···
Log in / Register

What to Do When Car Windows Are Covered with Water on Rainy Days?

6Answers
Ronald
09/08/2025, 12:37:43 AM

Spray a small amount of defogging agent on the car window and wipe it clean to remove dirt and stains from the glass. Use the air conditioning's cooling and dehumidifying function to reduce air humidity and eliminate fog. Use the method of reducing the temperature difference to remove condensation. Direct warm air onto the windshield to quickly raise its temperature and reduce the temperature difference.

Was this review help?
118
Share
ONathan
09/19/2025, 11:20:51 PM

On rainy days when the car windows are covered with water, I usually start by turning on the defogging function of the air conditioner. This button typically has a fan icon, directing cool air to the front windshield. It's best to lower the temperature as it quickly absorbs moisture inside the car to prevent fogging. Remember to switch to the external circulation mode to expel the humid air. If the rearview mirror is blurry, you can also use the rear windshield heating wire function by pressing a button to solve the problem. Additionally, don't forget to keep the wipers on, especially during heavy rain, maintaining a moderate frequency to avoid rapid wear. I also keep a defogging spray in the car for daily use to prevent moisture. The key is to immediately slow down and pull over to a safe spot if visibility becomes unclear on the road, ensuring no accidents occur due to fogging. Regular car maintenance, such as frequently changing the air filter, can also help prevent this issue.

Was this review help?
17
Share
Expand All
Norah
11/02/2025, 10:42:11 PM

To deal with the issue of rain blurring the windshield, I usually turn on the car's air conditioning system immediately, setting it to dehumidify mode and directing cold air towards the windshield. This quickly dries up the fog and restores clear visibility. If the effect is slow, I adjust the fan speed to a higher setting or use some defogging spray as a temporary solution. When driving in the rain, I also turn on the wipers and set them to automatic mode to match the intensity of the rain. I always keep a glass cleaning cloth in the trunk to wipe away any remaining water droplets. It's also a good time to check if the wiper blades have aged or hardened and need replacement, as they won't clean effectively otherwise. For such situations, it's wise to prepare some practical tools in advance, like portable dehumidifier packs in the car.

Was this review help?
4
Share
Expand All
DeCamille
12/16/2025, 10:42:12 PM

When rainwater blurs the windows, I immediately turn on the air conditioning defogging function, increase the fan speed, and direct the airflow to concentrate on the glass for cooling and dehumidification. If the fog is heavy, quickly switch to the internal circulation to reduce the entry of external moisture. Regularly clean the glass with professional defogging spray, then wipe it with a cloth to maintain a hydrophobic surface effect. Check the wiper system to ensure the blades are in good condition; otherwise, replace them with new ones.

Was this review help?
18
Share
Expand All
SanNicole
02/05/2026, 11:32:45 PM

On rainy days when the windshield gets blurry, my first instinct is to hit the AC defrost button for a strong blast to dehumidify the glass while activating wipers to clear water buildup and maintain visibility. In emergencies, pull over safely to handle the situation—never push through. Switch cabin air to external circulation to draw out moisture and prevent fogging at the source. Remember: replace aged wiper blades promptly for optimal sweeping performance. Routine cleaning of interior window surfaces to remove oily residues also minimizes water adhesion. Cultivate safe habits—drive extra cautiously in rain, reduce speed, and allow ample reaction time to mitigate risks.

Was this review help?
5
Share
Expand All
McDeclan
05/01/2026, 03:20:36 PM

When dealing with rain-covered glass, my approach is to first activate the air conditioning's defogging function, using cold air to quickly clear the fog on the windshield, while simultaneously using the wipers to promptly remove external water droplets to maintain visibility. Switching between internal and external air circulation effectively prevents moisture intrusion, especially during the rainy season when extra attention is needed. Regularly check the ventilation system's filter to ensure it's not clogged; replace it if necessary to keep the air inside dry. During long drives, keep a dry cloth handy to wipe the mirrors and prevent water buildup that can blur vision. Maintain the wiper blades regularly and replace them once they harden to ensure efficient operation. Never underestimate such issues; parking the car in a dry place can also reduce humidity accumulation, ensuring safe driving.

Was this review help?
3
Share
Expand All
More Q&A

Do I still need to buy a phone holder if I have CarPlay?

