What to Do If the Honda Avancier 2.0T Has High Fuel Consumption?

2 Answers
LaJohn
08/28/25 4:16am
Honda Avancier 2.0T has high fuel consumption. It is necessary to clean the engine carbon deposits regularly, and the oil filter, air filter, and fuel filter must be replaced periodically during vehicle use. Below is relevant information about the fuel consumption of the Avancier 2.0T: 1. Avancier 2.0T Fueling: The Avancier 2.0T engine only requires 92# gasoline, which gives it better fuel adaptability compared to Toyota's 2.0T engine. 2. Actual Fuel Consumption of Avancier 2.0T: The actual average fuel consumption of the Avancier 2.0T is 10.8L/100KM, approximately 0.67 yuan per kilometer. Relatively speaking, it is quite fuel-efficient.
Was this review help?
19
0
Share
Serena
09/10/25 2:45am
I've been driving my Honda Avancier 2.0T for a few years, and it's normal for the fuel consumption to be a bit high, but if it's too high, I can't stand it. The first thing to do is to check the tire pressure. If the pressure is too low, it increases rolling resistance, and the fuel consumption shoots up. I usually use a pressure gauge to check and keep it around 2.5 bar. The air filter also gets dirty easily. If it's full of dust when I take it out, I replace it with a new one—it's cheap and doesn’t cause any trouble. I also pay attention to the engine oil condition. I use 0W-20 full synthetic oil and change it every 5,000 kilometers to keep the engine running smoothly. When driving, I avoid always using the air conditioning on full blast; setting the temperature around 25 degrees is enough. Making these small adjustments gradually can reduce fuel consumption significantly, saving enough money to drive dozens of extra kilometers. If that still doesn’t help, I take it to a repair shop to check for hidden faults with diagnostic tools, avoiding unnecessary expensive part replacements.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

How many seats can a B2 license holder drive in a passenger vehicle?

b2 can drive blue-plate minibuses with 9 seats or fewer and a vehicle length under 6 meters. The vehicle types permitted under a B2 license include: 1. Heavy and medium-duty trucks, mostly freight trucks such as dump trucks; 2. Large, heavy, and medium-sized special-purpose vehicles, which refer to vehicles equipped with specialized devices or equipment, such as sprinkler trucks, concrete mixer trucks, and fire trucks. In addition to the above vehicle types, the B2 license also covers all vehicle types permitted under C1, C2, C3, C4, and M licenses, including small and micro passenger vehicles (with a seating capacity of 9 or fewer), three-wheeled vehicles, wheeled self-propelled machinery, and light, small, and micro steering operation vehicles.
10
0
Share

What are the differences between Jaguar XF and XFL?

The differences between Jaguar XF and XFL are: 1. Different maximum horsepower of the engine: The Jaguar XF's engine has a maximum horsepower of 250; The Jaguar XFL's engine has a maximum horsepower of 200. 2. Different maximum torque of the engine: The Jaguar XF's engine has a maximum torque of 365 kilowatts; The Jaguar XFL's engine has a maximum torque of 320 Newton meters. 3. Different dimensions: The Jaguar XF's length, width, and height are 4965mm, 1987mm, and 1496mm respectively, with a wheelbase of 2960mm; The Jaguar XFL's length, width, and height are 5093mm, 1880mm, and 1456mm respectively, with a wheelbase of 3100mm.
7
0
Share

Is the Motorcycle License Test Easy? How Long Does It Take?

Motorcycle license tests are relatively simple, consisting of only three parts: theory, field, and on-road tests, with a very high pass rate. The process is also quick, taking about a month. Below are detailed explanations: 1. Introduction One: The content of Subject One and Subject Four is similar to that of the C-class license. 2. Introduction Two: Subject Two includes slalom, single-plank bridge, and hill start. 3. Introduction Three: Subject Three is completed together with Subject Two, without separate training or testing. 4. Introduction Four: If you only have a C1 driver's license and not a motorcycle license, riding a motorcycle will result in a 12-point deduction from your C1 license, so be very careful.
14
2
Share

Is the Changan Eado Dual Clutch Transmission Dry or Wet?

Changan Eado's dual clutch transmission is wet. Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions mainly consist of gears and shafts, achieving speed and torque variation through different gear combinations; automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic transmission and gear combinations. The Changan Eado is a compact sedan equipped with a 1.6L naturally aspirated engine, delivering a maximum torque of 161 Nm. The vehicle measures 4710mm in length, 1820mm in width, and 1505mm in height, with a wheelbase of 2700mm, and is paired with a 5-speed manual transmission.
19
1
Share

How much tire pressure loss per month is considered normal?

Under normal circumstances, a tire pressure decrease of approximately 0.02 bar per month is considered normal. Tires are the only components of a vehicle that come into contact with the ground, and they are crucial for the driving stability and safety of the vehicle. Tire Pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. Tire pressure is like the blood pressure of a car; the level of tire pressure plays a vital role in the performance and power of the vehicle. Normal Tire Pressure Range: The standard value range for tire pressure varies slightly depending on the vehicle model, as the factory specifications for tire pressure may differ. For example, in the case of passenger cars, the tire pressure should generally be maintained within the range of 2.2 to 2.6 under normal conditions.
10
5
Share

What Causes Difficulty Starting a Hot Engine?

The reasons for difficulty starting a hot engine are: 1. Fuel injector leakage: While normal fuel injection is standard operation, leakage constitutes additional fuel supply. The more severe the injector leakage, the richer the air-fuel mixture becomes, leading to hard starts when the engine is hot; 2. Damaged carbon canister purge valve: Fuel atomization during hot starts is normally adequate without requiring extra vapor. If the carbon canister continuously supplies vapor to the intake, it creates an overly rich mixture; 3. Poor fuel quality; 4. Faulty intake air temperature sensor: This sensor adjusts fuel injection volume. If defective, it causes hot-start difficulties; 5. Engine carbon buildup: Carbon deposits strongly adsorb gasoline. Excessive buildup on intake valves, throttle bodies, or pistons can absorb fuel, creating an overly lean mixture that affects starting.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.