···
Log in / Register

What to Pay Attention to After Picking Up a New Car

4 Answers
VanCarter
07/29/25 11:56am

When picking up a new car, you should pay attention to the following: 1. Park the vehicle in an outdoor area with sufficient light, inspect the body paint to ensure there are no scratches or wear, check if the paint is even, and observe if the paint appears translucent under sunlight reflection; 2. Open the car door—the vehicle identification plate is usually located near the driver's side door or B-pillar—and verify the relevant information on the plate; 3. Open the engine compartment to check if it is clean, free of dirt or dust buildup, and ensure the oil and other fluids are at adequate levels; 4. Manually test the smooth operation of door opening/closing, check if the windows roll up and down properly, confirm there are no strong odors inside the cabin, verify the air conditioning cools effectively, ensure the wipers function correctly, and check that all lights turn on properly; 5. Start the engine to feel if it idles smoothly, listen for any noticeable noise inside the cabin, and check if the steering wheel vibrates significantly; 6. Verify that all relevant vehicle documents are complete, including the purchase invoice, certificate of conformity, vehicle conformity certificate, vehicle registration certificate, warranty certificate, owner's manual, and new car delivery confirmation form.

Was this review help?
14
3
Share
DelAthena
08/13/25 9:16pm

After getting a new car, I usually start with the exterior, walking around the vehicle to check for any scratches or dents on the paint, especially around the door panels and wheel areas, to prevent damage from transportation. Tire pressure must meet the standard; use a tire pressure gauge to ensure it's within the recommended range to avoid hazards during high-speed driving. Testing the lights, including headlights, turn signals, and brake lights, ensures safe nighttime driving. Opening the hood to check the levels of engine oil, coolant, and brake fluid is crucial before the first drive to prevent potential issues. During driving, I pay special attention to the break-in period, maintaining a speed of 60 to 80 km/h for the first 1000 kilometers and avoiding sudden acceleration or braking to extend the engine's lifespan. Don't forget regular maintenance; after three months or 5000 kilometers, take the car to the shop for an oil and filter change to identify any problems early. These small steps might seem trivial, but they ensure the car is safer and more durable in the long run.

Was this review help?
20
0
Share
Expand All
VanAlessandra
10/08/25 7:25am

I get really excited when it comes to new cars, but I'll keep myself in check. After picking up the car, I'll first find an open area to conduct some simple tests—checking if the brakes and steering are responsive and ensuring there are no unusual noises. Interior setup is also crucial; adjusting the seat and rearview mirror positions to find the most comfortable driving posture, while also connecting my phone via Bluetooth to test the audio and navigation systems. When refueling, I opt for high-quality gasoline to observe actual fuel consumption performance. During the break-in period, I avoid long-distance high-speed driving, sticking mainly to city roads for the first two weeks to get accustomed to the car, keeping the speed below 80 km/h. Don't forget to handle insurance and license plate registration within the first week—this ensures coverage in case of any incidents. Avoid washing the car too frequently, using mild detergents to protect the paint. Through these steps, the car can quickly adapt to my habits, making the driving experience smoother.

Was this review help?
7
0
Share
Expand All
IrisFitz
11/21/25 8:44am

After getting a new car, I carefully inspect every detail. For the interior, I first check the seats, door panels, and dashboard for any flaws, then adjust the air conditioning to a comfortable temperature to test its performance. The lighting system must be tested one by one, including interior lighting and external signal lights. When driving, start and brake gently, maintaining a steady speed during the break-in period to extend engine life. Don't overlook the first maintenance schedule—usually, an oil change is needed after three months or 5,000 kilometers. After filling up the tank, monitor fuel consumption changes to help adapt to driving habits. For safety, install a dashcam and get insurance promptly. These details ensure peace of mind for every trip.

Was this review help?
15
0
Share
Expand All
More Forum Discussions

Where is the Crown electric fan relay located?

The Crown electric fan relay is located inside the engine compartment fuse box under the hood. Its functions include: 1. Expanding control range; 2. Amplifying control force; 3. Integrating signals; 4. Enabling automatic, remote, and monitoring operations. Taking the 2018 Crown Pioneer edition as an example, its body dimensions are: 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm. The 2018 Crown Pioneer edition is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 235PS and a maximum power of 173kW, paired with an 8-speed automatic transmission.
16
0
Share

Where is the FAW-Volkswagen Tayron produced?

FAW-Volkswagen Tayron is produced at the FAW-Volkswagen Tianjin plant, which is a highly advanced factory in terms of concept, equipment, technology, scale, production capacity, and personnel configuration. The Tayron is a German premium mid-size SUV launched by FAW-Volkswagen, with body dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. The FAW-Volkswagen Tayron is equipped with the EA888 2.0T turbocharged engine and features the DQ500 seven-speed wet dual-clutch transmission, delivering a maximum power of 110kW and a maximum torque of 250Nm. The front suspension of the vehicle is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
19
2
Share

Where is the radiator located on the Roewe RX8?

The radiator of the Roewe RX8 is located behind the air conditioning condenser. You can see the upper cover of the radiator by opening the engine compartment, and the exact position of the radiator can be clearly viewed after removing the front bumper. The car radiator, also known as the heat exchanger, is a key component in the vehicle's cooling system, designed to dissipate heat. The Roewe RX8 is a model under SAIC Motor, with dimensions of 4923mm in length, 1930mm in width, and 1810mm in height, and a wheelbase of 2850mm. It is equipped with a 2.0TGI direct-injection turbocharged engine, delivering a maximum power of 165kW and a peak torque of 360Nm, paired with a longitudinal Aisin 6AT transmission.
2
3
Share

Which brand does Haval belong to?

Haval is a brand under China's Great Wall Motors. As an SUV-focused brand, Haval operates parallel to the Great Wall brand with its independent logo 'Haval', along with separate systems for product development, production, and services, primarily engaged in SUV manufacturing and sales. The Haval lineup includes three series: H series, F series, and M series. For example, the Haval H6 is a compact SUV with body dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, featuring a wheelbase of 2738mm. The Haval H6 is equipped with a MacPherson strut front suspension and a multi-link independent rear suspension.
14
1
Share

What Causes Slight Needle Fluctuation on a Motorcycle's Idle Tachometer?

Motorcycle's idle tachometer needle slight fluctuation may be caused by poor contact in the tachometer coil. Purpose of the tachometer: The tachometer can be used to determine whether the vehicle is truly started. Some novice drivers often struggle to confirm successful ignition and may turn the key again, which can damage the starter motor. Working principle of the tachometer: It operates based on the centrifugal force of rotating masses and the principle of angular or proportional rotation. When the tachometer's shaft rotates, the centrifugal weights on the flyweight assembly move outward due to inertial centrifugal force, driving the needle through a transmission mechanism.
9
0
Share

What is the method to reset the tire pressure light on the Borgward BX7?

Borgward BX7 tire pressure light reset method is: 1. Turn on the ignition lock without starting the vehicle; 2. Locate the round button on the right side of the center console; 3. Rotate the button left or right to select vehicle information; 4. Follow the on-screen prompts to select the reset button. The Borgward BX7 has body dimensions of: length 4715mm, width 1911mm, height 1690mm, and a wheelbase of 2760mm. The Borgward BX7 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224PS, maximum power of 165kW, maximum torque of 300Nm, and is paired with an eight-speed dual-clutch transmission.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.