You don't need to buy a phone holder if you have CarPlay. Your phone can be mirrored to the car's display. Introduction to CarPlay: CarPlay is an in-car system released by Apple Inc. in the US, which seamlessly integrates users' iOS devices and iOS user experience with the dashboard system. Interfaces supported by CarPlay: CarPlay only supports iPhones with Lightning connectors. Although iPads also support this interface, Apple has not included iPads as hardware devices supported by CarPlay. On June 13, 2016, Apple announced at the WWDC developer conference that its smart car system CarPlay would be updated along with iOS 10, becoming the perfect partner for the new version of Apple Maps and Siri.
109
Share

What engine is equipped in the Shuailing e?

The Shuailing e is equipped with the 4DA1 series engine. Principle of turbocharging: A turbocharged engine relies on a turbocharger to increase the engine's air intake. The turbocharger is essentially an air compressor. It uses the exhaust gases from the engine as power to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses fresh air delivered through the air filter pipe and sends it into the cylinder. As the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, thereby enhancing the air compression level. This correspondingly increases the engine's air intake and output power. Function of turbocharging: The main function of turbocharging is to increase the engine's air intake, thereby improving the engine's power and torque, making the vehicle more powerful.
102
Share

What Engine Displacement is Needed for a Motorcycle Wheelie?

There is no specific requirement for engine displacement when performing a motorcycle wheelie. Here are the details: 1. Below 600cc: For motorcycles under 600cc, performing a wheelie requires popping the clutch while stationary. For 600cc sport bikes, the front wheel will lift off the ground by itself when giving full throttle in first or second gear while the bike is moving. 2. 1000cc+: For motorcycles with 1000cc or more, the front wheel will lift off the ground when giving full throttle in third or fourth gear. Below is additional information on motorcycle wheelie techniques: 1. Method one: Lift the front wheel after the bike starts moving, practice while stationary. First, keep both feet on the ground, engage first gear, rev the throttle with the right hand while popping the clutch with the left hand, and simultaneously pull the handlebars upward with both hands. At this point, push off the ground with both feet, adopting a posture that lifts the bike upward, and the front wheel will easily leave the ground. 2. Method two: After starting the bike, while moving slowly, pull the clutch, rev the throttle, and quickly release the clutch to utilize the strong torque of first or second gear to lift the front wheel.
103
Share

What is the fuel tank capacity of the Changan CS55 in liters?

The fuel tank capacity of the Changan CS55 2019 1.5T Manual Xuanse Type China VI is 58L. It is equipped with a 1.5L turbocharged engine and a 6-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. In the same vehicle class, the fuel tank capacity of the Fengxing T5 2022 Shengshi 1.6L Manual Zhumeng Edition (5-seater) is 45L, and the fuel tank capacity of the Trumpchi GS4 2022 270T Manual Comfort Edition is 55L. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the nominal capacity. To check the remaining fuel level, the driver can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle is near 'E', it indicates low fuel, and when it is near 'F', it indicates a full tank.
118
Share

What is the displacement for a 50kw engine?

50kw is the power of the engine, equivalent to 68 horsepower. It is not related to displacement. Definition of displacement: Displacement (Swept-volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or exhausted per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy of fuel into mechanical energy) per unit time, which translates to better "power performance". Common vehicle displacements: Most sedans have displacements of 1.4T, 1.6L, 1.8T, 2.0L, 2.4T, etc. Most mid-size SUVs start with at least a 2.0T engine or a naturally aspirated engine above 2.4L.
119
Share

Should You Shift to Neutral or Keep Your Foot on the Brake at a Red Light?

When waiting at a red light, if the duration is relatively long, the better practice is to shift the car's gear to Neutral (N) and then engage the handbrake. Although this method is slightly more cumbersome, it significantly improves safety compared to keeping the car in a low gear. If the red light is about to turn green in just a few seconds, you can simply keep your foot on the brake while remaining in Drive (D) gear. Below is an introduction to automatic transmissions and braking: Impact of Prolonged Braking: Prolonged braking generates heat due to friction between the brake pads and brake discs. If this heat accumulates and is not dissipated in time, excessive heat can lead to a reduction in braking efficiency, affecting driving safety. Therefore, it's important to be mindful of braking duration and to regularly inspect and replace brake components. Introduction to Automatic Transmissions: An automatic transmission, as the name suggests, eliminates the need for the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission car has six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). For general driving needs, using just P (Park), R (Reverse), N (Neutral), and D (Drive) gears is sufficient. However, specific driving conditions may require the use of other functional gears.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.