What to Do When a Small Bulge Appears on the Side of a Tire?

2 Answers
EmilioMarie
09/05/25 4:52am
Tire sidewall bulges and scratches require replacement because a bulge indicates that one or more steel wires inside the tire have broken, causing the rubber to fail to withstand the internal pressure of the tire, resulting in the bulge. Below is an introduction to tires: 1. Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling on the ground. They are usually mounted on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. 2. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. 3. Tires must have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
Was this review help?
17
2
Share
DiOscar
09/17/25 5:20am
When I noticed a small bulge on the sidewall of my tire, I immediately became concerned because it usually indicates internal damage like broken cords, which can lead to a dangerous blowout at high speeds. I remember last time this happened, I pulled over to a safe spot to inspect it. If the bulge feels soft to the touch, it's a clear sign of internal issues, and I called for roadside assistance to put on the spare tire and headed straight to the repair shop. The mechanic confirmed that the tire needed replacement since sidewall damage can't be repaired—only tread damage can be fixed. Now, I make it a habit to regularly check my tires' condition and pressure, avoiding potholes and curbs to minimize the risk of bulges. Never overlook such seemingly minor issues—safety comes first. Spending money on new tires is worth it because life is priceless.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What is the main focus of the first-level maintenance for field vehicles?

Field vehicle first-level maintenance primarily focuses on cleaning, fastening, and lubrication, with an emphasis on inspecting safety components related to braking and operation. Below are the relevant details: 1. Vehicle maintenance: Refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as preventive measures. This ensures the vehicle's technical condition remains normal, eliminates potential hazards, prevents malfunctions, slows down component deterioration, and extends the vehicle's service life. 2. Main tasks: Conduct thorough cleaning of the vehicle and replace the air filter; inspect and secure the vehicle body for safety; check the fluid levels in the crankcase, carburetor, and brake system; inspect various internal vehicle components, such as the three-way catalytic converter.
1
0
Share

What is the displacement of the Volvo V90?

The displacement of the Volvo V90 is 2.0 liters. Below is related knowledge about the concept of the golden displacement in automobiles: Economy: Features fuel efficiency, conserving energy. Comfort: Good handling, power, and comfort. Versatility: Can meet various usage needs of consumers, such as business, commuting, travel, etc. It can maximally satisfy consumers' diverse automotive requirements and represents a model with a reasonable price, known as the golden displacement or golden model. Engine displacement is an important parameter for measuring a car. Additionally, some domestic cars do not have the model designation as mentioned above on their rear, but the displacement is usually indicated on the body or rear of the car.
7
4
Share

What are the symptoms of a broken car compressor?

Symptoms of a broken car compressor: 1. Air conditioning does not cool: When the AC switch is turned on, the engine speed does not increase. If air conditioning is not needed, removing the compressor belt can increase power by more than half a gear without affecting the car; 2. Exhaust valve damage: The compressor electromagnetic clutch coil burns out. Generally, if the intake and exhaust valves are broken, the compressor must be replaced. If the compressor electromagnetic clutch coil is burned, it can be replaced; 3. Compressor fails to rotate: There is abnormal noise during rotation, abnormal pressure, high pressure is low, low pressure is high; 4. The air conditioning compressor is not powered by electricity but is driven by the engine gear or belt. When the air conditioning is off, the compressor is idling.
5
0
Share

Can Subject Two and Subject Three be Scheduled Together?

Subject Two and Subject Three can be scheduled for examination at the same time, but simultaneous scheduling is not available in all regions and requires local conditions to support it. Below is the relevant content introduction: 1. Supporting simultaneous scheduling: If local conditions permit, candidates can schedule the exams through the national unified examination scheduling system using conventional scheduling methods, such as the Traffic Comprehensive Service Management Platform or the Traffic Management 12123 mobile app. 2. Relevant regulations: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the number of scheduled examinations for the site driving skill test and the road driving skill test (i.e., Subject Two and Subject Three) must not exceed five times. If the fifth examination is still failed, the previously passed examination results will be invalidated.
12
1
Share

Should an automatic transmission car be turned off first or shifted into P gear first?

It should be turned off first and then shifted into P gear. The correct shutdown procedure is to stabilize the car, shift the gear to N, engage the handbrake, turn off the engine, and then shift the gear to P. Here are the relevant introductions: 1. Automatic transmission: As the name suggests, an automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, an automatic transmission car has six gear positions, from top to bottom: P, R, N, D, S, L. 2. Automatic principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, an automatic transmission consumes more than 10% more fuel than a manual transmission.
19
2
Share

What is tire pressure loss?

Generally, there are three reasons for tire pressure loss. The first is related to load capacity. The second is related to seasonal changes. The third is related to tire specifications. Tire Pressure Reset: Tire pressure reset refers to the operation of resetting the tire pressure monitoring system after addressing a tire pressure malfunction. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.