···
Log in / Register

What to Do When the Car Body Shakes During Acceleration?

6Answers
VonHope
07/28/2025, 11:44:14 PM

If there is an increased noise during the moment of acceleration, it may be due to a loose universal joint on the half-shaft, and timely inspection and repair at an auto repair shop is necessary. Additionally, carbon buildup on the throttle body and fuel injectors can also cause shaking during acceleration, so regular cleaning is required. Solutions for shaking during acceleration are as follows: 1. Replace the filter elements, including the oil filter, fuel filter, and air filter. Replacing clogged filter elements can improve filtration efficiency, enhance fuel quality, reduce impurities, and ensure more complete combustion in the engine. 2. Clean carbon deposits, including those on the spark plugs, throttle body, and cylinders. Common methods include using carbon cleaner, dry ice cleaning, and fuel system additives. 3. Clean the fuel injectors. The fuel injectors can be removed for cleaning, and after cleaning, they can be tested to check if the atomization effect meets the standard (fuel injection volume per unit time).

Was this review help?
114
Share
MacEliana
08/12/2025, 10:54:43 AM

Body vibration during acceleration can indeed be quite annoying. Having driven for many years, I've encountered this issue several times. The most common causes are unbalanced tires or deformed wheel rims, which can usually be resolved by getting a dynamic balance at a repair shop. Sometimes, low tire pressure or uneven tire wear can also cause vibration – simply adding air or replacing the tires should fix it. Another possibility is a faulty engine ignition system, such as aging spark plugs causing rough acceleration; inspecting and replacing the spark plugs typically solves the problem. If the vibration is more noticeable at high speeds, it might be due to worn drive shafts or CV joints, requiring professional inspection. Regular maintenance, including checking tires and engine systems every six months, can effectively prevent such issues. Never ignore this problem as it may affect driving safety and increase the risk of losing control at high speeds.

Was this review help?
17
Share
Expand All
VonAndrew
10/02/2025, 03:20:49 AM

As an ordinary car owner, the shaking during acceleration initially made me quite nervous. After consulting a mechanic friend, I learned it could be a simple issue, such as needing a tire balance, which can be fixed at a repair shop for a small cost. Another common cause is excessive carbon buildup in the engine, leading to poor fuel delivery; cleaning the throttle body and fuel injectors should resolve this. If the suspension system is loose or the shock absorbers are failing, it can also cause vibrations during acceleration, especially after hitting potholes. It's recommended to first check if the tire pressure is appropriate and whether there are any foreign objects stuck in the wheels. Pay attention to road conditions during daily driving and reduce sudden acceleration to prolong component lifespan. Address any issues promptly to prevent minor problems from turning into major repairs. Remember, safety comes first—stop the car safely if necessary before inspecting.

Was this review help?
6
Share
Expand All
KimberlyFitz
11/15/2025, 09:14:20 PM

When my car shakes during acceleration, I check the tires. A friend said it could be due to incorrect wheel balancing, and getting it balanced for a few dozen bucks might solve the issue. Alternatively, it might be the engine's spark plugs failing, so trying new ones could help. If it shakes at high speeds, it might be a driveshaft problem, and a mechanic should be consulted. Better maintenance leads to fewer issues.

Was this review help?
5
Share
Expand All
VonCharlie
01/05/2026, 10:52:49 PM

As a DIY-savvy car owner, when experiencing acceleration shudder, I first check tire wear, which may indicate imbalance or insufficient tire pressure; simply measure and inflate the tires myself. If the issue lies with the engine, such as carbon buildup or faulty ignition coils, cleaning the engine or replacing parts can solve it for a few hundred bucks. Don't forget to inspect the condition of the driveshaft in the transmission system—repairs are needed if damaged. A cost-saving approach is regular self-inspections for prevention; it's recommended to check key components every three months. Safety reminder: Stop and repair immediately if the shudder worsens.

