What to Do When Your Car Key Gets Wet and Won't Work?

How to Enter Power-On Mode with One-Key Start?

The method to enter power-on mode with one-key start is: 1. Press once without stepping on the brake pedal to power on some electronic devices; 2. Press twice consecutively to power on the entire vehicle and initiate self-check; 3. Step on the brake pedal and press once to start the engine with one-key start. One-key start is a button device designed to simplify the starting process, which can also be used to turn off the engine. This device can be retrofitted at the original key lock position or on an independent panel. The one-key start is commonly referred to as the key with serrations or grooves, which serves as a backup to use the mechanical starting method when the one-key start function fails. Vehicles equipped with one-key start function do not require inserting a key, but they all have a key insertion position.

20

0

Share

Can National II Emission Standard Vehicles Still Be Driven?

In today's society, if National II emission standard vehicles want to be driven on the road, they need to undergo extremely strict inspections. For family-use 5-seat sedans and 7-seat SUVs, non-operational small and micro vehicles have no usage lifespan limit. Starting from July 1, 2019, all newly produced light vehicles sold and registered in our province must meet or exceed the China 6a emission standard requirements. From the same date, all heavy-duty gas vehicles produced, imported, sold, or registered in the province must comply with the China 6a emission standard. For vehicles purchased before the specified date or transferred into the province from other regions (based on the transfer registration date in the vehicle registration certificate) that meet the China 5 emission standard requirements, the traffic management department of the public security authority can process vehicle registration procedures within one month after the specified date. Registrations will not be processed after this deadline.

2

0

Share

What is the measurement method for an oxygen sensor?

The measurement method for an oxygen sensor is as follows: 1. Unplug the oxygen sensor connector and use a multimeter in resistance mode to measure the resistance between pins 1 and 2 on the sensor side; 2. Locate the oxygen sensor signal wire and insert a copper wire from the cable into the corresponding pin hole; 3. Reconnect the connector and use a multimeter in DC voltage mode to measure the voltage between the copper wire and the negative terminal; 4. Start the engine and allow the coolant temperature to reach above 80°C, then maintain the engine speed at 2500 rpm multiple times and observe the voltage displayed on the multimeter. The oxygen sensor is a crucial feedback sensor in the electronic fuel injection engine control system, playing a key role in controlling vehicle exhaust emissions, reducing environmental pollution, and improving fuel combustion quality in automotive engines.

3

0

Share

How to Replace the Air Filter in a Citroën?

Citroën air filter replacement method is: 1. Open the engine hood and locate the air filter; 2. Gently release the two clips securing the filter box cover, then lift the entire air filter box cover; 3. Lift the air filter box cover and remove the old air filter; 4. Install the new air filter, close the box cover, and fasten the clips. Taking the 2018 Citroën DS5 as an example, it belongs to the mid-size car category with body dimensions of: length 4530mm, width 1871mm, height 1520mm, wheelbase 2727mm, fuel tank capacity 60L, and curb weight 1600kg.

5

3

Share

What is the 0 to 100 acceleration time of the Accord Hybrid?

The 0 to 100 acceleration time of the Accord Hybrid is 7.5 seconds. The 0-100 km/h acceleration time refers to the time it takes for a car to accelerate from 0 to 100 km/h, which is a direct reflection of the vehicle's power. Taking the 2021 Accord Hybrid as an example, its body dimensions are: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, fuel tank capacity 48.5l, trunk capacity 574l, and curb weight 1619kg. The 2021 Accord Hybrid features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146ps, maximum torque of 175nm, and maximum power of 107kw, paired with an electronic continuously variable transmission.

14

5

Share

What does XLE mean in the Avalon?

Avalon's XLE is the name used for the trim level of the model. The Avalon is a mid-size sedan under Toyota, which is equipped with three types of engines: a 2.0L naturally aspirated engine, a low-power version 2.5L naturally aspirated engine, and a high-power version 2.5L naturally aspirated engine. Taking the 2019 Avalon Hybrid as an example, it belongs to the mid-size car category with body dimensions of 4975mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2870mm and a fuel tank capacity of 49L. The 2019 Avalon Hybrid is powered by a 2.5L naturally aspirated engine, delivering a maximum horsepower of 178PS, a maximum torque of 221Nm, and a maximum power of 160kW, paired with an E-CVT continuously variable transmission.

15

2

Share

What to Do When Your Car Key Gets Wet and Won't Work?

How to Enter Power-On Mode with One-Key Start?

Can National II Emission Standard Vehicles Still Be Driven?

What is the measurement method for an oxygen sensor?

How to Replace the Air Filter in a Citroën?

What is the 0 to 100 acceleration time of the Accord Hybrid?

What does XLE mean in the Avalon?

Is it necessary to check tire pressure?

When to Use the Plus or Minus on Automatic Transmission D Gear?

What is the Voltage of Car Power Supply

What is the symbol of a circle with an 'a' inside?