What tools are needed to remove heat insulation film?

1 Answers
TaliaLynn
07/29/25 9:49pm
To remove heat insulation film, you need to use a heat gun or hair dryer with hot air. Here are the specific details about heat insulation film: 1. Function: Heat insulation film is a type of car film developed to combat summer sunlight and ultraviolet rays. It consists of multiple dense metal layers made of precious metals such as gold, aluminum, silver, nickel, and titanium through vacuum plating or magnetron sputtering. These layers utilize the physical properties of the metals to block heat. 2. Top Ten Brands: The top ten brands of car films are Meiji, LLumar, 3M, V-KOOL, Federal, American BF, American BF, Johnson, Ray-Ban, and Hüper Optik.
Was this review help?
19
5
Share
More Forum Discussions

Where is the car differential installed on the vehicle?

The car differential is installed near the drive wheels. The function of the differential is to meet the requirement that the wheels on both sides rotate at different speeds when the car turns. The car differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. It mainly consists of left and right side gears, two planetary gears, and a gear carrier. The inspection methods for the differential are as follows: 1. Inspection of planetary gears: Check the fit between the planetary gear shaft and the housing hole as well as the inner hole of the planetary gear. The planetary gear shaft and the gear are clearance fit, and they should be replaced if severely worn. When placing the planetary gear shaft into the differential housing bearing hole, no warping is allowed. 2. Inspection of the differential housing: Check the contact surface between the driven bevel gear and the differential housing to ensure they are in full contact. 3. Inspection of the working surfaces of planetary gears and side gears: Obvious peeling or burning on the working surfaces of planetary gears and side gears is not allowed, otherwise they should be replaced. If the damage exceeds 1/4 of the tooth height or 1/5 of the tooth length, replacement is necessary. 4. Inspection of the meshing clearance between planetary gears and side gears: The wear of planetary gears and side gears is determined by checking their meshing clearance.
14
4
Share

What to Do When the Car Door Won't Open from Inside or Outside?

Here are the reasons why a car door won't open from inside or outside: 1. The child lock is engaged. The rear doors of a vehicle are equipped with a child lock, marked by a child symbol on the side of the door. If it is accidentally left engaged when the door is closed, the door will not open. Therefore, always check that the child lock is disengaged before closing the door. Solution: Use a flathead screwdriver to turn the child lock to the disengaged position. 2. The door lock cable is malfunctioning. A faulty cable directly prevents the door from opening. Solution: Replace the door lock cable to restore the door's functionality. 3. The door hinge or lock post is deformed. External force applied to the door can cause the hinge or lock post to deform. Solution: Remove the door and hinge assembly, then replace them with new hinges and lock posts.
8
4
Share

Why is the car throttle not accelerating?

Reasons why the car throttle is not accelerating: 1. Fuel line blockage: First check if the fuel filter is clogged, whether the fuel pump pressure is sufficient, and if the fuel injector is blocked. 2. Exhaust system blockage: Check the three-way catalytic converter and whether there is any blockage in the entire exhaust pipe. 3. Possible excessive carbon buildup in the throttle: The idle position sensor or air flow meter may be damaged. Here are precautions for operating the car throttle: (1) When the vehicle is driving normally, the foot should not be placed on the clutch pedal. (2) While driving, minimize the time of semi-engagement to prevent burning out the clutch friction plate. (3) Do not release the clutch too abruptly. The first gear should be the slowest, while other forward gears should be slightly faster. When starting in first gear, the clutch pedal must be fully depressed. When shifting up, the clutch pedal only needs to be depressed until the clutch friction plate disengages; it does not need to be fully depressed again.
12
0
Share

Can the rear seats of the new Sylphy be folded down?

New Sylphy's rear seats cannot be folded down. Here is more information about the space of the new Sylphy: 1. The Sylphy has obvious space advantages, with an overall spacious interior, especially larger legroom in the rear seats, though the lateral width is relatively narrow. 2. The Sylphy focuses on ride comfort, with integrated seats optimized for ergonomic design based on the human torso. Seats designed with this optimization feature continuous multi-curved surfaces, which allow for very limited folding and bending angles. Therefore, the folding function was abandoned as a trade-off. 3. The Sylphy boasts the largest rear seat space in its class, with a distance of up to 680 mm, and the interior reaches a maximum effective length of 1876 mm. Whether seated in the front or rear, passengers can easily and comfortably adjust to the optimal sitting position.
3
0
Share

How often should the spark plugs of Volkswagen Sagitar be replaced?

Volkswagen Sagitar's spark plugs need to be replaced every 20,000 kilometers. If the spark plugs are not replaced for a long time, it can cause various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in starting, which affects the normal use of the vehicle. Spark plug replacement cycle: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps to replace spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage wires according to the firing order, and then secure the cover.
1
3
Share

What is the fuel tank capacity of the hybrid Odyssey in liters?

The fuel tank capacity of the hybrid Odyssey is 50 liters, as officially announced. Owners who have purchased the hybrid Odyssey can also check this information on the vehicle's configuration sheet. The hybrid Odyssey uses 92-octane fuel, with a fuel consumption of 6.75L per 100 kilometers. A full tank can provide a driving range of approximately 740km. During daily driving, it is important to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is recommended to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.