What to Do When BMW Run-Flat Tire Pressure is Low?

What is the minimum ground clearance of the Ford Kuga?

The minimum ground clearance of the Ford Kuga is 210mm. Below are the specific details of the Ford Kuga: 1. The body dimensions of the Ford Kuga are 4524mm in length, 1838mm in width, and 1701mm in height, with a wheelbase of 2690mm. The Ford Kuga is an SUV under the Ford brand. 2. In terms of power, the Ford Kuga offers two engine options: the Ecoboost180 (1.5T) and the Ecoboost245 (2.0T), with maximum power outputs of 181 horsepower and 245 horsepower respectively, paired with a 6-speed automatic transmission. Extended information: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary, used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision.

9

0

Share

Can you directly add more engine oil when it's insufficient?

Generally, you can directly add more engine oil when it's insufficient. However, the added oil must be of the same brand and type, and mixing different oils is not allowed. Additionally, opened engine oil can be used for topping up if it's within one year, but oil older than one year is basically ineffective and not recommended for use. Below is relevant information about engine oil selection: 1. Choose engine oil based on the engine's requirements. There's no need to use high-grade oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. 2. It's advisable to choose multi-grade oil whenever possible. Multi-grade oil offers advantages such as cost savings, long service life, and high efficiency, providing better protection for the engine. Due to the characteristics of multi-grade oil, you may observe phenomena like premature darkening or lower oil pressure compared to regular oil during use, both of which are normal.

17

4

Share

How often should the brake pads of the Everest be replaced?

The brake pads of the Everest should be replaced every 30,000 to 50,000 kilometers. When the vehicle has been driven over 30,000 kilometers, it is essential to regularly inspect the brake pads to check their actual thickness and ensure immediate replacement once they reach their wear limit. Below is more information about brake pads: 1. Brake pads are one of the critical components of a vehicle's braking system. The pressure from the braking system is transmitted through the piston caliper to the brake pads, and the friction between the brake pads and the brake disc generates the braking force that slows down or stops the vehicle. 2. Brake pads consist of three parts: a steel plate, adhesive material, and friction material. The effective part of the brake pad is the friction material layer. Once this layer is worn out, the braking performance of the pad declines, so the brake pads must be replaced when they wear down to the adhesive layer.

8

2

Share

Is Automotive Urea Harmful to the Human Body?

Automotive urea is composed of 32.5% high-purity urea and 67.5% deionized water. Since the human body naturally produces urea, contact with the skin generally does not cause any harm. However, under high temperatures, automotive urea can easily release ammonia gas, which has corrosive properties. Prolonged skin exposure to ammonia may lead to pigmentation or ulcers. Below are the detailed explanations: 1. Under normal circumstances, automotive urea is harmless to the human body (if it comes into contact with the skin, simply rinse with plenty of soapy water or clean water, but avoid contact with eyes or ingestion). However, under high-temperature conditions, automotive urea may release ammonia gas (NH3); 2. NH3 can have corrosive and irritating effects on human skin tissue. Prolonged exposure to ammonia gas may result in symptoms such as skin pigmentation or ulcers. (If such symptoms occur, seek medical attention immediately to prevent more severe consequences).

16

2

Share

Is Installing a Rear Wing on a Car Illegal?

Adding a rear wing to a car is considered illegal modification and is a violation of the law. The penalties and relevant regulations for illegal modifications are as follows: Penalties for illegal modifications: Driving a car with illegal modifications on the road, the public security traffic management department will detain the vehicle, confiscate the illegal devices, order restoration to the original condition, and impose fines according to the law. Relevant regulations: For cars with illegal modifications, the public security traffic management department will not issue a safety technical inspection qualification mark. If it constitutes a public security management violation, the public security organ will impose penalties such as fines or detention in accordance with the relevant provisions of the "Public Security Administration Punishment Law." When modifying your car, be sure to apply for a change registration with the traffic management department of the public security organ to ensure that the car can pass annual inspections and routine safety checks after modification.

1

0

Share

How to adjust the low beam headlights on the Lamando?

The control switch for the Lamando's low beam headlights is located on the left lever below the steering wheel. Simply pull the lever toward the driver to activate them. When the low beams are on, you can switch between low and high beams by pushing the turn signal lever forward or backward. The low beam headlights have a range of approximately 30-40 meters. More details are as follows: 1. Experiments show that when driving at 55 km/h at night, the braking distance upon spotting an obstacle is exactly 30 meters. This means that if you stop immediately upon seeing something within the low beam's range, there will be no gap between the car and the object. This assumes good vehicle condition, road conditions, and driver reaction time. If the speed is higher, or if the vehicle or road conditions are poor, or the driver is fatigued with slower reactions, the outcome can be imagined. 2. Therefore, it's crucial to control your speed when driving at night. On flat, wide roads with good visibility, you can use high beams and drive slightly faster. However, when encountering oncoming traffic, uneven roads, turns, bridges, narrow roads, or intersections, you should slow down, generally keeping the speed below 40 km/h.

3

1

Share

What to Do When BMW Run-Flat Tire Pressure is Low?

What is the minimum ground clearance of the Ford Kuga?

Can you directly add more engine oil when it's insufficient?

How often should the brake pads of the Everest be replaced?

Is Automotive Urea Harmful to the Human Body?

Is Installing a Rear Wing on a Car Illegal?

How to adjust the low beam headlights on the Lamando?

Should the Pajero use 92 or 95 octane gasoline?

What is the tire model of the Golf?

How to Remove the Taillight of a Sagitar?

Under what circumstances is the L gear used?