What to Do If You Can't Pass the Driving Test (Subject 3)?

What is the speed limit on Li-Ning Expressway?

The maximum speed limit for small vehicles on the entire Li-Ning Expressway is 100km/h. The reasons for the 120km/h speed limit on expressways are as follows: 1. Road factors: The 120km/h limit is set based on China's road design standards. The friction coefficient of the road surface, the strength of guardrails, lane width, slope, curvature radius, and sign size are all designed according to the 120km/h standard. If the speed limit is increased recklessly, all related designs would need to be revised, and existing expressways would face reconstruction, which would be extremely costly. 2. Driver factors: The driver's vision, field of view, and reaction time are the three most important factors affecting traffic safety. Generally, as speed increases, a person's field of view and vision decrease. 3. Vehicle factors: Vehicles can run at 120km/h without any issues. In the event of a tire blowout at this speed, there is still a chance of survival. However, at 200km/h, the chance of survival is virtually zero. 4. Environmental factors: Environmental factors include multiple aspects, such as adverse weather conditions, poor road conditions, a mix of vehicle types, overall poor vehicle condition, speeding, fatigue driving, and overloaded transportation. When adverse weather conditions like rain, snow, fog, or ice occur, the safety coefficient of road traffic significantly decreases, requiring drivers to actively reduce speed to ensure safety.

15

4

Share

How to Change a Tire Without a Jack?

First, you need to find a sturdy wooden pole that is long enough to lift the car a few centimeters off the ground when supporting it. Tilt the pole and place it under the front bumper or rear frame crossbeam on the side where the tire needs to be removed, then slowly start the car. Once the pole stands vertically and lifts the car, place bricks or wooden blocks under the wheel. Drive the car onto soft soil and use the same method to support the car with the pole, then you can remove the damaged tire.

19

4

Share

What is a Diesel Particulate Filter in Cars?

A diesel particulate filter (DPF) is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they are released into the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. The densely arranged bag-type filters inside the DPF capture the carbon particles on a filter made of metal fiber felt. When the accumulated particulate matter reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if a car is equipped with a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, carefully review the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look behind the three-way catalytic converter on the exhaust pipe for a cylindrical section. If present, it is the particulate filter.

20

3

Share

Does Rain Affect Motorcycles?

Rain can indeed affect motorcycles. Rainwater may cause disc brake failure, allow water to enter the fuel tank leading to carburetor water contamination (affecting startup and engine performance), and dampen spark plugs making ignition difficult. Daily motorcycle maintenance methods include: 1. During the break-in period, maintain idle speed at 100 rpm; 2. Match gears with appropriate speeds; 3. When braking is required, release the throttle, press the rear brake with your right foot while gently applying the front brake with your right hand; 4. Regularly inspect spark plugs; 5. For new spark plug installation, hand-tighten until snug then use a spark plug wrench to tighten an additional 1/4 to 1/2 turn; 6. Regularly lubricate the chain.

16

4

Share

What is the fuel consumption of the Wrangler?

The fuel consumption of the Wrangler is 9 liters/100KM. Meaning of fuel consumption: Vehicle fuel consumption refers to the fuel consumed when driving a certain distance at a specified speed, serving as a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value measured by manufacturers under controlled conditions using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then used to calculate the theoretical experimental fuel consumption data for the model at specified speeds. Classification of fuel consumption: Fuel consumption includes constant-speed fuel consumption and road cycle fuel consumption. Constant-speed fuel consumption refers to the fuel economy indicator when a car is driven at a constant speed on good road conditions, while road cycle fuel consumption is the fuel economy indicator measured when a car is driven in repeated cycles according to specified speeds and time norms on the road, also known as multi-condition road cycle fuel consumption.

2

1

Share

What does the wrench symbol on a car indicate?

When a wrench symbol appears on your car, it is a maintenance reminder indicator, signaling that the vehicle is due for service. This is typically a feature set by manufacturers to alert owners to perform scheduled maintenance based on mileage. The purpose of the maintenance indicator is to notify the driver to service the vehicle after it has been driven a certain distance. The maintenance reminder is part of the car's built-in system, which resets the mileage and time counters after each service. These counters can be customized; for example, they can be set to 10,000 kilometers. When the car reaches this mileage, the maintenance reminder will appear on the dashboard. Vehicles equipped with an onboard computer may display a text message, while those without might only show a "small wrench" symbol. Different manufacturers set varying maintenance intervals, so the exact timing for the wrench symbol to appear should be checked in the vehicle's user manual. After servicing, a technician will reset the maintenance light using a specific procedure. Steps to reset the reminder: Insert the key into the ignition, but do not turn it. Hold down the trip meter reset button for 5 to 10 seconds, then turn the ignition to the "on" position. Wait another 5 to 10 seconds, then start the engine. Keep holding the reset button throughout this process. Following these steps should clear the wrench symbol. If it remains, repeat the process a few times.

18

5

Share

What to Do If You Can't Pass the Driving Test (Subject 3)?

What is the speed limit on Li-Ning Expressway?

How to Change a Tire Without a Jack?

What is a Diesel Particulate Filter in Cars?

Does Rain Affect Motorcycles?

What is the fuel consumption of the Wrangler?

What does the wrench symbol on a car indicate?

How to Remove the Car Air Conditioning Vents?

Is Parking on a Slope Seriously Damaging to the Car?

What are the effects of wet car seats?

Will Insurance Cover a Car Flooded in the Garage?