What to Do When the USB Port of Trumpchi GS8 Is Not Responding?

Differences Between the Facelifted and Non-Facelifted BMW 5 Series

Here are the differences between the facelifted and non-facelifted BMW 5 Series: 1. Difference one: Configuration. The facelifted 5 Series cancels LED fog lights across the entire lineup but comes standard with tire pressure monitoring. 2. Difference two: Exterior design. The domestic 530Li Exclusive Luxury trim adopts a new multi-spoke silver 18-inch wheel design. The imported 530i/540i M Sport trim and the three domestic 530Li M Sport trims uniformly switch to a new 19-inch multi-spoke wheel design, offering outstanding texture and sporty appeal.

15

3

Share

How to Use Air Conditioning to Defog Windows on Rainy Days?

When the humidity inside the car is high, the windows are prone to fogging up. Turning on the A/C switch can effectively defog the windshield by dehumidifying the air from the vents. Do not use the defogging mode while the air conditioning is cooling. The temperature difference between the outside air and the windshield can cause the windshield surface to fog up. Turning on the air recirculation mode helps quickly lower the temperature inside the car and prevents outside air and odors from entering the vehicle. Using the recirculation mode for an extended period can cause the windows to fog up. If this occurs, switch to the defogging mode.

10

4

Share

How to Check the Vehicle's Production Date?

Vehicle production date can be checked in the following ways: 1. Below the co-pilot side pillar. Open the door to see it below the co-pilot side pillar. 2. The upper right corner of the certificate of conformity. The production date marked on the certificate of conformity that comes with the new car can be precise to the year, month, and day, which is more detailed. 3. The factory paper nameplate on the front windshield of the driver's seat. This nameplate only shows the year and month, and it includes the vehicle's chassis number. Every car has its own chassis number when it leaves the factory. The chassis numbers of cars of the same brand and model are completely different. The tenth letter or number of the chassis number indicates the car's production date.

11

2

Share

What are the correct steps for starting on a slope in Subject 2?

When parking on a steep slope, follow these steps in order: press the clutch, press the brake, shift to neutral, pull the handbrake, and then release the clutch. Note that the right foot should still be pressing the brake at this point. Move the right foot from the brake to the accelerator, gently press the accelerator to raise the engine speed to around 2000 RPM, and maintain steady pressure on the accelerator. Slowly lift the clutch to find the engagement point. You can determine if the engagement point is reached by listening to the engine sound—the engine speed will slightly decrease when the engagement point is reached. At this point, release the handbrake, and the car will start moving. Gradually release the clutch completely. After the car starts moving, maintain steady pressure on the accelerator and slowly release the clutch fully. At this point, the starting process is complete.

19

0

Share

What does zone mean on a car?

The zone on a car refers to the air conditioning temperature zoning control, which allows setting different temperatures in different areas of the car to meet various needs. This means the left and right sides of the car's air conditioning can be set to different temperatures and airflow levels. Below is an introduction to air conditioning temperature zoning: 1. Function of air conditioning temperature zoning control. It provides a more comfortable environment for drivers and passengers, designed for passengers with different temperature needs, allowing setting different air conditioning temperatures and airflow levels in different areas of the car. Temperature zoning control is divided into dual-zone and multi-zone. Dual-zone refers to temperature control on the driver and front passenger sides, while multi-zone adds temperature control for rear passengers. 2. Working principle of air conditioning temperature zoning control. It involves adding more air vents to divide the air ducts into finer and more sections, which are then directed to different zones through several mixing vents, with each zone controlled by multiple independent controllers.

10

0

Share

Can a temporary ID be used for Subject 1 test?

A temporary ID can be used for the Subject 1 test, as it holds the same validity as a regular ID. The admission ticket and other required documents are handled by the driving school, which will distribute them during the test. Electronic IDs are not accepted for the exam. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test can be taken twice. If the first attempt is unsuccessful, a second free retake is allowed. If the second attempt also fails, the Subject 1 test is terminated, and you can only reschedule the test after ten days. The test is computer-based and lasts 45 minutes. The content of the Subject 1 test includes: regulations on driving licenses and motor vehicle management; road traffic conditions and rules; traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for the Subject 1 test: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the exam room. At the identity verification station, you will be assigned a seat. Once seated, begin the test, ensuring the camera is aligned with you and following exam discipline. If you fail the first attempt, a same-day retake is available. If you fail again, you must pay to reschedule. After the test, queue to collect your score sheet and sign it—unsigned sheets are invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, with one retake allowed if unsuccessful. If you skip the retake or fail it, the test is terminated, and you must reschedule. For Subjects 2 and 3, there are only five attempts. Subjects 2 and 3 can be rescheduled after ten days. If you fail the Subject 3 safety and civilized driving knowledge test, the passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers laws, regulations, and knowledge related to road traffic safety. Subject 2 is the field driving skills test. Subject 3 includes two parts: road driving skills and safety and civilized driving knowledge. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4, though this term is not officially recognized in the regulations (i.e., the Ministry of Public Security Order No. 123). The test duration is 45 minutes.

4

3

Share

What to Do When the USB Port of Trumpchi GS8 Is Not Responding?

Differences Between the Facelifted and Non-Facelifted BMW 5 Series

How to Use Air Conditioning to Defog Windows on Rainy Days?

How to Check the Vehicle's Production Date?

What are the correct steps for starting on a slope in Subject 2?

What does zone mean on a car?

Can a temporary ID be used for Subject 1 test?

How to Call for Fuel Delivery When a Motorcycle Runs Out of Gas?

How to Check Vehicle Ownership Statistics?

How to activate the adaptive headlights on Audi Q7?

How to Set Up a Hill Start Practice Area