What to Do If Your Vehicle's Annual Inspection Has Expired?

What Causes a Motorcycle to Make a Buzzing Sound but Not Start When Igniting?

The reasons why a motorcycle makes a buzzing sound but does not start when igniting are: 1. The battery is old and has no power; 2. In winter, the engine has not completed preheating due to low temperatures; 3. Spark plug failure, caused by prolonged use leading to performance degradation; 4. There is no gasoline left in the fuel tank; 5. Low temperatures cause the viscosity of the motorcycle's engine oil to increase, and in extreme cold, the oil may even solidify into clumps. The methods to start a motorcycle are: 1. Use the main stand to prop up the bike on level ground; 2. Stand in the direction the kickstarter is pressed—if the kickstarter is pressed forward, face forward and step on it to ignite; 3. If the kickstarter is pressed backward, face backward and step on it to ignite.

11

3

Share

What are the methods to eliminate the squeaking noise when wiper blades scrape the windshield?

The methods to eliminate the squeaking noise when wiper blades scrape the windshield are: 1. Clean the oily windshield with toothpaste; 2. Adjust the wiper arm with pliers; 3. Replace the wiper blades; 4. Remove any debris stuck between the wiper and the windshield; 5. Adjust the angle of the wiper arm. Steps to remove the wiper: 1. Lift the wiper arm from the windshield; 2. Press the release lock pin and slide the wiper along the arm; 3. Remove the wiper for replacement. Reasons why wipers do not clean effectively: 1. Oil film on the windshield; 2. Skipping of the wiper blade; 3. Aging or hardening of the wiper blade; 4. Debris between the wiper and the windshield; 5. Asymmetrical angle of the wiper arm.

16

3

Share

What is the difference between 5w30 and 0w20?

The differences between 5w30 and 0w20 are: the latter can withstand lower external temperatures than the former, while the former has higher oil viscosity than the latter. The choice should be made based on the vehicle's condition. Relevant information about automotive engine oil is as follows: 1. Oil grades represent different meanings: For example, in 15W-40, "W" stands for Winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating a lower usable environmental temperature. 2. Tips for correctly selecting engine oil: The viscosity of engine oil changes with temperature. Low winter temperatures increase the viscosity of the oil when stationary at night, making it thicker. This is also the main reason why the oil pump may have difficulty drawing oil and starting the engine sometimes becomes harder.

3

4

Share

What does the M+- in an automatic transmission mean?

Automatic transmission M+- refers to the manual mode's gear up or gear down function. A semi-automatic transmission has a manual mode feature; when shifted into M gear, the vehicle operates like a manual transmission car, allowing the driver to control the gears. Relevant information about semi-automatic transmissions is as follows: 1. Composition of a semi-automatic transmission: A semi-automatic transmission is a gearbox that combines manual and automatic transmission functions, consisting of a gearbox, electronically controlled clutch, automatic shift control mechanism, and electronic control components. 2. Other gears in an automatic transmission are: D gear stands for drive gear; R gear stands for reverse gear; P gear stands for parking gear; L gear stands for low gear.

20

4

Share

What are the differences between 235T and 270T?

The differences between the 235T model and the 270T model mainly lie in two aspects: power and emission standards. The following are the specific differences: 1. Different emission standards: All 235T models comply with the China V emission standard, while all 270T models comply with the China VI emission standard. 2. Different power outputs: The 235T model is the low-power version, and the 270T model is the high-power version. The 235T model has a maximum power of 112KW, maximum horsepower of 152PS, maximum torque of 235N·m, maximum power speed of 5000rpm, and maximum torque speed range of 1450~4250rpm. The 270T model has a maximum power of 124KW, maximum horsepower of 169PS, maximum torque of 265N·m, maximum power speed of 5000rpm, and maximum torque speed range of 1700~4000rpm.

15

0

Share

What is the solution for flooded spark plugs in fuel-injected vehicles?

The solution for flooded spark plugs in fuel-injected vehicles is: 1. Dry the spark plugs by heating them; 2. Check if the engine's intake system is leaking or blocked. The working principle of spark plugs is: Under the control of the engine, they introduce the high-voltage electricity generated by the ignition coil into the engine cylinder, creating a spark between the spark plug electrode gaps to ignite the air-fuel mixture, ensuring the engine runs smoothly. The method for removing spark plugs: 1. Clean any dust or debris around the spark plugs using compressed air or a soft tube to blow it away; 2. Ensure the engine is in a cold state before proceeding; 3. Immediately protect the spark plug hole after removal to prevent any debris or dust from entering the cylinder; 4. Avoid damaging the insulating ceramic body when using a wrench; 5. When adjusting the spark plug gap, do not bend or strike the center electrode.

13

2

Share

What to Do If Your Vehicle's Annual Inspection Has Expired?

What Causes a Motorcycle to Make a Buzzing Sound but Not Start When Igniting?

What are the methods to eliminate the squeaking noise when wiper blades scrape the windshield?

What is the difference between 5w30 and 0w20?

What does the M+- in an automatic transmission mean?

What are the differences between 235T and 270T?

What is the solution for flooded spark plugs in fuel-injected vehicles?

What Causes the Engine Emission Control System Warning Light to Illuminate?

How to adjust the time on a 2012 Kia K2?

What is the reason why the automatic headlights of the Tiguan L stay on during the day?

What is the reason for the EPC light coming on, the vehicle shaking, and then returning to normal after restarting?