Was this review help?
6
Share
Expand All
BradleyLynn
04/02/2026, 10:24:55 PM

I'm most afraid of acceleration vibrations while driving, as it affects safety. Common causes include unbalanced tires or engine issues, which can be addressed by performing a wheel balance or replacing spark plugs. If vibrations occur at high speeds, pay attention to potential damage to transmission components. Stop the car safely to inspect and avoid risks. Regular maintenance, such as a check-up every 5,000 kilometers, can reduce malfunctions. Don't delay; timely repairs ensure safety.

Was this review help?
17
Share
Expand All
More Q&A

What colors are available for the GAC Honda Vezel?

GAC Honda Vezel offers a variety of colors including Taffeta White, Rose Black, Glacier Silver, Tango Red, Offt Black, Satin Silver, and Ocean Blue. As part of the car's styling design, the color is directly influenced by the designer and the vehicle's shape. The right color can better highlight the design of the car and showcase its characteristics. Here is some information about the GAC Honda Vezel: 1. The Vezel is GAC Honda's first SUV, developed on Honda's new vehicle platform and officially launched on October 25, 2014. 2. Exterior: The Vezel features a winged front grille design with a mysterious and elegant black tone, integrating the grille and headlights. The LED headlights with dual-lamp design are combined with curved LED daytime running lights. 3. The Vezel 1.8L model is equipped with a high-efficiency 1.8L i-VTEC engine, combining strong performance at medium-high loads with excellent fuel economy at low loads through technologies like lightweight, low friction, and low fuel consumption, paired with a new-generation CVT transmission, achieving a minimum combined fuel consumption of 6.5L/100km. The Vezel 1.5L model is powered by Honda's new Earth Dreams Technology powertrain system. The 1.5L direct-injection DOHC i-VTEC engine in the Vezel 1.5L model delivers a maximum power of 96kW and a peak torque of 155N·m.
115
Share

Does Turning on the Heater While Idling Consume More Fuel?

Turning on the heater immediately after starting the car without warming it up consumes more fuel. However, after the car has warmed up, the additional fuel consumption from using the heater is minimal and can be practically ignored. Here are some precautions for using the car heater: 1. Do not press the A/C button. Pressing the A/C button activates the compressor, which is essentially turning on the air conditioning. The heater does not require this because it utilizes the heat already generated by the engine and transferred through the radiator to warm the cabin. Using the air conditioning simultaneously would offset some of the engine's power, leading to increased fuel consumption. 2. Wait until the car has warmed up before turning on the heater. When the car is first started, engine oil needs time to circulate from the oil pan to lubricate all components. Turning on the heater during this period increases the engine load, similar to a sprinter carrying extra weight at the start of a race, which inevitably consumes more fuel. This extra fuel consumption is due to increased friction caused by insufficient lubrication inside the engine. The correct approach is to wait 3-5 minutes after starting the car, allowing the coolant temperature to rise before turning on the heater. Initially, set the air circulation to external to quickly expel the cold air inside the car, then switch to internal circulation after a short while.
117
Share

What Causes the ABS Light to Flicker On and Off?

There are multiple states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect wheel speed signals. This prevents the ABS control module from determining vehicle speed or wheel slip rate, thus disabling its ability to regulate braking. Solution: Clean contaminants from the wheel speed sensor and adjust the gap between the sensor and tone ring to restore normal function. Cause 2: Loose wiring connections or poor contact in ABS relays causing signal disruption. Solution: Inspect all wiring connections and secure any loose terminals. State 2: ABS warning light intermittently illuminates but extinguishes during acceleration. Cause: When multiple electrical accessories are in use, battery voltage drops below 10.5V. The light extinguishes as engine RPM increases voltage. Possible low voltage supply to ABS system due to poor connections or grounding issues. Solution: Check battery specific gravity; inspect charging system; examine power supply components (voltage relay or poor power connections). State 3: ABS warning light stays illuminated after engine start until engine is turned off. Cause: Poor grounding of ABS hydraulic valve body; faulty wiring connections at valve body; ABS control module malfunction. Solution: Loosen and retighten valve body ground screws, cleaning contact surfaces if necessary; inspect connector gaps; replace ABS or ABS/ASR control module. State 4: ABS warning light activates during high-speed driving. Cause: Significant discrepancy between front and rear wheel speed signals detected by ABS module; incorrect tire or wheel specifications. Solution: Verify proper tire and wheel specifications as indicated on fuel door placard. State 5: Intermittent ABS warning light activation. Cause: Improper brake light switch adjustment; internal switch contact issues. Solution: With engine running, depress brake pedal while manually pushing switch rod downward to reset position; replace brake light switch if needed. When the ABS warning light is illuminated, continued driving is not recommended. ABS malfunction means loss of anti-lock braking capability during emergency stops, potentially causing wheel lock-up, loss of vehicle control, and compromised ability to decelerate or steer - presenting significant safety risks.
120
Share

