What to Do When the Vehicle Management Office Cannot Read OBD?

What are the reasons for frequent DPF regeneration?

DPF regeneration occurs frequently due to the following reasons: 1. Use of poor-quality gasoline: Inferior gasoline contains a large amount of impurities and carbon compounds, which leads to increased particulate matter in the vehicle's exhaust, naturally causing the DPF to clog more easily; 2. Not using low-ash engine oil: Low-ash engine oil contains very few impurities and is more suitable for use in China VI vehicles. If low-ash engine oil is not used, the likelihood of DPF clogging increases; 3. Long-term low-speed driving: Driving at low speeds reduces the combustion efficiency of the vehicle's fuel, resulting in an increase in fine particles in the exhaust pipe.

5

4

Share

What happens if a small amount of water enters the engine intake?

If the air filter is found completely dry upon inspection, it indicates no signs of water entering the intake system. Below is relevant information about engines: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. The first external combustion engine was invented by R. Stirling in the UK (Scotland) in 1816, later improved by Watt into the steam engine. 2. Application Scope: Engines can refer to both power generation devices and entire machines including power units (e.g., gasoline engines, aircraft engines). Types include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.

5

Share

What is the wading depth of the Passat?

The wading depth of the Passat is 350mm. The wading depth of the Passat is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Passat is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water ingress; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration; On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.

20

2

Share

What Causes Engine Shaking When Driving Through Water Without Stalling?

Driving through water without stalling proves that the car's engine did not take in water. The shaking is likely caused by water entering the exhaust pipe, affecting the exhaust. If you're unsure, you can check whether the air filter has taken in water. If the air filter is dry, it indicates no water intake, and you can continue using the vehicle with confidence. If the filter is wet, simply replace it. The correct method for driving through water: 1. Slow down or stop to observe: When encountering standing water while driving, if the water level exceeds two-thirds of the bumper or tire height, there is a certain risk in proceeding. Additionally, driving too fast through water can cause splashes to enter the cabin through the engine compartment or chassis. Assess the water level—if it's high, try to detour and avoid forcing your way through. 2. Do not stop or shift gears: When driving through water, maintain a steady speed in low gear with moderate to high throttle. Drive at a low speed and avoid stopping, shifting gears, or releasing the throttle. 3. Do not restart the engine: If the car stalls in water, take measures to tow it to a safe location with less water as soon as possible. Never restart the engine to avoid damaging it. 4. Remove brake pad moisture promptly: This prevents the vehicle from losing braking ability after driving through water, which could lead to danger or accidents.

14

3

Share

What is the difference between manual-automatic transmission and dual-clutch transmission?

There are three main differences between manual-automatic transmission and dual-clutch transmission: 1. In terms of concept, dual-clutch is both a manual transmission and an automatic transmission, while manual-automatic combines manual and automatic shifting: Dual-clutch transmission belongs to both manual and automatic transmissions, offering the flexibility of manual transmission and the comfort of automatic transmission while providing uninterrupted power output; Manual-automatic transmission integrates manual and automatic shifting functions into the same vehicle. 2. Different structural approaches: Dual-clutch has two sets of transmissions, while manual-automatic combines manual and automatic transmissions: Dual-clutch can be used separately, whereas manual-automatic operates together. 3. Different functions: Dual-clutch ensures smooth starting and seamless shifting, while manual-automatic reduces the impact of manual shifting on the vehicle's drivetrain: Dual-clutch transmission guarantees smooth vehicle starts and seamless gear changes, while manual-automatic transmission minimizes the impact of manual shifting on the drivetrain, thereby extending vehicle lifespan, improving ride comfort, allowing appropriate gear selection based on road conditions to keep the engine operating optimally, and reducing driver fatigue.

3

2

Share

What are the methods for reducing penalty points through legal study?

According to Article 5 of the Notice issued by the Ministry of Public Security on January 14, 2020, regarding the "Work Regulations on Reducing Points for Road Traffic Safety Violations through Accepting Traffic Safety Education (Trial)" (GongJiaoGuan [2020] No. 14): Motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations should participate in corresponding road traffic safety laws, regulations, and related knowledge study, examinations, or traffic safety public welfare activities based on their highest permitted vehicle type and meet relevant requirements to apply for point reduction. The point reduction through legal study is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. After participating in online traffic safety study and passing the examination, their penalty points can be reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific precautions are as follows: Applicable groups: Motor vehicle drivers who hold a driver's license of the People's Republic of China, regardless of the vehicle type permitted by the license or whether they are commercial vehicle drivers, can participate in point reduction through legal study. They should participate in corresponding road traffic safety laws, regulations, and related knowledge study and examinations based on their highest permitted vehicle type. Specific rules: Motor vehicle drivers participating in online study of road traffic laws, regulations, and related content must study continuously for 5 minutes each time. The total study time must accumulate to 30 minutes within 3 days. They can then register for an examination within 7 days. Passing the examination will reduce 1 point. Drivers can also attend on-site study, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an examination. Passing the examination will reduce 2 points. Cases not accepted: The following situations will not be accepted: If the driver had more than two full-point records in the previous scoring cycle. If the driver was involved in hit-and-run accidents, drunk driving, or used forged or altered documents or license plates within a 3-point cycle. If the driver's license is in the probation period or has not been reviewed on time. If the driver has unprocessed traffic violation records under their name. If the driver has a motor vehicle under their name with an expired safety technical inspection or not deregistered as required. If the driver has already reduced the maximum of 6 points in the current cycle.

15

4

Share

What to Do When the Vehicle Management Office Cannot Read OBD?

What are the reasons for frequent DPF regeneration?

What happens if a small amount of water enters the engine intake?

What is the wading depth of the Passat?

What Causes Engine Shaking When Driving Through Water Without Stalling?

What is the difference between manual-automatic transmission and dual-clutch transmission?

What are the methods for reducing penalty points through legal study?

Should You Shift to Neutral or Keep the Brake Pedal Pressed at a Red Light?

Is Full Door Repainting Necessary for Touch-ups?

Is the driving position on the right side in Hong Kong?

Can I continue taking the test after failing the second subject three times?