What to Pay Attention to When Ordering a Car?

3 Answers
VanAaliyah
07/29/25 11:22am
When ordering a car, pay attention to the details of the contract signing, whether the car is a problematic vehicle, and whether the car documents are complete. Pay attention to the details of the contract signing: When signing the car order contract and other contract materials, pay attention to every detail of the contract, especially the difference between 'deposit' and 'down payment'. A single word difference may result in the inability to refund the car order fee. Check whether the car is a problematic vehicle: The most important thing when ordering a car is to inspect the vehicle. Consumers must refuse to accept flooded cars, problematic cars, etc., no matter how much discount the 4S store offers. Whether the car documents are complete: Pay attention to whether the certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, three-guarantee certificate, vehicle user manual, and other documents are complete. If any document is missing, consult the 4S store in time and confirm before ordering the car.
Was this review help?
3
3
Share
LiamDella
08/13/25 6:45pm
I think when ordering a car, it's especially important to keep a close eye on your wallet and avoid impulsive decisions. First, check your budget—don’t just look at the car price; factor in insurance, taxes, and registration fees to avoid overextending yourself. Visit multiple dealerships to compare prices, and don’t hesitate to negotiate boldly for promotions like zero-interest loans or cash discounts. Loan terms, especially interest rates, can be a major pitfall, so read the contract carefully to avoid hidden fees. For add-ons like extended warranties, choose based on actual needs rather than blindly spending extra. Always check the deposit refund policy to avoid being stuck if plans change. If your budget is tight, a used car can be a good option, but make sure to review the vehicle history report—don’t just go for the cheapest option and overlook potential repair costs. In short, staying cautious and leaving some financial flexibility will ensure a worry-free driving experience.
Was this review help?
18
1
Share
Expand All
VonJoseph
10/08/25 4:02am
For families with children, space and safety are top priorities when buying a car. I would first test drive a few models to check if the back seat is spacious enough and whether the trunk can accommodate a stroller or tent. Fuel efficiency is also crucial to calculate carefully, as daily school runs add up—choosing a fuel-efficient model is more cost-effective in the long run. Child seat anchor points must be inspected to ensure they are secure and reliable, with no corners cut. Safety features like blind-spot monitoring are vital for protecting the family in critical moments. Don’t just be drawn to flashy designs—practical aspects like how quickly the air conditioning cools in summer matter. When negotiating the price, mention family needs; sometimes, this can secure extra discounts or free installation services like roof racks. Confirm the delivery timeline to avoid disrupting daily routines.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What is the appropriate tire pressure for a compact SUV?

The recommended tire pressure for a compact SUV is between 2.2 and 2.5 bar. Driving with insufficient tire pressure can lead to noticeable increases in fuel consumption. This is because low tire pressure increases the contact area between the tires and the road surface, resulting in greater friction and higher driving resistance, which in turn raises fuel consumption. Additionally, inadequate tire pressure accelerates tire wear, shortening the tire's lifespan. Therefore, maintaining proper tire pressure is crucial for driving safety, tire longevity, and optimal performance. This is especially important for long-distance or high-speed driving, so always check your tire pressure thoroughly before setting off.
10
2
Share

What is the wading depth of the H9?

The maximum wading depth of the Haval H9 is 700mm. The wading depth of the Haval H9 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low ground clearance, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Haval H9 is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to waterlogging, observe warning water level markers, trees, or reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the height of the engine's air intake, do not proceed. Instead, choose an alternative route.
19
1
Share

What does TPMS mean when it appears on the car dashboard?

The appearance of TPMS on the car dashboard indicates a fault in the Tire Pressure Monitoring System, signaling that one of the tires has low pressure. Tire pressure monitoring is divided into direct and indirect types. If the TPMS warning light comes on while driving, it may indicate that one of the tires has low pressure. In such a case, the driver should avoid sharp steering and emergency braking, reduce speed, and slowly pull over to the side of the road to check the tire pressure. If the vehicle has simple tools, the driver can measure the tire pressure and inflate the tire themselves. If not, they should seek a nearby repair shop for inflation. However, if the light is on but the tires are not the issue, it may indicate an abnormality with the tire pressure sensor.
13
0
Share

Where to Find the Engine Model of Mazda 8?

Mazda 8's engine model can be found on the front rotor cylinder block near the oil dipstick by the front windshield. This vehicle is equipped with two engine options: a 2.3L MZR turbocharged engine and a 2.3L MZR inline 4-cylinder naturally aspirated engine, with maximum power output of 120kW and maximum torque of 209Nm. The Mazda 8 is a 7-seater MPV with dimensions of 4868mm in length, 1850mm in width, and 1685mm in height, featuring a wheelbase of 2950mm. The new Mazda 8 is positioned as a mid-to-high-end luxury MPV, equipped with features such as power seats, 4 SRS airbags, 5-speed automatic transmission, cruise control system, and TCS system.
3
3
Share

How to Determine if the Engine PCV Valve is Damaged?

Methods to determine if the engine PCV valve is damaged: 1. Check if there is blue smoke coming from the exhaust pipe. A damaged PCV valve can cause the car to burn oil, resulting in severe blue smoke from the exhaust. 2. Due to the PCV valve failure causing oil burning, the oil will also be consumed quickly, leading to increased oil consumption. 3. Open the oil filler cap. If there is strong suction (meaning the cap is pulled in), it indicates a problem with the PCV valve. Reasons for PCV valve damage: 1. Poor quality of the PCV valve itself. 2. Improper maintenance. 3. Poor fuel quality. 4. Aging of the PCV valve. The PCV valve operates under high engine temperatures and may degrade over time.
11
5
Share

Is it necessary to install a license plate frame for a new car?

It is necessary to install a license plate frame for a new car, as it can prevent the car body from being scratched by the license plate. Installing a license plate frame can also reduce the possibility of theft, making it quite practical in terms of functionality. A license plate, commonly known as a car plate, is a panel hung separately at the front and rear of the car. The materials typically used include aluminum, iron, plastic, or paper, with the car's registration number, registration region, or other relevant information engraved on it. The license plate serves as a numbering and information registration system for vehicles. Its primary function is to identify the region to which the vehicle belongs through the license plate, and it also allows tracking the vehicle's owner and registration information based on the plate.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.