What to Do When There Are Many Small Rust Spots on the Car Paint Surface?

2 Answers
MacLila
07/29/25 8:18am
First, try using a wet towel or cloth to wipe the car body to see if the small rust spots can be removed. If they can be removed, you can handle it yourself. Gently scratch with your fingernail to see if it can be scraped off. If it can, it is likely tree sap or organic matter from the air that has fallen on the car and adhered over time. First, try using a clay bar. Wet the clay bar and vigorously rub it on the areas with rust spots, then rinse with clean water. If that doesn't work, you can also use a specialized iron remover spray on the rust spots on the car body, then rinse thoroughly with water.
Was this review help?
5
3
Share
LawsonFitz
08/12/25 11:29am
When I first noticed the small rust spots on my car's paint, I was a bit worried and immediately took action to clean them: First, I washed the entire car with a mild car shampoo, focusing on scrubbing the rust spots to remove surface dust and grease. Then, I bought a specialized rust remover and sprayed it on, waiting a few minutes for the solution to penetrate the rust stains before gently rubbing them off with a soft cloth. If the rust wasn't deep, after this treatment, I touched up the spots with a matching paint pen to cover them, and finally applied wax to protect the paint and prevent recurrence. When parking daily, I avoid shaded or damp areas to reduce the accumulation of rainwater and dirt that could lead to new rust spots. After washing the car, I make it a habit to inspect the body, filling in small scratches with wax as soon as they're spotted to keep the paint smooth and tidy. With these preventive measures in place, rust spots no longer trouble me.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What does 'normal' mean in a car in Chinese?

normal refers to the standard driving mode. It is the standard mode of the car, which is the most commonly used mode. In this mode, all aspects of the car's performance are the most balanced, such as fuel economy, quietness, and power. Below is relevant information about car modes: 1. SPORT mode, also known as the power mode. As the name suggests, in this mode, the car's power performance is the most important, and other aspects (such as fuel economy) are all compromised, as long as the car's power reaches its best. 2. In power mode, the vehicle can achieve strong acceleration and also change the steering feel. However, fuel consumption will increase in this mode. 3. ECO mode, also known as the economy mode (or energy-saving mode). The name ECO is derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power).
8
2
Share

How many cylinders does the Honda Civic engine have?

The Civic is equipped with a 1.0-liter turbocharged three-cylinder engine and a 1.5-liter turbocharged four-cylinder engine. Here are the details about the Civic: 1. The 1.0-liter turbocharged engine has a maximum power of 92 kW, a maximum torque of 173 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 2000 to 4500 rpm. This engine features direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 2. The 1.5-liter turbocharged engine has a maximum power of 130 kW, a maximum torque of 226 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1800 to 5500 rpm. This engine also features direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission. 3. The Civic's front suspension uses a MacPherson strut independent suspension, while the rear suspension uses a multi-link independent suspension. 4. The Civic offers excellent power and handling.
20
3
Share

What are the engine specifications of the Geely Icon?

JLH-3G15TD is the engine model used in the Geely Icon, with a maximum horsepower of 177, a maximum power of 130KW, a maximum power speed of 5500rpm, and a peak torque of 255N.m. The Geely Icon is equipped with a three-cylinder engine, which is domestically produced and jointly developed by Volvo and Geely. For daily maintenance of the Geely Icon's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
5
Share

Can a Spare Tire Be Used for a Long Time?

No, if a spare tire is not used for a long time, it will gradually age, leading to a significant decline in its safety performance. Therefore, spare tires are not suitable for long-term use, and their performance is also inferior to that of original tires. It is essential to regularly inspect the spare tire in daily life. Below is relevant information about car spare tires: 1. There are two types of spare tires for cars: full-size spare tires and non-full-size spare tires. A full-size spare tire matches the dimensions of the original tire, while a non-full-size spare tire is smaller than the original tire. However, both types of spare tires share one important consideration: their width may not necessarily match the original tire, and their performance may not be as good. Thus, the use of spare tires has limitations. 2. Generally, spare tire inspections mainly focus on checking tire pressure, wear, and cracks. If the tread wear reaches the wear indicator line, the tire should be replaced as soon as possible. If there are fine cracks on the tire sidewall, the spare tire should not be used for long-distance or high-speed driving, as the sidewall is thinner and more prone to blowouts at high speeds.
19
4
Share

What to Do When Scraping a Little Paint Off Someone Else's Car While Reversing?

When you scrape a little paint off someone else's car while reversing, you can resolve the dispute through insurance and third-party liability insurance. The extent of the paint damage should be assessed to determine the necessary touch-up. If the damage is severe or the other car owner is not present, you can call the traffic police (e.g., dial 122) to handle the situation. Below is relevant information about car paint touch-up: 1. If the scratch is severe, it should be repaired promptly to prevent the steel plate from rusting. When touching up the paint, ensure you use paint produced by a reputable manufacturer and hire a qualified professional painter. The paint used for touch-ups should be low-temperature baked, not the original high-temperature baked paint. 2. The touch-up paint color should be adjusted to closely match the current color of the car. Over time, car paint fades, so relying solely on the original factory color may result in noticeable differences. Therefore, the paint should be mixed on-site to achieve the best match for the current vehicle color. Additionally, choose a qualified and professional paint shop for the touch-up.
18
3
Share

What is the replacement interval for the Levin air filter element?

According to the vehicle's maintenance manual, it is generally recommended to replace the air filter element every 15,000 kilometers or 9 months. The location of the air filter element varies depending on the intake type and engine structure. There are two types of air filter elements in vehicles: dry type and wet type. The dry type is made of paper or organic materials, while the wet type is made of metal wire mesh. Function of the air filter element: It filters out particulate impurities in the air, ensuring that sufficient clean air enters the cylinders, preventing airborne dust from being sucked into the engine and accelerating the wear of the piston group and cylinders. Air filter element: It is a type of filter, also known as an air filter cartridge, air cleaner, or air style. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that sufficient and clean air enters the cylinders. A dirty air cleaner: Using a dirty air cleaner while driving can lead to insufficient engine intake, incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air cleaner clean. The automobile air cleaner is a device that removes particulate impurities from the air, consisting of one or several components that clean the air. Its main function is to filter out harmful impurities in the air before it enters the cylinders, reducing early wear of the cylinders, pistons, piston rings, valves, and valve seats. Thus, air must pass through the fine filtration of the air cleaner before entering the cylinders. A dirty air cleaner can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air cleaner, if minimal dust and light blockage are found, it can be cleaned by blowing compressed air from the inside out and reused. Severely dirty air cleaners should be replaced promptly.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.