What to Do When Your Car Tire Goes Flat on the Road?

1 Answers
AnnieLee
07/28/25 3:55pm
You can choose to call for roadside assistance or change it yourself. Below is an introduction to car tires: 1. Overview: Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth operation. They also maintain strong adhesion between the wheels and the road, improving traction, braking, and off-road capability. Additionally, they bear the weight of the vehicle, making their role increasingly important. 2. Usage Tips: (1) Avoid abrupt starts; whether the car is empty or loaded, always start smoothly at low speed to prevent tire drag and reduce tread wear. (2) On good roads, drive straight ahead. Avoid unnecessary swerving or sharp turns, except when overtaking or avoiding obstacles, to prevent lateral cutting damage between the tire and rim. (3) When descending long slopes, adjust speed appropriately based on gradient, length, and road conditions. On steep, long, or complex roads, use gear driving and mild braking to control downhill speed. This not only avoids emergency braking and reduces tire wear but also enhances driving safety.
Was this review help?
7
1
Share
More Forum Discussions

What are the warning lights on the car dashboard?

Car dashboard warning lights include the engine oil warning light, engine fault warning light, coolant temperature warning light, brake system warning light, tire pressure warning light, etc. When a warning light illuminates, it indicates a corresponding issue. Car dashboard warning lights: Engine oil warning light; The oil light is a safety alarm device for the engine lubrication system. If the oil light flashes while driving, the engine must be turned off immediately for inspection. Continuing to drive may cause engine damage and compromise driving safety. Engine fault warning light; The engine fault signal is issued by the engine control unit (ECU), which manages all electronic components of the engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering systems like intake, exhaust, fuel, ignition, and timing. Coolant temperature warning light; When this light turns on, it usually indicates overheating. If the coolant temperature reaches 100°C while driving, the temperature warning light will illuminate, commonly referred to as "boiling over." When this happens, pull over safely but avoid shutting off the engine immediately, as overheating can cause engine components to expand and lead to damage upon shutdown. Brake system warning light; This light illuminates when the parking brake is engaged. If it remains lit after releasing the parking brake, it signals a brake system issue, often due to low brake fluid levels or worn brake pads. Continued driving under these conditions risks vehicle integrity and driver safety. Tire pressure warning light; If this light activates, determine whether the pressure is too high or too low. Excessive pressure increases the risk of a blowout, so reduce tire pressure accordingly. Insufficient pressure harms tires and increases fuel consumption—reinflate promptly and inspect for punctures causing leaks. The battery indicator displays the status of the car battery, typically in red or yellow. It lights up during ignition self-check and should turn off after starting. If it stays on, the battery requires inspection or replacement. Power steering fault light; Illumination while driving indicates a malfunction in the power steering system, possibly resulting in reduced or lost assistance. Steering effort will significantly increase, and professional diagnosis is required as this issue cannot be self-repaired. Electronic Stability Control (ESC) indicator; This yellow light shows the ESC system's operational status. Normally, it remains off unless there's a fault or the system is actively engaged.
11
3
Share

What does 'other maintenance' for Teana mean?

Teana's 'other maintenance' refers to the need to replace other fluids. The maintenance schedule and precautions for Teana are as follows: Teana's maintenance schedule: According to the official maintenance schedule, engine oil and oil filter only require routine inspection during the first maintenance. After the second maintenance at 5,000 kilometers, they should be replaced every 5,000 kilometers. The air filter and cabin air filter should be replaced every 20,000 kilometers, with the manufacturer recommending an inspection every 10,000 kilometers. Brake fluid should be replaced every 40,000 kilometers, while spark plugs have a replacement interval of up to 100,000 kilometers. Precautions for Teana maintenance: Under Teana's warranty coverage, within 60 days or 3,000 kilometers of purchase, if major components of the engine or transmission develop problems, consumers can opt for a free replacement of the entire engine or transmission assembly. Additionally, Teana provides two free maintenance services within 1 month or 1,000 kilometers and 3 months or 5,000 kilometers. The first maintenance includes free labor charges (requiring inspection of engine oil and oil filter), while the second maintenance covers both free labor and parts costs. It's important to note that both maintenance services must be performed within the specified time frames; otherwise, the owner will be deemed to have forfeited the right to free maintenance.
7
3
Share

Is there a night test for Subject Three?

