What to Do If the Car Has No Tire Pressure Monitoring?

2 Answers
VanHarrison
07/24/25 10:09am
If the car is not equipped with tire pressure monitoring, it is necessary to add a tire pressure monitoring device to prevent driving with underinflated tires. The specific steps to add a tire pressure monitoring device are as follows: 1. Open the packaging and check if all accessories are complete. Remove the original valve stem and install the sensor. 2. Reinstall the tire and wheel, inflate it, and perform a dynamic balance test on the balancing machine. When the display is first inserted into the cigarette lighter socket, the warning light on the display will turn red for about 2 seconds before turning off. Then, the indicator lights for each tire will cycle through. When the indicator light stays on a specific wheel, it means the current reading displayed is the tire pressure value for that wheel. The continuous cycling display of each tire's pressure value allows for clear monitoring of each tire's pressure condition. If the tire pressure fluctuates significantly, falls below, or exceeds the set pressure value, the warning light will illuminate to alert the driver to check the tire pressure. This small display terminal can also effectively and promptly indicate if the tire temperature is too high or if the battery is low.
Was this review help?
2
0
Share
VonEvan
08/11/25 5:19am
If my car doesn't have a tire pressure monitoring system, I've developed the habit of manual checks to ensure safety - it's simple and worry-free. As a DIY enthusiast, I use a tire pressure gauge to check each tire's pressure monthly when the car is cold. The procedure involves unscrewing each tire's valve cap and pressing the gauge onto the valve stem to get a reading, with the standard values found on the label attached to the door frame. If pressure is low, I drive to a gas station to refill - many places offer this service for free. Before driving, I also visually inspect the tires; if they appear flat or show abnormal wear patterns, I check them immediately. Failing to detect tire pressure issues promptly increases the risk of blowouts and fuel consumption, which wastes money and affects driving stability in the long run. I think installing a tire pressure monitoring system is also a good option - aftermarket systems available online for a few hundred yuan are easy to install yourself. The key is to stick to regular checks and not get lazy. This is how I maintained my old car without a system, and I never had any trouble.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Which Lane to Enter When Turning Right?

When making a right turn, vehicles should generally enter the rightmost motor vehicle lane, accelerate, and then proceed in the designated lane. Right turns should enter the rightmost motor vehicle lane. Which lane to enter when turning right: When making a right turn, vehicles should typically enter the rightmost motor vehicle lane, accelerate, and then proceed in the designated lane. The number of lanes for one-way traffic on the road, whether it's a two-lane or three-lane one-way road, usually does not have a right-turn signal. The rightmost lane is often a shared lane for both right turns and straight-through traffic. Why penalties are issued for right turns: This is a road with both a main lane and an auxiliary lane. Currently driving in the third lane of the main road, there are two auxiliary lanes to the right of the green belt. There is an inverted Y-shaped blue sign on the right pole, with a straight line on the left and a diagonal line on the right. Seeing this sign indicates that vehicles in the right lane may merge into the main road ahead.
4
1
Share

Can someone other than the owner handle the biennial inspection for a new car?

Non-owners can perform the annual inspection. Annual inspection considerations: Bring valid compulsory traffic insurance and the vehicle license, then drive to the inspection station. Before inspection, ensure all traffic violations and accidents involving the vehicle are resolved. If the vehicle type noted on the license is a medium or larger passenger or cargo vehicle, it must be inspected by traffic police at the local vehicle management office before undergoing inspection at the designated station. Small vehicles can be inspected at any station within the city. Inspection process: Fill out the motor vehicle inspection label application form, submit the required documents, and drive the vehicle to the inspection entrance for queuing. When it's your turn, drive the vehicle into the inspection station for on-site testing. After passing the inspection, proceed to the payment window. The inspection report and environmental label with the vehicle license copy stamp can be collected in about 15 minutes.
14
5
Share

Does Applying Car Wrap Require Registration?

