What to Do When a Car Skids?

1 Answers
DelNora
07/30/25 8:23am
The solutions for dealing with a car skid are as follows: 1. Skidding caused by poor road conditions: In this situation, you should 'go with the flow,' keep a firm grip on the steering wheel, and appropriately reduce speed, allowing the vehicle to 'sway back and forth.' Avoid making sudden steering adjustments or using the foot brake. As long as you maintain a steady hold on the steering wheel and drive out of the poor road section, the skid will disappear. 2. Skidding caused by braking: Improper braking can lead to skidding, with the vehicle's tail swing being more noticeable. Braking 'pulling' usually starts with the front of the car swinging. In this case, immediately release the brake. If the road conditions necessitate braking to reduce speed, based on experience, if the speed is not too high, you can decisively press the clutch and cautiously try 'pumping the brakes.' This situation mostly occurs because the road's coefficient of friction decreases, reducing the braking force on the road. If the braking is slightly too strong, the wheels are prone to sliding. Pressing the clutch disengages the rear wheels from the engine's traction, reducing braking friction, which can minimize or balance the difference with the road's braking force. Using 'pumping the brakes' is also less likely to cause 'tail swing,' achieving the goal of deceleration to the greatest extent.
Was this review help?
10
3
Share
More Forum Discussions

What is the standard for the dipstick of a diesel engine?

The standard position for the dipstick of a diesel engine is approximately three-quarters between the upper and lower lines, which is considered the optimal position. The dipstick is a tool used to check the oil storage level, with clear upper and lower limit marks H and L. H represents the highest oil level (upper limit), while L represents the lowest oil level (lower limit). When the oil level falls below the L mark, the oil warning light will illuminate, indicating insufficient oil and the need for timely replenishment. More information about the dipstick is as follows: 1. Introduction: The engine dipstick does not need to be tightened. Typically, the plastic plug on the dipstick has a stop, and it can be securely fixed by inserting it to the stop position. 2. Usage precautions: Before checking the dipstick, ensure the car is in a cold state. Otherwise, the oil may not have fully returned to the oil pan, resulting in a naturally lower oil level reading. When checking the dipstick, make sure all four wheels of the car are on the same horizontal level, meaning there should be no tilt in any direction. The reason is that any tilt in the car body will alter the oil level in the oil pan, leading to inaccurate measurements.
4
1
Share

Can vehicle damage still be assessed after repairs?

Vehicle damage can still be assessed after repairs. The assessment of vehicle damage can be based on the repair evidence provided by the 4S shop. After a motor vehicle suffers damage, the owner can request corresponding compensation from the insurance company based on the purchased insurance. At this point, the insurance company needs to assess the vehicle damage. The following are some considerations regarding damage assessment: 1. Documentation for damage assessment: To verify the authenticity and reasonableness of the repairs, the insurance company requires invoices and repair lists for claims processing. 2. Determine the repair method in advance: For certain damaged parts of the vehicle, the insurance company's opinion on handling the damaged parts is generally repair-oriented, meaning that damaged parts that can be repaired and do not affect normal functionality should be repaired. If the damaged parts cannot be repaired, they can be replaced.
19
1
Share

Can Car Doors Leak Water?

Under normal circumstances, car doors do not leak water. Here is a detailed introduction about car doors: 1. Overview: The car door (car-door) provides an entrance and exit for the driver and passengers, isolating external interference. It can reduce side impacts and protect the driver to a certain extent. The design of the door is also related to the aesthetics of the car. 2. Others: The quality of a car door is mainly reflected in its anti-collision performance, sealing performance, and ease of opening and closing. A car door consists of the door body, door accessories, and interior trim panel. Car doors can be classified into forward-opening, reverse-opening, and horizontally sliding types.
1
0
Share

Is It Normal for Car Door Gaps to Be Uneven on Both Sides?

Car door gaps being uneven on both sides is not normal and requires timely repair. Here is a detailed introduction about car doors: 1. Overview: The car door provides a passage for the driver and passengers to enter and exit the vehicle while isolating external disturbances. It can reduce side impacts and protect the driver to a certain extent. The design of the car door also affects the vehicle's aesthetics. 2. Other Aspects: The quality of a car door is mainly reflected in its anti-collision performance, sealing performance, and ease of opening and closing. A car door consists of the door body, door accessories, and interior trim panel. Car doors can be categorized into front-hinged, rear-hinged, and sliding types.
12
5
Share

Differences Between Audi A6 Elegance and Sport Models

Here are the differences between the Audi A6 Elegance and Sport models: 1. Different exterior designs: The differences in appearance mainly focus on the fog light area. The Elegance model features two chrome trim strips in this area, while the Sport model has a larger black grille area, highlighting a more sporty style. Additionally, the wheel designs also reflect their respective styles. In terms of the interior, there is almost no difference in the layout of the center console, but the Elegance model uses a light color for the roof and A-pillars, while the Sport model opts for black. 2. Different seat styles: The Elegance model comes with full leather seats, whereas the Sport model uses a combination of leather and Alcantara material. Moreover, the seat design of the Sport model appears more sporty, while the Elegance model leans towards luxury. In other aspects, there are basically no differences.
6
4
Share

Where to Get Vehicle Inspection in Changsha?

Changsha vehicle annual inspection is handled by the Vehicle Management Office of the Traffic Police Detachment under Changsha Public Security Bureau. Annual inspection refers to the safety inspection conducted every year or every two years, which includes a comprehensive check of the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. The inspection schedule for different types of vehicles is as follows: 1. Small passenger vehicles enjoy a 6-year exemption for new cars: Family-use small passenger vehicles require inspection once every 6 years for new cars, and only need to collect the inspection certificate from the Vehicle Management Office every 2 years. 2. Small passenger vehicles aged 6-15 years require annual inspection: Family-use small passenger vehicles aged between 6 and 15 years need to be inspected once every year. 3. Vehicles over 15 years old require inspection every six months: Family-use small passenger vehicles over 15 years old need to be inspected once every six months.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.