What to do if the paint of Geely Vision X3 peels off?

What does the car width light mean?

Width lights can also be called clearance lights. Here is some relevant knowledge about car lights: Clearance lights: These are the outermost lights at the front and rear of the vehicle. Large trucks also have clearance lights on the roof and sides. From the literal meaning, "clearance" means warning, and "light" refers to outline. Therefore, clearance lights are warning lights used to alert other vehicles. Installed at the edges of the car roof, they indicate both the height and width of the vehicle. Safety standards require that vehicles taller than three meters must be equipped with clearance lights. The color of clearance lights is white at the front and red at the rear. They are used during nighttime driving to make the vehicle visible to others. Car headlights: Also known as car front lights or LED daytime running lights, as the eyes of the car, they not only relate to the owner's external image but are also closely linked to safe driving at night or in bad weather conditions. The use and maintenance of car lights should not be overlooked.

20

3

Share

Does a Wet Carpet Due to Sunroof Leakage Count as a Water-Damaged Vehicle?

Wet carpet due to sunroof leakage does not count as a water-damaged vehicle. Below are the introduction to wading depth and its impact on vehicles: Introduction to Wading Depth: Maximum wading depth refers to the distance between the tire contact point and the engine air intake, known as Wattiefe in English. The maximum wading depth is the greatest depth a vehicle can safely pass through under safe driving conditions, also referred to as the safe depth. It is also an important indicator for evaluating a vehicle's off-road capability—the greater the maximum wading depth, the stronger its water-crossing ability. Impact of Wading Depth on Vehicles: Wading depth is determined by the height of the vehicle's chassis, which corresponds to the "ground clearance" item in the vehicle's parameter configuration table. The greater the ground clearance, the higher the chassis, and the higher the safety coefficient when the vehicle passes through waterlogged roads.

3

5

Share

How to Turn the Steering Wheel When Reversing?

The method for turning the steering wheel when reversing is: turn the steering wheel to the left, and the rear of the car will move to the left; turn the steering wheel to the right, and the rear of the car will move to the right. Choose the direction to turn the steering wheel based on your specific situation. Precautions for reversing include: 1. Adjust the interior rearview mirror properly; 2. Pay attention to both side mirrors simultaneously; 3. Control the speed of the vehicle; 4. Stop promptly if there are pedestrians or oncoming vehicles; 5. Use the reversing camera to judge the accurate distance. The function of the steering wheel is: to convert the force applied by the driver on the edge of the steering wheel into torque and transmit it to the steering shaft. Precautions for using the steering wheel include: 1. Control the steering wheel by pushing with the left hand and pulling with the right hand in a smooth and even motion; 2. When holding the steering wheel, use your hands to support it to reduce bad driving habits; 3. Turn the steering wheel more for more correction, less for less correction, and quickly for quick correction. When returning the steering wheel, do it swiftly and accurately.

16

0

Share

How to remove the rear shock absorber spring of Audi A6L?

Audi A6L rear shock absorber removal method is to remove the wheel arch guard panel, remove the 18 bolts connecting the lower control arm at the bottom, and then loosen the two 13 bolts on the top. Shock Absorber: The shock absorber is mainly used to suppress the oscillation when the spring rebounds after absorbing shock and the impact from the road surface. When passing through uneven road surfaces, although the shock-absorbing spring can filter the vibration of the road surface, the spring itself will still have reciprocating motion, and the shock absorber is used to suppress this spring jump. Principle of Shock Absorber: If the shock absorber is too soft, the car body will jump up and down; if the shock absorber is too hard, it will bring too much resistance and hinder the normal operation of the spring. In the process of modifying the suspension system, a hard shock absorber should be matched with a hard spring, and the hardness of the spring is closely related to the weight of the car. Therefore, heavier cars generally use harder shock absorbers. The device connected to the vibration damping crankshaft is used to counteract the torsional vibration of the crankshaft (that is, the phenomenon that the crankshaft is twisted by the impact force of the cylinder ignition).

2

5

Share

Do Cars Need to Warm Up in Summer?

Cars do need to warm up in summer. Here are the reasons why warming up is necessary and the methods for warming up a car: Reasons why warming up is necessary: When the engine is first started, its temperature is low, and the lubricating oil has not yet reached all parts. Driving immediately can cause dry friction between components, leading to wear and tear. However, the warm-up time does not need to be too long. The standard for determining when the car is ready is when the water temperature gauge needle starts to move, or when the engine tachometer drops back to idle speed after starting, which takes about a minute. It is recommended that drivers start slowly for the first 2 kilometers before accelerating normally. Methods for warming up a car: Driving to warm up the car is the best method, as it allows the lubrication and cooling systems to activate naturally during the driving process. Pay attention to the tachometer: after starting the car, the engine speed will increase, and the engine will automatically increase the fuel injection concentration. Wait until the speed stabilizes before starting to drive.

12

2

Share

What is the reason for the Peugeot 408 fan not working?

In such cases, it is mainly due to issues with the fan circuit or problems with the control system. It is recommended to check whether the fan rotates after turning on the air conditioning. If it does not rotate, then there is definitely a problem with the fan circuit. Below is the relevant introduction: 1. Peugeot 408: The Peugeot 408 is a compact car launched by Dongfeng Peugeot on January 25, 2010, equipped with the mainstream engines of the DPCA, with two displacement options: 2.0L and 1.6L. The launch of the Peugeot 408 greatly enriched Dongfeng Peugeot's product line in the 1.6L-2.0L golden displacement market. 2. Model introduction: The maximum power of this CVTS-Ⅱ engine is 108KW/6000rpm, and the maximum torque is 200N.m/4000rpm, which is basically the same as the current 307's 2.0L engine. Although there seem to be no major changes, incorporating more new technologies on the basis of mature power is Dongfeng Peugeot's approach to seeking stability.

1

2

Share

What to do if the paint of Geely Vision X3 peels off?

What does the car width light mean?

Does a Wet Carpet Due to Sunroof Leakage Count as a Water-Damaged Vehicle?

How to Turn the Steering Wheel When Reversing?

How to remove the rear shock absorber spring of Audi A6L?

Do Cars Need to Warm Up in Summer?

What is the reason for the Peugeot 408 fan not working?

What to Do When the Car Fuel Tank is Full?

What disinfectant should be used for car disinfection?

What is the fuel tank capacity of the Baojun 630?

Is it necessary to display the compulsory insurance decal on the vehicle?