vehicle driver's license, and detention.
10
3
Share

How to Calculate Tire Age?

Tire age is generally marked on the outer side of the tire, and the production date can be obtained from the last four digits of this marking. Below are specific details about automotive tire specifications: 1. Specification Model Representation: Tires are crucial components of a vehicle, and they come in various specification models, each suitable for different types of vehicles. The specification model is usually indicated on the sidewall of the tire through a series of alphanumeric characters, representing the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed Rating: Based on the maximum speed they can sustain, tire speed ratings are categorized into different levels from A to Z, with level A further divided into eight sub-levels from A1 to A8. Generally, the later the letter representing the tire's speed rating appears in the alphabet, the better the tire's performance.
1
4
Share

Will the lack of coolant affect the engine in a car?

Yes, the lack of coolant will affect the engine in a car. Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and inhibiting scale and corrosion throughout the year. How to replace coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. Coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, replace the hose or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continuously flush it through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink color. Continue adding clean water until the drained water runs clear. Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add new coolant through the radiator hose. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.
16
5
Share

What engine does the Roewe i6 have?

Roewe i6 is equipped with a Blue Core direct-injection turbocharged engine, with a maximum power of 124KW and a maximum torque of 250NM. The new car comes with two engine options: a three-cylinder 1.0T and a four-cylinder 1.5T, and offers consumers a choice between a 6-speed manual transmission and a 7-speed dual-clutch transmission. The Roewe i6 is a model launched by SAIC Motor, with dimensions of 4671mm in length, 1835mm in width, and 1464mm in height, and a wheelbase of 2715mm. The Roewe i6 largely inherits the design philosophy of the Vision-R concept car, adopting a wide and flat style. The overall design consists of smooth surfaces and sharp lines, giving the car a very sporty characteristic.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.