What to Do When the Volume Knob Malfunctions?

How to Remove Car Film Adhesive?

Apply vinegar evenly on the adhesive with a cotton swab, then scrub back and forth with the cotton swab. Finally, wipe it off with a paper towel, and it will be as clean as new. When essential balm first comes into contact with the adhesive, there may be no obvious change. However, persistent scrubbing with a cotton swab will speed up the reaction, and eventually, the adhesive will be completely removed. Brush alcohol onto the adhesive on the glass, and you will see the adhesive slowly soften and dissolve. It can then be easily peeled off by hand.

8

0

Share

Differences between Trumpchi GS5 235T and 270T?

The differences between the 235T and 270T models mainly lie in two aspects: power and emission standards. Below is a detailed introduction to their specific differences: 1. Emission standards: All 235T models comply with the China V emission standard; all 270T models comply with the China VI emission standard. 2. Power: Both the 235T and 270T are equipped with a 1.5T inline 4-cylinder turbocharged engine, but the 235T model is the low-power version, while the 270T model is the high-power version. The 235T model has a maximum power of 112KW, maximum horsepower of 152PS, maximum torque of 235N·m, maximum power speed of 5000rpm, and maximum torque speed range of 1450~4250rpm. The 270T model has a maximum power of 124KW, maximum horsepower of 169PS, maximum torque of 265N·m, maximum power speed of 5000rpm, and maximum torque speed range of 1700~4000rpm. 3. Transmission: One variant of the 235T is equipped with a 6-speed manual transmission, while the rest of the models, like the 270T, are equipped with a 6-speed automatic transmission. 4. Fuel consumption: There will certainly be differences in fuel consumption. 5. Configuration: Overall, the 270T has more abundant configurations. The configurations vary significantly among different models.

13

2

Share

What is the car starting procedure?

After getting into the car, adjust the seat to a comfortable position and fasten the seat belt. Start the car, then press the clutch pedal with your left foot and shift into first gear. Turn on the left turn signal and honk the horn. Press the accelerator pedal with your right foot, slowly release the clutch pedal with your left foot, steady the steering wheel with your left hand, and hold the front end of the handbrake with your right hand. When you hear the engine sound increase, quickly release the handbrake.

6

3

Share

How to Connect Two 12V Batteries in Series to Make 24V?

Use a wire to connect the positive terminal (red connector) of Battery A to the negative terminal (black connector) of Battery B. Then, connect the negative terminal (black connector) of Battery A with a wire; use another wire to connect the positive terminal (red connector) of Battery B. The negative terminal (black connector) of Battery A and the positive terminal (red connector) of Battery B will then provide 24V.

13

4

Share

How to Shift Gears While Driving?

Lift the accelerator pedal while depressing the clutch pedal, and simultaneously move the gearshift into the neutral position (these three actions are performed simultaneously). While lifting the clutch pedal, quickly depress and release the accelerator pedal, which means giving a quick blip of the throttle (releasing the clutch and blipping the throttle are done simultaneously). While depressing the clutch pedal again, quickly shift the gear into a lower gear (these two actions are performed simultaneously). While depressing the accelerator pedal, slightly quickly lift the clutch pedal.

20

0

Share

Why Can't Windshield Washer Fluid Spray in Winter?

Winter windshield washer fluid may fail to spray due to the following reasons: 1. The added washer fluid has insufficient antifreeze capability. 2. The windshield nozzle is clogged. 3. The washer pump is damaged or there is a wiring issue. 4. Leakage in the washer fluid pipeline. 5. Insufficient washer fluid level. Below are the functions of windshield washer fluid: 1. Cleaning performance: Windshield washer fluid is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving cleaning and stain removal. 2. Antifreeze performance: The presence of alcohol and ethylene glycol in the washer fluid can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. 3. Anti-fog performance: The washer fluid forms a single-molecule protective layer on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear view. 4. Anti-static performance: After cleaning with washer fluid, substances adsorbed on the glass surface can eliminate static charges on the glass, providing anti-static properties. 5. Lubrication performance: The washer fluid contains ethylene glycol, which has a high viscosity and can provide lubrication, reducing friction between the wiper and the glass to prevent scratches. 6. Anti-corrosion performance: The washer fluid contains various corrosion inhibitors that have no corrosive effect on any metals, ensuring absolute safety for automotive paint and rubber.

17

0

Share

What to Do When the Volume Knob Malfunctions?

How to Remove Car Film Adhesive?

Differences between Trumpchi GS5 235T and 270T?

What is the car starting procedure?

How to Connect Two 12V Batteries in Series to Make 24V?

How to Shift Gears While Driving?

Why Can't Windshield Washer Fluid Spray in Winter?

How to Check Brake Pads?

Is Buick a Domestic Brand?

What is the clutch lifting method for starting?

How to Install a Car Radar?