What to Do If You Lose the Card on the Highway?

How to Enable the Lock Sound on T-Roc?

To set the lock sound for the Volkswagen T-Roc, follow these steps: 1. Press the brake pedal, shift the gear lever to P position, release the brake pedal, and press the one-touch start button twice consecutively; 2. Close all doors, then press and hold the lock button on the driver's door for more than 10 seconds. Below is some relevant information about the T-Roc: 1. Interior-wise, the T-Roc's cabin design follows Volkswagen's signature family style, featuring a dashboard slightly tilted towards the driver. It comes equipped with a multifunction steering wheel, large central touchscreen, automatic air conditioning, panoramic sunroof, etc. 2. Dimensions: The vehicle measures 4318mm in length, 1819mm in width, and 1582mm in height, with a wheelbase of 2680mm. It is paired with a 7-speed dry dual-clutch transmission, achieving a top speed of 200 km/h.

112

Share

What grade of gasoline should be used for the CB400X?

The manufacturer recommends using 97-octane gasoline. The CB400X has a compression ratio of 11.3:1. Engines with a compression ratio exceeding 10:1 should use 98-octane, while those below 10:1 are more suitable for 95-octane. It's not true that higher-octane gasoline is always better. Taking the 2022 Honda CB400X as an example: The vehicle dimensions are 2085×830×1370 (mm), with a seat height of 807mm, minimum ground clearance of 156mm, and a wheelbase of 1416mm. It is equipped with a 400ML twin-cylinder four-stroke engine, with a bore and stroke of 67.0x56.6mm, maximum power of 33.0kw/9000rpm, and maximum torque of 37.0nm/7500rpm. The official fuel consumption is 3.6L/100km. Wheel specifications: Front tire size is 120/70ZR17, rear tire size is 160/60ZR17, with a front dual-disc and rear disc braking system. The gasoline octane rating represents the fuel's octane number. Higher-octane fuel indicates a higher octane number, which means better anti-knock performance. This results in smoother engine operation, reduced wear, and better engine protection. Using lower-octane gasoline in a high-octane vehicle can cause engine knocking. Due to the significantly lower octane number, the gasoline's ignition point decreases, leading to premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine issues, affecting not only driving stability but also causing abnormal wear to pistons and cylinders, and in severe cases, cylinder scoring. Refueling precautions: When refueling: Turn off the engine, avoid using phones or making calls, and do not use open flames in the gas station. Always turn off the engine while refueling. If there is a queue, wait in line orderly without cutting in. When choosing fuel: Always select reputable gas stations with high-quality fuel and avoid those with poor-quality fuel. Long-term use of low-quality gasoline can lead to increased carbon deposits in the engine. It's essential to choose both a good gas station and the correct gasoline octane rating.

101

Share

What is the size of the photo for driver's license renewal?

According to the Road Traffic Safety Law of the People's Republic of China, the photo for a driver's license should be 1-inch in size. Here is additional information: 1. The background color of the driver's license photo should be white: Wearing dark-colored clothes can increase the contrast with the background, such as black, yellow, green, etc. It is best to wear collared clothes or shirts to make the photo look more formal. 2. Driver's license photo: Some regions may use the photo submitted during the application, some places require bringing your own photo after passing the subject four exam, and another option is to take the photo on-site when applying for the license.

105

Share

What is the fastest speed for an F1 car to change tires?

If only the tire change time is calculated (timing starts when the car stops in the grid at the garage entrance, the car is lifted by the jack, the fixing bolts are removed, the old tires are taken off, the new tires are installed, the fixing bolts are secured, the car is lowered by the jack, and the car starts and leaves the grid at the garage entrance to stop the timing), without any mistakes, it generally takes between 2.1 to 2.5 seconds. The F1 tire usage rules are as follows: 1. Designated tire usage rules: The FIA designates 3 sets of tires, including one set of red tires, which teams cannot use before the qualifying session. The top 10 drivers who advance to Q3 must use this set of tires to complete Q3 and return them to the race officials after Q3 ends. The other two sets are tire compounds that the race officials require teams to use, and teams must choose one of these two compounds as the race tire. 2. Practice session usage rules: During the three free practice sessions, one set of tires must be returned within 40 minutes of the start and at the end of FP1, and two sets must be returned after FP2 and FP3. After the three practice sessions, teams are left with only 7 sets of tires for the qualifying and race sessions. 3. Race and qualifying session usage rules: Since the top 10 drivers who advance to Q3 must return the set of red tires used in Q3, by the race stage, the top 10 qualifiers are left with only 6 sets of tires, one less than the bottom 10 drivers. Additionally, the top 10 drivers must use the set of tires that set the fastest lap in Q2 for the race start, meaning they must start on a set of used tires from Q2. During the race, each driver must use two or more different tire compounds.

110

Share

How many liters of engine oil does the Geely Boyue 1.8T use?

Geely Boyue 1.8T uses 5 liters of engine oil. How to use engine oil for Geely Boyue: The Geely Boyue 1.8 requires approximately 5 liters of engine oil, using Shell semi-synthetic oil with a viscosity grade of 5W-40. Taking 0W-20 as an example: the 0W in 0W-20 indicates the cold-start performance of the oil. Using oil with a lower number before the W makes it easier to start the engine in cold weather. The 20 in 0W-20 represents the oil's viscosity characteristics at high temperatures. Oils with higher viscosity (higher values) may be more suitable for high-speed driving or heavily loaded vehicles. Using engine oil for Geely Boyue in cold weather: If SAE 10W-30 or higher viscosity engine oil is used in cold weather, the engine may be difficult to start. Therefore, it is recommended to use SAE 0W-20, 5W-20, or 5W-30 engine oil. Relatively speaking, using 0W-20 oil can maximize fuel savings.

110

Share

Where is the carbon canister purge valve located on the Volkswagen Tiguan?

The carbon canister purge valve on the Volkswagen Tiguan is located beneath the engine hood. Where is the carbon canister purge valve located? The carbon canister of the Volkswagen Tiguan is positioned under the front engine hood, adjacent to the small coolant tank at the upper left corner of the engine. To access it, open the driver's door of the FAW-Volkswagen Tiguan, pull the hood release lever located on the left side of the driver's footwell, and lift the engine hood. The vehicle's carbon canister is situated beneath the hood, at the upper left corner of the engine. Carbon Canister: It is part of the evaporative emission control system, which was introduced to prevent fuel vapors from escaping into the atmosphere after the engine is turned off. The working principle is that after the engine shuts down, fuel vapors mix with fresh air inside the canister and are stored in the activated charcoal canister. When the engine starts, the solenoid valve between the activated charcoal canister and the intake manifold opens, allowing the fuel vapors in the canister to be drawn into the engine cylinders by the vacuum in the intake manifold, where they are burned along with the air-fuel mixture. This not only reduces emissions but also improves fuel efficiency.

110

Share