What to do if the chassis of Lynk & Co 03 has been scraped several times?

1 Answers
Jess
07/30/25 2:20am
Try not to drive the car onto the curb, and develop good car usage habits to save money and avoid trouble. Reducing the impact of speed bumps on tires and the vibration amplitude of the vehicle's suspension can make it less likely to hit the chassis. In such cases, slow down and drive carefully. You can adopt the method of driving the vehicle diagonally, that is, letting one front wheel reach the top (or bottom) of the slope first to avoid scraping the undercarriage.
Was this review help?
9
2
Share
More Forum Discussions

Why is the left side always wider when reversing into a parking space to the left?

Left side always being wider when reversing into a parking space to the left is due to steering too quickly or driving too fast. Below are the techniques and precautions for left reverse parking: Techniques for left reverse parking: Observe the position of the left rearview mirror and the parking line. Start turning the steering wheel fully to the left when there is still a small distance between the left rearview mirror and the parking line. Use the left rearview mirror to monitor the position of the car body relative to the left corner of the parking space, predicting whether the car body will cross the line. If continuing to reverse with the current steering angle causes the distance between the car body and the corner to become too narrow, adjust by turning the steering wheel back half a turn to widen the distance, then turn fully to the left again. Precautions for left reverse parking: Control the driving speed, using only first gear or reverse gear at idle speed throughout the process. The driving path mainly depends on the speed of steering wheel rotation and driving speed. When reversing, accurately observe the boundary lines and promptly correct the direction to ensure the car enters the parking space straight.
18
0
Share

What Does Two-Year Interest-Free Car Purchase Mean?

Two-year interest-free car purchase means that when a user finances a car and chooses a two-year loan term, the loan will be interest-free. Upon the expiration of the loan term, the user only needs to repay the principal amount of the loan. Conditions for Applying for an Interest-Free Car Loan: The car buyer must be at least 18 years old, a legal Chinese citizen with valid identification and full civil capacity; the car buyer must have the ability to repay the loan, with a stable job and income; the car buyer must provide proof of fixed and detailed address; the car buyer must have a good personal credit record; hold a car purchase contract or agreement recognized by the lender; meet other conditions stipulated by the lending institution. Documents Required for Applying for an Interest-Free Car Loan: Users who meet the conditions for car loan financing should prepare relevant documents such as ID card, household register, work certificate, income proof, car purchase agreement or contract signed with the dealer, and submit the loan application to the lending institution. The lending institution will then review the loan documents submitted by the car buyer and the buyer's personal credit status. Once approved, the loan contract will be signed, and the loan funds will be disbursed, allowing the car buyer to pick up the vehicle. After obtaining the loan, it is important to make repayments on time.
4
4
Share

Can You Make a U-Turn in a Highway Service Area?

Highway service areas do not allow U-turns. Penalties for making a U-turn on the highway: U-turns are prohibited on the entire highway, regardless of whether it is in a service area. To make a U-turn, you must exit at the next available exit and then turn around. U-turns are not permitted on highways, nor is it possible to make one, as you cannot drive across the median. Instead, you would have to drive in the opposite direction. According to the relevant provisions of the Road Traffic Safety Law, reversing, driving in the opposite direction, or making a U-turn on a highway will not only result in a fine but also a full 12-point deduction from your driver's license. What to do if you miss an exit or take the wrong ramp on the highway: Maintain your speed and continue driving. Do not panic or brake suddenly, as this could lead to rear-end collisions or other accidents. While continuing to drive, look for the nearest exit or service area. Several dozen meters before the exit toll booth, there is usually a designated area for drivers who have taken the wrong route to turn around. From there, you can re-enter the highway. Most service areas are symmetrically designed with a connecting tunnel in the middle. By driving through this tunnel to the opposite service area, you can exit and return to your intended destination. This method helps save on highway tolls, as the extra distance traveled within the highway loop is not charged.
8
4
Share

Why was 5 points deducted for the lighting in Subject 3?

The reason for the 5-point deduction in Subject 3 lighting is not using high beams when driving on roads without illumination or with poor illumination. The following situations result in a 5-point deduction: 1. Horn: Not using the horn reasonably when starting in complex road traffic conditions. 2. Starting: The vehicle jerks when starting. 3. Engine: Improper control of the accelerator pedal during starting, causing the engine speed to be too high. 4. Inspection work:
7
0
Share

What transmission does the BYD Surui use?

BYD Surui uses a 5-speed manual transmission, and this model does not offer an automatic transmission variant. The Surui measures 4680 mm in length, 1765 mm in width, and 1490 mm in height, with a wheelbase of 2660 mm, providing relatively spacious interior room. The Surui is a compact sedan under BYD's lineup, equipped with a 1.5-liter naturally aspirated engine across all variants. This engine delivers 109 horsepower and a maximum torque of 145 Nm, achieving peak power at 5800 rpm and maximum torque at 4800 rpm.
20
2
Share

How Many Retake Opportunities Are There for Subject 2 and Subject 3?

For Subject 2 and Subject 3, each appointment allows one examination attempt. If the examinee fails, they can retake the exam once on the spot. If they choose not to retake or fail the retake, the current examination session ends, and the applicant must rebook the exam after ten days. Within the validity period of the driving skill test permit, the number of appointments for Subject 2 and Subject 3 road driving skill tests must not exceed five. If the fifth attempt is still unsuccessful, the previously passed subjects will be invalidated. Subject 2 is scored out of 100, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The following conditions must be met to pass: ① For large passenger vehicles, trailers, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. Subject 3 is scored out of 100, with a passing score of 90. The test generally includes: vehicle preparation, simulated lighting test, starting, driving straight, gear shifting, changing lanes, pulling over, proceeding straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.