What is the method to reset the maintenance light on the CS75?

[MacEmerson]

CS75 maintenance light reset specific operation steps are as follows: First, turn the car key to the ON position (turn the key twice, or press the start button twice for keyless start), then press the selection button on the left side of the steering wheel. Next, press and hold the reset button for about 5 seconds (keep holding the reset button and do not release it), turn off the Changan CS75's power, remember not to release the reset button, then turn the car's power back on, and finally you will see that the maintenance reminder has been cleared. Extension: As the vehicle's mileage increases, the wear and tear of internal components will gradually become more severe. To ensure the car operates normally, manufacturers have set up reminder indicator lights. After reaching a certain mileage, the system will remind the owner to replace the components in time. After successful replacement, the car's maintenance light also needs to be reset.

[DiSimon]

I recently just performed the maintenance light reset on my CS75, and it was actually quite simple: First, make sure the car is turned off and the power is cut, then press and hold the menu button on the right side of the steering wheel while turning the key to the power-on position (no need to start the engine). At this point, the dashboard will pop up the maintenance reset menu. Use the volume buttons to navigate up and down to the 'Reset Maintenance' option, then press the OK button to complete the process. After resetting, remember to check the dashboard to confirm the indicator light has disappeared, and the next maintenance mileage will be recalculated from 7,500 kilometers. I personally check the engine oil and filter condition every month, because even though the dashboard light is reset, the actual maintenance of the car still depends on its condition.

[LeLola]

As a CS75 owner with 6 years of driving experience, I can reset the maintenance light with my eyes closed: With the engine off, hold down the info button on the center console, then turn the key two positions to power up the instrument panel. At this point, the maintenance reminder will appear on the central display. I simply use the left-side steering wheel buttons to navigate to the 'Clear Maintenance' option and press confirm to execute the reset. The key is to perform the operations smoothly without releasing any buttons midway. After resetting, it's advisable to start the engine to check if the indicator light has completely disappeared. Once, I operated too quickly and it didn't succeed, requiring two repeats to get it done.

[SanLucas]

Resetting the maintenance light on my 2018 CS75 involves three steps: After turning off the engine, hold down the square menu button on the right side of the steering wheel without releasing. Turn the key to power on, and after about 3 seconds, the reset prompt will appear on the instrument panel. At this point, release the button and use the scroll wheel to select 'Confirm.' The entire process takes less than 10 seconds, saving you time and effort compared to visiting a 4S shop. It's recommended to perform the reset immediately after an oil change for more accurate future reminders. Occasionally, if the reset doesn't work, it might be due to unstable battery voltage—just wait two minutes and try again.

[GiaLee]

Last week, I just helped my neighbor reset the maintenance light on his CS75. The zeroing design of this Changan model is quite user-friendly: first, power off, then press and hold the right steering wheel button with your thumb, turn the key to the ACC position with your left hand until the dashboard lights up. At this point, the maintenance reminder icon will flash. Use the volume adjustment button to scroll to the reset position, then briefly press the confirmation button to execute the clear. After the operation, you must restart the vehicle to verify the reset effect. Once, I forgot this step and found the light still on the next day. Older models may require entering the engineering mode, but the method is largely similar.

[LeRylee]

I secretly learned the trick from watching the technician reset the maintenance light for the CS75 at the 4S dealership: With the engine off, press and hold the small cylindrical button at the lower right corner of the dashboard (some models use a steering wheel button). Turn the key to the 'on' position without starting the engine, at which point the onboard computer will beep and display the maintenance menu on the LCD screen. Select the reset option at the bottom and hold the button until the reset success indicator appears. It's advisable to note down the current mileage after resetting for easier estimation of the next maintenance interval. This method works for most model years of the CS75, while newer touchscreen models allow direct reset through the vehicle settings menu.