What to Do If the Tire Rim is Scratched?

Can 215 Tires Be Replaced with 225 Tires?

Technically, it is possible to replace the original 215 tires with 225 tires, but it is not allowed under traffic laws and may result in failing the annual inspection. This is because both 215 and 225 represent the tire's cross-sectional width, and switching from 215 to 225 essentially changes the tire size, which requires filing for approval. However, compared to 215 tires, 225 tires offer a wider tread, larger diameter, greater contact area, stronger grip, and improved driving stability. Tires support the entire weight of the vehicle: Vehicle tires bear the full weight of the car, handle its load, and transmit forces and moments in other directions. Tires can enhance vehicle performance: Vehicle tires transmit traction and braking torque to ensure good adhesion between the wheels and the road, improving the car's power, braking, and off-road capabilities. They also work with the suspension to absorb shocks and dampen vibrations during driving. Tires can prevent early damage to vehicle components: Vehicle tires protect components from severe vibrations and premature wear, adapt to high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency.

7

3

Share

Can a car pass on a 2-meter-wide road?

A 2-meter-wide road can generally accommodate most passenger cars. Expressway width specifications: Road scale: minimum two-way four lanes or one-way two lanes, lane width 3.75 meters (3.5 meters for emergency lanes), service life exceeding 15 years. Primary highway width: Designed shoulder width ranges from 1.5 to 3 meters, with minimum subgrade width in difficult terrain (mountainous areas) controlled at approximately 16 to 25 meters, standard service life of 20 years. Secondary highway width: Subgrade width for automobile-specific secondary highways typically measures 13 meters and 9 meters respectively, while general secondary highways measure 15 meters and 10 meters respectively. Tertiary highway width: Subgrade width for tertiary highways ranges from 8.5 to 10.5 meters in flat terrain, and 7.5 to 9.5 meters in mountainous areas, with standard service life of 10 years.

13

2

Share

What is the vibration standard for a 3000 rpm steam turbine?

For a steam turbine operating at 3000 rpm, a double amplitude vibration below 25um is considered good, while below 50um is acceptable. Consistency in vibration measurement positions is required: The standard specifies vibration measurements in three directions of the bearing: vertical, horizontal, and axial. During vibration measurements, the position for each measurement must remain consistent; otherwise, significant measurement errors may occur. Vibration amplitudes in all three directions must not exceed specified values: If the vibration amplitude in any of the three directions exceeds the specified value, the vibration condition of the unit is deemed unacceptable, and measures should be taken to eliminate the vibration. Critical speed vibration should not exceed 100um: Emergency stop measures also stipulate that if the vibration suddenly increases by 50um during operation, the turbine should be tripped immediately. Additionally, the maximum vibration at critical speed should not exceed 100um.

10

1

Share

What are the displacements of 330t and 380t?

330t has a displacement of a low-power version 2.0-liter turbocharged engine, while 380t has a displacement of a high-power version 2.0-liter turbocharged engine. The differences between 330t and 380t are as follows: Different torque: The maximum torque of the engine represented by 330 is 320N·m, while the maximum torque of the engine represented by 380 is 350N·m. There are usually letters following the numbers, such as TSI, which indicates that the vehicle is equipped with a turbocharged engine. Different engine power: The horsepower of 330 is around 186Ps, while the horsepower of 380 is around 220Ps, providing stronger power.

5

3

Share

Is the 4G93D engine a Mitsubishi engine?

4G93D engine is a Mitsubishi engine. Compact engine structural design: The compact structural design makes it smaller in size and lighter in weight compared to engines of the same displacement. High rigidity of engine components: The main components of the engine have high rigidity, and the main moving parts are designed with lightweight materials to reduce friction loss. Use of vibration-damping resin materials in the engine: By adopting efficient combustion methods such as rolling combustion and optimal fuel injection, along with technologies like enhancing the rigidity of the cylinder block and crankshaft and using vibration-damping resin materials for some parts, the engine noise is minimized.

17

4

Share

What is the function of the Lane Departure Warning System?

The function of the Lane Departure Warning System is: The Lane Departure Warning System provides intelligent lane departure warnings. When the driver unconsciously (without signaling) deviates from the original lane, it can issue an alarm 0.5 seconds before the lane departure occurs, or start vibrating the steering wheel to alert the driver about the current lane departure situation. This provides the driver with more reaction time, significantly reducing collision accidents caused by lane departure. Relevant information is introduced as follows: According to statistics, about 50% of car accidents are caused by vehicles deviating from the normal driving lane, mainly due to the driver being distracted, inattentive, or fatigued.

20

4

Share

What to Do If the Tire Rim is Scratched?

Can 215 Tires Be Replaced with 225 Tires?

Can a car pass on a 2-meter-wide road?

What is the vibration standard for a 3000 rpm steam turbine?

What are the displacements of 330t and 380t?

Is the 4G93D engine a Mitsubishi engine?

What is the function of the Lane Departure Warning System?

What are the reference points for reversing into a garage at 160cm?

Does a car registered in September 2012 require an annual inspection in 2021?

Can an 18-year-old apply for a B2 driver's license?

What is the fuel consumption per 100 kilometers for a 2.5L engine?