Can a 200cc Single-Cylinder Motorcycle Be Used for Long-Distance Travel?

It can be used for long-distance travel. Specific details: Generally, it's advisable to stop for half an hour after every thirty to forty kilometers, and try to maintain a speed of sixty miles per hour. About 200cc Motorcycles: 200cc refers to the cylinder displacement, where 'cc' stands for milliliters. Typically, the greater the power, the larger the displacement. Motorcycle displacement is measured in milliliters (CC or ml), while car displacement is measured in liters (L). A 200 model motorcycle means 200CC or 200ml, equivalent to 0.2L in cars. For example, compared to a car with a 2.0-liter displacement, this motorcycle's displacement is one-tenth of that. The cylinder relies on the sudden expansion of air to push the piston, and displacement is a corresponding technical indicator. A certain displacement is necessary to achieve a certain level of power.
110
Share

What does a 1.5L displacement car mean?

1.5L displacement refers to the volume of fluid that the car's cylinders intake or exhaust per stroke or cycle, which is 1.5 liters. Generally, the larger the engine displacement, the higher the power output. A bigger displacement means the engine releases more energy per unit time, resulting in greater power. The difference between 1.5T and 1.5L: The 1.5L engine's displacement is the total working volume of all cylinders, calculated by multiplying the swept volume of the piston from top dead center to bottom dead center by the number of cylinders. The 'T' in 1.5T stands for turbocharging, indicating a 1.5L engine equipped with a turbocharger, which is essentially a 1.5L engine enhanced with a turbo. Examples of 1.5L displacement cars: 1.5L cars include: the Honda Fit, a five-seat hatchback from GAC Honda; the Haval H6, a compact SUV under the Haval brand; the Buick Regal, a B-segment family car from Buick; the Changan CS75-PLUS, a family-oriented SUV; and the Volkswagen Bora, an A-segment commuter car.
101
Share

Is 1500 RPM at Cold Start Normal?

Cold start at 1500 RPM is normal. The cold start idle speed of 1500 RPM is controlled by the electromechanical system to increase fuel injection, allowing the engine lubrication and cooling systems to quickly reach the temperature suitable for high-speed driving. All vehicles should wait until the RPM drops to 700-800 before driving at high speeds after a cold start. Different car models have different cold start RPM values due to variations in engines. The cold start RPM for engines ranges from 1000 to 1400 RPM. Generally, the idle speed is between 500 and 850 RPM, while the instantaneous idle speed during a cold start ranges from 1500 to 2000 RPM per minute. Once the engine coolant temperature returns to 90 degrees, the idle speed will stabilize within the specified range. After a cold start, there is a high idle speed process, which is particularly noticeable in winter. This phenomenon is controlled by the vehicle's onboard computer (in vehicles with electronic throttle control systems). Once the engine reaches a certain temperature, the idle speed will normalize. This helps accelerate the engine temperature to normal operating conditions during a cold start. During a cold start, the engine may produce slight abnormal noises. If these noises disappear after a few minutes of warm-up, it does not affect the vehicle's operation. Since the engine oil in all components has drained back to the oil pan after the vehicle has been parked overnight, it is recommended to warm up the engine for a few minutes in the morning before driving.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.