···
Log in / Register

How many points are deducted for stalling during Subject 2?

6Answers
DePiper
08/28/2025, 04:08:42 AM

If the engine stalls once due to improper operation, 10 points will be deducted. Other common situations that result in point deductions include the following: If the vehicle body crosses the line, fails to enter the garage during reversing, stops midway, does not follow the prescribed route or sequence, or exceeds the allotted time, 100 points will be deducted. For the slope parking test, if the right side of the vehicle body is more than 30 cm from the roadside line after parking, 10 points will be deducted; if it exceeds 50 cm, 100 points will be deducted. If the vehicle rolls back and crosses or touches the line, 100 points will be deducted. If the front bumper is not aligned with the pole line and deviates by more than 50 cm, 10 points will be deducted; if it exceeds 50 cm, 100 points will be deducted. The full score for Subject 2 is 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed under the following conditions: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required.

Was this review help?
105
Share
DeLeila
09/10/2025, 02:16:53 AM

Last time when teaching a beginner, someone asked how many points would be deducted for stalling during the Subject 2 test. I remember clearly that it's a 10-point deduction, and you need at least 80 out of 100 to pass. During the test, in sections like hill starts or reversing into a parking space, if you release the clutch too quickly, it's easy to stall. After the deduction, don't panic—quickly press the clutch, shift to neutral, restart the engine, and continue the operation. When training students, I always emphasize the importance of practicing the coordination between the accelerator and clutch, especially simulating test conditions. Focus on controlling the pedals rather than the outcome to reduce mistakes. One stall isn't a big deal, but if it happens repeatedly, you might fail. So, the key is to stay calm and not panic.

Was this review help?
7
Share
Expand All
DeAliyah
10/24/2025, 03:08:13 AM

I just finished my Subject 2 driving test recently, let me share my experience. During the test, the engine stalled once while reversing into the parking space, and the examiner said it would deduct 10 points directly. Fortunately, not too many points were deducted in other sections, so I passed in the end. The total score is 100, with 80 being the passing mark. A 10-point deduction for stalling is considered minor, as long as no other mistakes are made. After stalling, you need to restart the engine immediately; don't just sit there or you might lose more points. During practice, I found that controlling the clutch is key, especially on slopes—lifting the clutch slowly makes the car more stable. The pressure during the test can easily make you flustered, so doing a few mock tests beforehand helps avoid mistakes.

Was this review help?
8
Share
Expand All
McMalia
12/07/2025, 02:30:04 AM

Stalling in Subject 2 deducts 10 points, don't panic. I often browse driving test forums, and everyone says the same thing. If you stall, immediately restart the engine and keep driving, don't waste time. The reason might be poor clutch control, with hill starts being the most dangerous. After deducting 10 points, if you make fewer mistakes elsewhere, you can still pass. Usually, focus more on coordinating the throttle and clutch during practice to reduce such incidents.

Was this review help?
7
Share
Expand All
Gandalf
01/27/2026, 03:45:13 AM

When helping my child prepare for the driving test, I found that stalling during Subject 2 results in a 10-point deduction, with a passing score of 80 out of 100. In real driving, stalling is unsafe, especially in heavy traffic, so the test deduction serves as a reminder to master the skills. It's advisable for young drivers to practice fundamental techniques, such as slowly releasing the clutch for a smooth start. If the car stalls, don't stop—quickly restart and continue the test. This deduction isn't fatal, but more practice can prevent it.

Was this review help?
16
Share
Expand All
AuroraLee
04/23/2026, 01:48:28 AM

As a driving instructor, stalling during Subject 2 typically deducts 10 points, with a passing score of 80 out of 100. Stalling is often caused by releasing the clutch too quickly or poor coordination between the clutch and accelerator, especially during hill starts. If points are deducted, don't delay—immediately press the clutch, shift to neutral, restart the engine, and continue the test. It's advisable to check the vehicle's condition before the test, such as the clutch travel, and maintain a relaxed mindset to minimize mistakes. Solid foundational practice is more important than last-minute cramming.

Was this review help?
7
Share
Expand All
More Q&A

What are the differences between Toyota Alphard and Vellfire?

