What to Do If Vision Fails to Meet the Standard for Driver's License Renewal?

1 Answers
DiFinley
07/30/25 6:57am
You can get a pair of glasses and undergo the physical examination again; if you still fail to meet the standard after adjustment, the vehicle owner must cancel their driver's license at the local vehicle management office within 30 days. Below is the relevant information: 1. Physical examination for license renewal: A physical examination is required for driver's license renewal, and a certificate of physical condition issued by a medical institution at or above the county level or a military regiment level is needed. The examination items include: height, vision, color discrimination, hearing, and whether the limbs are sound. Adjustments and treatments should be made based on the areas that fail the examination, followed by another physical examination for license renewal. 2. Places for the physical examination: Physical examination services are usually provided at the vehicle management office where the license is renewed. If the vehicle management office does not provide such services, the vehicle owner can go to a hospital at or above the county level for the examination, such as a hospital in the city confirmed by the health bureau or a disease prevention and control center; they can also go to a central hospital in the city or a county central hospital.
Was this review help?
19
2
Share
More Forum Discussions

What Transmission Does the BYD F3 Use?

The transmission used in the BYD F3 is manufactured by Japan's Jatco. Established in 1943, Jatco is one of the world's top three automatic transmission suppliers, with operations spanning Europe, Asia, and the Americas. It primarily supplies automatic transmissions to mainstream automakers such as Nissan, Mitsubishi, Mazda, BMW, Volkswagen, Land Rover, Jaguar, Kia, Hyundai, Daewoo, Changan Ford, and Brilliance. The BYD F3 is equipped with a 5-speed manual transmission. A manual transmission is a gear-shifting device that alters the engine's speed and torque delivered to the drive wheels, enabling the vehicle to achieve varying traction and speed under different conditions such as starting, climbing hills, turning, and accelerating. For the BYD F3's transmission, the following points should be noted during daily use: Do not delay transmission oil changes for extended periods. Prolonged neglect can damage internal components like bearings and the housing. Avoid prolonged coasting in neutral. While some experienced drivers may coast in neutral with manual transmissions, doing so in an automatic can cause overheating and jarring when shifting back to Drive (D). Never engage Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift prematurely to demonstrate smooth operation, but this harms transmission gears and may lead to grinding or other failures over time. Avoid frequent uphill climbs in Drive (D). On steep slopes, automatic transmissions may overheat due to high loads or upshift too early, reducing climbing power. Use manual mode to lock in lower gears or sport mode to protect the transmission. Do not tow over long distances. If the automatic vehicle breaks down, use a flatbed tow truck with the transmission in Neutral (N). Never tow directly with a rope or similar method.
8
4
Share

What does 88V on a tire mean?

88V on a tire refers to the load index and speed rating. The number 88 indicates the load index, while the letter V represents the speed rating. The main functions of tires include: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the car's power performance, braking performance, and off-road capability; 3. Working together with the car's suspension system to cushion the impact during driving and dampen the resulting vibrations; 4. Protecting the car's components from severe vibrations, adapting to the vehicle's high-speed performance, reducing driving noise, and ensuring driving safety, handling stability, comfort, and fuel efficiency.
6
5
Share

What is the maximum speed limit for driving on curves?

The maximum speed when driving on curves should not exceed 30 km/h. Turning path: Outside-inside-outside. Try to turn with a large arc that tends to be straight. Turning principles: Slow in, moderate throttle, fast out. Before entering the curve while still driving straight, you should first apply the brakes to slow down the car. If the curve is large, you should further reduce the speed and downshift one gear. Uphill curves: When navigating an uphill curve, release the throttle before entering the curve, allowing the vehicle to enter the curve at a relatively high speed along the outside. Then downshift one or two gears, choose your path and adjust direction while applying light throttle. After passing the apex of the curve, move back to the outside of the curve while increasing throttle, and finally exit the curve quickly along the outside.
17
0
Share

What is the proportion of high-strength steel in the Lingpai's body?

The proportion of high-strength steel in the Lingpai's body is 48%, utilizing 980 MPa steel and hot-formed steel, and adopting the ACE Advanced Compatibility Engineering body structure. Taking the Lingpai 2020 Hybrid 1.5L Comfort Edition as an example: this model is equipped with a 1.5L 109-horsepower L4 naturally aspirated engine and an E-CVT continuously variable transmission, with a maximum power output of 113 kW. The dimensions of the Lingpai 2020 Hybrid 1.5L Comfort Edition are a length of 4756mm, width of 1804mm, height of 1509mm, a wheelbase of 2730mm, a fuel tank capacity of 40 liters, and a curb weight of 1378 kg.
8
4
Share

How many liters of coolant does the Swift require?

The Swift requires approximately 5 liters of coolant. The coolant filler port is located in the engine compartment. When replacing the coolant, first open the drain outlet, then open the filler port. After completely draining the old coolant, you can flush the radiator with filtered tap water before adding new coolant. Taking the Swift 2016 1.5L Manual Fashion model as an example: This vehicle is equipped with a 1.5L 103-horsepower L4 naturally aspirated engine and a 5-speed manual transmission, with a maximum power output of 76 kW and a maximum torque of 138 Nm. The body dimensions of the Swift 2016 1.5L Manual Fashion model are 3765mm in length, 1690mm in width, 1510mm in height, with a wheelbase of 2390mm.
16
0
Share

What are the reasons for the BYD Qin's side mirrors not retracting after locking the car?

The reasons for the BYD Qin's side mirrors not retracting after locking the car: 1. The automatic retraction function for the side mirrors has been turned off; it can be enabled in the central control panel. 2. There is a fault in the circuit connector. The car's side mirrors reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, acting as a second pair of eyes and expanding the driver's field of vision. Taking the Qin New Energy 2020 Long Range Luxury Edition as an example: the car is equipped with a fixed gear ratio transmission, with a maximum power of 100 kW and a maximum torque of 180 Nm. The Qin New Energy 2020 Long Range Luxury Edition has a body size of 4675mm in length, 1770mm in width, and 1500mm in height, with a wheelbase of 2670mm.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.