Subject Three includes a night test. The Subject Three examination is divided into daytime and nighttime tests, with the nighttime test accounting for a very small proportion. Individual tests are conducted by coaches leading the team to participate in a lottery. If the daytime test is drawn, the nighttime test will not be taken, and vice versa. Content of the Subject Three night test: The night test involves switching between high and low beams. The driving distance during the night test is shorter than during the daytime test. Controlling speed and managing lights properly make it relatively easier to pass. Basic items of the Subject Three test: There are 13 basic items in the Subject Three test, including vehicle preparation, starting, straight-line driving, changing lanes, passing intersections, pulling over, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. Notes and tips for the Subject Three night test: Pay attention to the use of lights: Turn on the vehicle lights when starting the car. Before moving, check the turn signals. During driving, ensure the correct use of low and high beams. When meeting vehicles, non-motorized vehicles, or pedestrians, switch from high to low beams when the distance is less than 150 meters. If the oncoming vehicle does not switch off its high beams, the examinee can flash the high and low beams to signal the oncoming vehicle to switch off its high beams. When overtaking, flash the high and low beams to signal the vehicle ahead to give way. If a vehicle behind flashes its high and low beams during driving, give way as soon as conditions permit. Reduce speed: Nighttime driving narrows the field of vision and shortens the viewing distance, so it is essential to slow down. After completing the operations during the night test, if the examiner requests to turn off the engine, first activate the turn signal and pull over. Then, shift to neutral, engage the handbrake, turn off the turn signal and headlights, release the clutch and brake pedals, and finally turn off the engine with the key.
15
3
Share

What is the real fuel consumption of the Honda Crosstour 2.4?

The real fuel consumption of the Honda Crosstour 2.4 is around 10.2L/100KM. Actual fuel consumption is influenced by many factors. Below is an introduction to the factors affecting a car's fuel consumption: 1. Engine thermal efficiency: From a purely technical perspective, direct fuel injection is an excellent technology that significantly improves fuel combustion efficiency, but it places higher demands on the engine's fuel supply system and cylinder materials. 2. Resistance encountered by the car: (1) Gradient resistance: When a car is driving on an inclined road, the component of its gravity along the road direction manifests as gradient resistance. Clearly, this is mainly related to the car's weight. The heavier the car and the steeper the slope, the greater the force that needs to be overcome, and the higher the car's fuel consumption. (2) Acceleration resistance: When a car accelerates, there is an inertial force present, which is the car's acceleration resistance. According to the momentum theorem, the greater the car's mass and the greater the acceleration, the greater the resistance. Therefore, the heavier the car and the faster it accelerates, the higher the fuel consumption. Generally speaking, the engine's thermal efficiency and the car's mechanical efficiency are designed when the car leaves the factory and cannot be changed, while the car's driving resistance can be controlled. The biggest factor affecting a car's driving resistance is its weight. As long as the car's weight is reduced, the car's fuel consumption will significantly decrease.
11
2
Share

Can a temporary ID card be used for the Subject 1 test?

A temporary ID card can be used for the exam. The admission ticket and other documents are handled by the driving school, which will distribute them during the exam. Electronic ID cards cannot be used for the test. If you do not have an ID card, you can apply for a temporary one. A temporary ID card holds the same validity as a regular ID card. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 test can be taken twice on the same day. If you fail the first attempt, you can take a free second attempt. If you fail the second attempt, the Subject 1 test will be terminated, and you can only reschedule the test after ten days. The Subject 1 test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point and a total score of 100. If you answer 11 questions incorrectly during the test, the system will automatically submit the paper and end the exam. The Subject 1 test is conducted on a computer, and the duration is 45 minutes. Subject 1 test content: Regulations on driver's licenses and motor vehicle management; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should pay attention to their attire during the test—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, the identity verification station will assign a seat. After finding your seat, begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score sheet and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, with one retake if you fail. If you do not take the retake or fail it, the test will be terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security's Order No. 123) does not include "Subject 4."
10
3
Share

Should You Slow Down When Changing Lanes?

You should not slow down when changing lanes. The reasons are as follows: 1. Safety hazard: Hesitation when changing lanes can affect the vehicles behind and even cause accidents. 2. Courteous behavior: Accelerating while changing lanes allows for a smoother drive for the following vehicles, eliminating the need to reduce throttle or apply additional brakes, which is also a considerate driving behavior.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.