What to Do with China V Vehicles When China VI Standards Are Implemented?

1 Answers
StElena
07/25/25 9:11am
If the vehicle is China V or China IV, the implementation of China VI standards will not affect its normal operation on the road, as purchased vehicles are subject to the emission standards at the time of purchase. As long as they meet the standards, they can continue to be driven. However, after the implementation of China VI emission standards, the resale value of new China V vehicles will decrease compared to before, increasing the cost of vehicle replacement. The differences between China V and China VI are: Different carbon monoxide emission requirements: China V vehicles have a carbon monoxide content of 1000mg per kilometer; China VI vehicles have a carbon monoxide content of 500mg per kilometer. Different letter representations: China V is represented by 'V'; China VI is represented by 'VI'. 3. Different issuing departments: China V standards were issued by the Ministry of Environmental Protection; China VI standards were issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine.
Was this review help?
6
5
Share
More Forum Discussions

What to Do When the Radiator Temperature is Too High?

After pulling over, you should not turn off the engine immediately. Open the hood, turn on the heater to dissipate heat as quickly as possible, and make sure to park in a shaded area. Next, check if the coolant level is sufficient. This situation often occurs when the owner neglects to top it up in time. Inspect whether the cooling fan is functioning properly. If it's an electrical issue, it's best to leave it to professionals at a 4S shop for repair.
20
1
Share

What is the fuel consumption of the BMW X6?

The fuel consumption of the BMW X6 is 9.2-10L/100KM. The currently available BMW X6 models include the 2022 xDrive40i M Sport Package, 2022 xDrive40i Premium M Sport Package, and 2022 xDrive30i M Sport Package. In the same class, the Mercedes-Benz GLE Coupe has an NEDC combined fuel consumption of 8.9-9.0L/100KM, while the BMW X5 has an NEDC combined fuel consumption of 9.1-10L/100KM. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid sudden hard acceleration, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, which helps save fuel. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can improve by up to 20%. Maintain proper tire pressure: Keep tire pressure at the manufacturer's recommended level. For every 2 PSI below the recommended value, fuel consumption increases by 1%. Regular vehicle maintenance or inspections: Timely oil changes can reduce carbon buildup; regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage recommendations. Close windows while driving. Open windows increase wind resistance, which in turn increases the vehicle's resistance, requiring more power and thus increasing fuel consumption.
3
4
Share

How to Apply for Study-Based Point Reduction?

Log in to the Traffic Management 12123 APP, click [More] on the homepage to enter the business center. Select [Study-Based Point Reduction] under the "Education and Learning Business" module to enter the application page. Choose [Online Learning], fill in the relevant information, submit the [Application], and read and agree to the "Business Requirements". After completing [Real-Name Authentication], start video learning. Upon completion of the learning, you can proceed to the exam. If you pass the exam, you can check the record in [Online Progress].
15
1
Share

How to adjust the time on a Peugeot 307?

First, insert the key into the ignition and turn it to start the vehicle. The instrument panel will only illuminate after the engine is running. Press the MENU button, then navigate to the settings option displayed in the upper right corner of the MMI screen. Within the settings menu, select the corresponding MMI control panel button to proceed. Once inside, use the instrument panel adjustment buttons to set the correct time. The up/down keys cycle through options, displaying flashing values for year, month, day, hour, and minute respectively.
20
1
Share

What to Do If There Are Ants in the Car?

Find a piece of newspaper, take a piece of milk candy, melt it under the sun, then place the melted milk candy on the newspaper and put it in the area of the car where there are more ants. Spray chemical insecticide directly at the entrance of the ant nest and its surroundings, then open the car windows to let the smell dissipate. Place a poison bait in every small corner of the car, allowing the ants to drag it away, which will help eliminate the entire nest of ants.
2
5
Share

What is the engine model of the Geely Borui?

Geely Borui's engine model is JLE-4G18TDC. Geely Borui Engine: The Geely Borui is equipped with Geely's latest 1.8L turbocharged direct injection engine. This engine delivers a maximum power of 120kW at 5500rpm and a peak torque of 250Nm between 1500-4500rpm. It is paired with a 6-speed automatic transmission, which is the familiar 6AT developed after Geely's acquisition of the Australian automatic transmission company DSI. This transmission has been widely used in many models and is technically quite mature. Driving Experience: The Borui 1.5T features a three-cylinder turbocharged engine. Despite being a three-cylinder unit, it still offers robust power and excellent acceleration. Passengers in the rear seats can also feel the strong power output during acceleration. This performance fully meets the daily needs of consumers. If driven moderately, the vehicle provides a smooth and comfortable ride.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.