Applying transparent or invisible car wrap does not require registration. However, applying color-changing car wrap requires registration at the vehicle management office. Precautions for applying color-changing car wrap: According to the regulations on motor vehicle registration, if the area proportion of the body color change does not exceed 30%, vehicle modification registration is not required. If the color-changing area exceeds 30%, it must be registered at the vehicle management office. Unauthorized changes to the body color, engine, body, or frame will result in a warning or a fine of up to 200 yuan. Invisible car wrap: It involves applying a high-performance, new-type environmentally friendly film (plastic film) to the car body. The materials for invisible car wrap include PU, PVC, TPU, etc. The new generation of invisible car wrap is mainly made of TPU + nano-coating. By applying a protective film with special properties on the paint surface, it protects the paint. Additionally, it adds new features, such as strong toughness, allowing minor scratches and light abrasions to self-repair.
2
4
Share

What Are the Technical Requirements for Transmission Assembly?

Transmission assembly has the following technical requirements: Before removing the transmission from the vehicle: The vehicle must be parked on a flat and safe surface, with the transmission shifted into neutral in the low gear range. The engine must be turned off, and the main power switch must be disconnected. The front wheels should be chocked to ensure safety, which is critically important. Before disassembling the transmission assembly: The transmission housing must be thoroughly cleaned. Disassembly of the transmission must be performed in a clean area to prevent dust or other contaminants from entering the transmission interior, as this can accelerate wear and damage bearings. Special tools should be used for removing bearings, and the disassembled bearings must be carefully cleaned. When disassembling individual sub-assemblies: All components should be placed on a clean workbench in the order of disassembly to prevent loss and facilitate reassembly. Snap rings should be removed using snap ring pliers. During the disassembly process: Care must be taken to control the amount of force applied to components such as shafts or housings. Avoid rough handling to prevent damage. Some components are prohibited from being disassembled, and it is strictly forbidden to apply external force to rotating driven parts.
2
5
Share

What are the symptoms of a faulty Audi headlight control module?

It can cause some electrical components in the car to malfunction, such as headlights, wipers, power windows, door locks, etc. Automotive Headlights: Automotive headlights, also known as front headlights, generally integrate turn signals, low beams, high beams, and position lights; some models also include fog lights and LED light groups. The combination varies by vehicle. Automotive headlights use bulbs such as incandescent bulbs, halogen bulbs, and new high-intensity arc lamps. Classification of Automotive Headlights: Halogen headlights are currently the most commonly used type of headlight source by major automakers in various vehicles. Halogen lights are relatively inexpensive, making them very suitable for lower-priced economy models. Xenon headlights are now widely used in mid-to-high-end vehicles. Due to their high brightness, xenon lights are usually equipped with lenses, which focus the emitted light, making them very popular. The color is also different from ordinary halogen lights, emitting white light. LED headlights are increasingly entering people's sight. When hearing about LEDs, one might think more of beautiful daytime running lights, but this light source, with its many advantages, has become the choice for more and more automotive headlight lighting. Laser headlights use laser diodes as the light-emitting element. As the name suggests, they are closely related to LED diodes and share many similar advantages, such as fast response, energy efficiency, small size, long lifespan, and low brightness attenuation. They have greater advantages over LEDs in terms of energy consumption and size.
1
1
Share

Does modifying the exhaust pipe of a motorcycle affect its power?

Modifying the exhaust pipe of a motorcycle does not affect its power. Internal structure of a motorcycle exhaust pipe: The internal structure of a motorcycle exhaust pipe is a muffler. The motorcycle exhaust pipe mainly uses porous sound-absorbing materials to reduce noise. By fixing the sound-absorbing materials on the inner wall of the airflow channel or arranging them in the pipe in a certain way, a resistive muffler is formed. When sound waves enter the resistive muffler, part of the sound energy is converted into heat energy and dissipated through friction in the pores of the porous material, thereby weakening the sound waves passing through the muffler. Components of a motorcycle: Engine. The engine is a two-stroke or four-stroke gasoline engine, cooled by air, either natural air cooling or forced air cooling. Transmission system. The motorcycle transmission system includes primary reduction, clutch, gearbox, secondary reduction, and other components. Running system: The running system supports the weight of the entire vehicle and its load, ensuring stable handling and comfortable riding. The running system mainly consists of the frame, front fork, front shock absorber, rear shock absorber, wheels, etc. Steering and braking system. The front wheel and handlebars work together to control the direction of the motorcycle. The handlebars are installed on the upper triple clamp, and when the handlebars rotate around the steering stem, the upper and lower triple clamps rotate accordingly, driving the front wheel to turn left or right through the front shock absorber. Generally, the front wheel brake is controlled by the hand brake lever, and the rear wheel brake is operated by the foot brake pedal.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.