The differences between Toyota Alphard and Vellfire lie in their rear suspension types: the Toyota Alphard features a double-wishbone independent rear suspension, while the Toyota Vellfire is equipped with a double-wishbone independent rear suspension. Both the Toyota Alphard and Toyota Vellfire share identical body dimensions: length 4975mm, width 1850mm, height 1945mm, with a wheelbase of 3000mm, a fuel tank capacity of 58 liters, and a curb weight of 2270kg. Both models are powered by a 2.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, a maximum power output of 86kW, and a maximum torque of 198Nm, paired with an electronic continuously variable transmission.
116
Share

What type of fuel should a BMW 5 Series use?

BMW 5 Series requires 95 octane gasoline. Below are the detailed explanations: Reasons: Equipped with a turbocharged engine. Turbocharged engines have relatively small compression ratios, but the pressure and temperature inside the cylinders during operation are very high. Gasolines with different octane ratings have varying levels of octane values—the higher the octane rating, the higher the octane value, and the better the fuel's anti-knock properties. 95 octane gasoline has a high octane value. Using gasoline with a lower octane value can easily cause engine knocking, leading to reduced engine performance, damage to engine components, and sluggish acceleration while driving. Therefore, 95 octane gasoline is recommended. Different octane gasolines should not be mixed: Long-term mixing of different octane gasolines can affect the lifespan of the vehicle's ignition system, fuel injectors, and spark plugs, accelerating the need for major repairs. Whenever possible, strictly adhere to the vehicle's requirements for the specified octane rating. Using lower octane gasoline can cause engine knocking, and in severe cases, may lead to bent valves, damage to the valve cover, and other issues.
104
Share

How Long Can a Car Drive Continuously Before Needing a Break?

After driving continuously for 4 hours, the car should take a break at a service area for at least twenty minutes. Below are some precautions regarding highway driving: 1. Speed: (1) For novice drivers on the highway, the speed should generally be between 80 100, with 90 being the recommended cruising speed. (2) When exiting the highway and entering the ramp, apply the brakes twice: first, when you see the 500-meter exit sign, reduce speed to 60 70; second, when entering the ramp, reduce speed to 40. 2. Driving and Lane Changing: Generally, there is no need to change lanes or merge. Others can only overtake from the right, and when overtaking others, do so directly.
109
Share

How to Check the Tire Pressure Monitoring in Civic?

Honda Civic does not have an active monitoring function. It will only automatically display information on the dashboard when there is an abnormality in the tires. The display does not show specific values, only indicating which tire has a problem. Below is more information about tire pressure monitoring: 1. The role of tire pressure monitoring: The tire pressure monitoring system is designed to automatically monitor the tire pressure in real-time while the car is in motion and to alert the driver in case of tire leaks or low pressure to ensure driving safety. 2. Types of tire pressure monitoring: (1) Indirect type: This system compares the rotational speed differences between tires using the wheel speed sensors of the car's ABS system to monitor tire pressure. (2) Direct type: This system uses pressure sensors installed in each tire to directly measure the tire pressure. It then transmits the pressure information from inside the tire to a central receiver module via wireless transmitters and displays the tire pressure data for each tire.
108
Share

What Causes the Fuel Pump Nozzle Not to Click Off?

Normally, the failure to click off is not an issue with the car. The design principle of the gasoline nozzle at gas stations is actually quite simple. It clicks off because when the fuel reaches a certain level, combined with the pressure and air in the fuel tank reaching a certain amount, it automatically triggers the switch inside the nozzle, causing it to click off. Gas station precautions: 1. No smoking: Strictly no open flames is a common warning seen everywhere at gas stations. For those who have the habit of lighting a cigarette when parked, this habit must not be brought to the gas station. This is because the concentration of gasoline in the unit space increases during refueling, and an open flame could potentially ignite the gasoline. 2. Turn off the engine while refueling: Most car owners are aware that the engine should be turned off during refueling. Every time you drive into a gas station, the staff will also remind you to turn off the engine. However, at some self-service gas stations or smaller stations, instances of refueling without turning off the engine have indeed been observed.
115
Share

How to Remove the Headrest of a Chevrolet Malibu?

To remove the headrest of a Chevrolet Malibu, follow these steps: Press the plastic button located below the headrest support rods with one hand, while holding the headrest with the other hand. Lift the headrest upwards continuously until the support rods detach from the seat, allowing the headrest to be removed. The primary function of a car headrest is to protect the fragile neck and provide cushioning for the head in the event of a rear-end collision. The Chevrolet Malibu is equipped with a 9-speed automatic transmission, front MacPherson independent suspension, rear multi-link independent suspension, and features such as tire pressure monitoring, seatbelt reminder for all seats, electronic stability control, brake assist, and rear radar.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.