What to Do When Car Window Glass Cannot Be Raised or Lowered?

1 Answers
VanEden
07/23/25 9:50pm
Solutions for difficult car window glass operation: 1. When the window is hard to move, lower it completely and spray dashboard wax into the rubber seals on both sides of the glass. 2. After raising and lowering the window several times, if it still sticks or moves unevenly, lower the window completely again and spray more dashboard wax into the rubber seals. Repeat this process until the window moves smoothly without sticking, uneven movement, or noise. Use a car towel to wipe off any excess dashboard wax from the edges of the rubber seals. This method can also prevent aging of the rubber seals and avoid window operation issues caused by rubber deterioration. If this method doesn't work, you'll need to visit a repair shop.
Was this review help?
4
4
Share
More Forum Discussions

What does PICC new car insurance endorsement mean?

PICC new car insurance endorsement refers to the policyholder making amendments to their newly purchased car insurance policy contract due to various reasons. Below is relevant information about vehicle insurance: 1. Overview: Vehicle insurance, also known as motor vehicle insurance or auto insurance, refers to a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Auto insurance is a category of property insurance, and within the field of property insurance, it is a relatively young type of coverage, as it emerged and developed alongside the advent and popularization of automobiles. Unlike modern motor vehicle insurance, early auto insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body. 2. Claims: (1) Carry clear copies of the vehicle's "Three Certificates and One Policy" (insurance policy), the owner's ID card, driver's license, vehicle registration certificate, and the main insurance policy. It is important to note that many insurance companies no longer accept insurance cards as proof for claims. (2) Reporting an accident promptly is crucial, especially for major incidents. When calling the insurance company's claim hotline, you will need to provide basic information such as the policy number, time and location of the incident, and the nature of the accident.
13
2
Share

Where is the Audi anti-theft screw located?

Audi's anti-theft screws are located on the tires. The anti-theft screws on cars, also known as anti-removal screws, have a wide range of applications, such as in power facilities, railway facilities, highway facilities, oilfield facilities, urban street lighting facilities, car tires, and public fitness equipment. Due to their superior performance, anti-theft screws have garnered widespread attention across various industries. Here is some additional information: 1. Structure of anti-theft screws: The structure of anti-theft screws on tires is very complex. During production and processing, the outer shape of the anti-theft screw is made irregular, primarily to prevent tire theft. When removing the tire, a matching removal tool is required to take the wheel off. 2. Features of anti-theft screws: Anti-theft screws have a relatively simple yet novel structure, which makes the tires more secure and helps prevent theft. They operate on the principle of reverse locking, providing unique and reliable anti-theft performance. They are relatively easy to remove, provided that a specialized wrench is used, without requiring overly complex tools. These screws also help protect the interests of businesses, which use them on their products. 3. Types of anti-theft screws: These include internal pentagon anti-theft screws, internal hexalobular (Torx) anti-theft screws, Y-type anti-theft screws, external triangle anti-theft screws, internal triangle anti-theft screws, two-point anti-theft screws, and eccentric hole anti-theft screws, among others.
14
4
Share

Where is the BMW car door lock located?

The unlock button for BMW car doors is located on the vehicle's center console panel, positioned between the two air conditioning vents. Pressing this button allows you to lock or unlock the doors, which is very convenient. Generally, the door locks of cars available in the market are placed on the driver's side door, the center console panel, the vehicle's ceiling, or near the gear shift lever. The exact location may vary depending on the car model. Relevant information about car doors is as follows: 1. Introduction: The car door (car-door) provides access for the driver and passengers to enter and exit the vehicle, isolates external disturbances, and to some extent mitigates side impacts to protect the occupants. The aesthetics of the car are also related to the design of the doors. 2. Criteria for good car doors: The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators. Anti-collision performance is particularly important because, in the event of a side collision, the buffer distance is very short, making it easy for passengers inside the car to be injured.
4
1
Share

What does the yellow exclamation mark in Lexus mean?

There are four possible scenarios when a yellow exclamation mark appears on the car dashboard: general malfunction, automatic transmission failure, abnormal tire pressure, and lighting system fault. Below is a detailed analysis of these four situations: General Malfunction: A triangle with an exclamation mark inside indicates a general performance or component malfunction in the vehicle. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor malfunction. It is recommended to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission fault or low transmission fluid level. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark under a horizontal line inside parentheses represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting System Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a brake system warning, typically due to brake system failure or low brake fluid level. Immediate inspection of the brake system is necessary to prevent accidents.
1
4
Share

What are the effects of severe carbon buildup in the intake manifold?

Severe carbon buildup in the intake manifold can lead to poor engine intake, resulting in engine power loss and idle vibration. 1. Effects: At the same time, the air-fuel mixture becomes too rich, causing noticeable power reduction and accompanied by a certain degree of increased fuel consumption. The increased fuel consumption occurs because to achieve the same power as before carbon buildup, it's necessary to increase the throttle opening angle and provide additional fuel supply. 2. Source of carbon buildup: The carbon deposits in the intake manifold mainly come from oil vapor separated by the crankcase oil separator. When severe carbon buildup occurs in the intake manifold, it affects the normal intake airflow of the engine, and in severe cases, may even obstruct normal engine intake. Additionally, if carbon deposits break off with the airflow and enter the engine interior, they may cause damage to the engine.
2
4
Share

What is the reason why the rearview mirror of Mercedes-Benz e300l suddenly cannot be folded?

The reasons why it cannot be automatically folded: whether the rearview mirror is stuck by debris such as sand, and the debris needs to be cleaned; whether the rearview mirror is out of power, and the battery needs to be replaced; whether the motor of the rearview mirror is damaged, and a new one needs to be replaced if it is broken. The following are related introductions: 1. Function: The rearview mirror can increase the passing space when the vehicle meets another car in a narrow section of the road, and it can also protect the rearview mirror from damage. 2. Other reasons: If you feel the vibration of the motor working but the rearview mirror does not move, it proves that the gear mechanism for opening and closing is damaged. If you do not feel the vibration of the motor working and there is still no vibration after patting it a few times, it means that the motor is faulty or there is a problem with the circuit. Circuit problems are generally caused by switch damage or fuse burnout.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.