What transmission does the 2019 Nissan Qashqai use?

1 Answers
VanFelix
07/29/25 11:06pm
The 2019 Nissan Qashqai is equipped with a new-generation XTRONIC CVT intelligent continuously variable transmission, featuring a 7-speed manual mode. CVT transmissions are commonly found in Japanese models, as they can optimally select the appropriate gear ratio based on engine conditions, achieving transmission efficiency between 90% to 97% during operation. The Qashqai's body dimensions are 4315mm in length, 1783mm in width, and 1606mm in height, with a wheelbase of 2630mm. In terms of power, this vehicle uses a 2.0L naturally aspirated four-cylinder engine with the model code MR20. Compared to the previous model, this engine has seen slight improvements in parameters, primarily in meeting the China VI emission standards.
Was this review help?
14
5
Share
More Forum Discussions

Should an Automatic Transmission Car Be Shifted to P Gear First or Turned Off First When Parking?

The correct sequence is to press the brake, shift gears, engage the handbrake, turn off the engine, and then shift to P gear. The reasons are as follows: First, releasing the foot brake and engaging the handbrake can cause wear to the transmission: For example, when driving on a slope, such an operation will cause wear to the transmission. When encountering a slope, you can press the brake, engage the handbrake, then release the brake, and shift the DNP gears in order. Second, the impact of incorrect sequence: Everyone's driving techniques are definitely not exactly the same. Parking does not necessarily have to follow a fixed procedure. Parking decisions should be made based on the surrounding environment of the parking location. If done improperly, it may cause certain damage to some parts of the car, which might not be noticeable in the short term, but small issues can accumulate and lead to significant problems over time. Minor wear might seem insignificant to the car, but continuous small wear is not a small harm to the vehicle.
14
5
Share

Should a New Car Be Equipped with an Engine Guard Plate?

Whether a new car needs an engine guard plate is introduced as follows: 1. Choose based on daily usage: The installation of an engine guard plate can be selected according to the condition of the road surface used daily. Generally, for commuting on well-paved urban asphalt roads, installation is unnecessary, or the original plastic guard plate can be replaced with other materials. If the car is used in rural areas with unpaved roads, mostly dirt roads or bumpy conditions, it is recommended to install or replace with a harder material guard plate. Common materials include iron and aluminum-magnesium alloy. Iron plates are heavier and prone to rust, while alloy plates are less likely to rust, making them a preferable choice. 2. Pros and cons of the guard plate: The engine guard plate can effectively reduce damage to the engine from hard object impacts, as the impact can be absorbed and blocked by the guard plate, which is an advantage. The disadvantage is that noise may increase slightly after installation, but it should remain within an acceptable range, so this issue can be largely ignored. Overall, the benefits of installing a guard plate outweigh the drawbacks.
16
2
Share

What are the tips for driving test subject two?

Here are some tips for subject two of the driving test: 1. Reverse parking: During the test, first reverse to the right, then to the left. Not following this sequence will result in a failed test. Pay attention to maintaining a 30cm distance from the edge. 2. Parallel parking: The main points for deduction are the turn signal, maintaining a 30cm distance from the edge, and avoiding crossing the line. When entering the test area, turn right in advance and align the highest point of the windshield wiper with the roadside line to adjust the 30cm distance. During the reverse, remember the first right turn point, straighten the wheel, turn left completely, park, turn on the left turn signal, and when exiting, check the rearview mirror to prevent the wheels from crossing the line. 3. Right-angle turn: The main points for deduction are the turn signal and avoiding crossing the line. After entering the test area, turn on the turn signal, and turn it off after the voice prompt. Incorrect operation of the turn signal will deduct 10 points. After entering the right-angle turn, adjust the car body to maintain a 30cm distance from the edge line. The reference point is the same as in parallel parking. When turning completely, slightly release the clutch to prevent stopping or stalling. Straighten the car body after the rear wheels exit to prevent the wheels from crossing the line.
11
0
Share

What are the penalties for driving with an expired temporary license plate on a new car?

Penalties include a fine of 200 yuan and 12 demerit points. Driving with an expired temporary license plate will be considered as driving without a vehicle license plate. The traffic management department of the public security authority will impound the vehicle and impose penalties according to relevant procedures. Below is relevant information: 1. Temporary vehicle license plate: A temporary driving permit issued by the vehicle management department of the public security authority before the vehicle is officially registered due to pending procedures. 2. Conditions for applying for a temporary license plate: When driving the vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office in the place of purchase. When transferring vehicle registration and after surrendering the official license plate, a temporary license plate must be applied for at the local vehicle management office to drive back to the local area.
14
0
Share

What is the fuel consumption of the Leiling hybrid?

The average fuel consumption per 100 kilometers is approximately 4.6L. Below is relevant information: 1. Exterior: The Leiling Dual Hybrid model is based on the standard version but features a redesigned front fascia. The lower grille has been slightly reduced in size, while silver chrome trim has been added to the bumper area for enhanced style. Blue-accented headlight brows and blue badging further emphasize its identity as a new energy vehicle. 2. Powertrain: The Leiling hybrid is equipped with a hybrid system combining a 1.8L Atkinson-cycle engine and a permanent magnet synchronous motor. The engine delivers a maximum output of 73kW, while the motor produces 53kW. According to official data, the vehicle's comprehensive fuel consumption is just 4.2L/100km.
1
4
Share

Strong Gasoline Smell When Starting the Car

When starting a cold engine, the vehicle's computer will appropriately increase the fuel injection volume based on intake temperature and coolant temperature signals. At this time, the engine has not yet reached its normal operating temperature, resulting in poor combustion efficiency. This causes some fuel to be discharged without being fully burned, leading to a strong gasoline smell during cold starts. If there is still a heavy gasoline smell after starting, the following faults may have occurred: 1. Insufficient air intake at the throttle valve: This causes incorrect air flow information, affecting fuel injection volume and increasing fuel consumption, which makes the gasoline smell more pronounced. 2. Excessive carbon buildup in the cylinder combustion chamber and pistons: This leads to insufficient cylinder pressure, causing an overly rich air-fuel mixture and increased fuel consumption. 3. Excessive carbon deposits inside the engine: This results in poor atomization of the air-fuel mixture. 4. Gasoline pipe leakage: Oil sludge forms at the pipe joints, and the smell enters the car through the air conditioning system.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.