What tires does the Honda CR-V use?

3 Answers
SanWillow
07/29/25 7:34am
Honda CR-V uses Michelin Latitude series SUV tires, with the model number 225/60R18. The Honda CR-V is a compact 5-door, 5-seat SUV with body dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, and a wheelbase of 2661mm. The Honda CR-V is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 142 kW and a maximum torque of 243 Nm. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using multi-link independent suspension.
Was this review help?
19
4
Share
VanValeria
08/13/25 1:24am
I've been driving a Honda CRV for several years, and the original tires are usually Bridgestone Dueler H/P Sport or Michelin Primacy Tour, with a size around 225/65R17, which are all-season tires. This design is very suitable for daily commuting and weekend trips, providing a quiet and smooth ride in the city and handling minor bumps in the suburbs. If you notice the tread wearing out quickly after prolonged use, it's important to check them promptly. Generally, measure the tread depth every six months, and it's recommended to replace them with the same original model or a similar one. Keep the tire pressure around 32 psi, as too low pressure can easily increase fuel consumption. Personally, I think the CRV's tires are quite durable and can last up to 50,000 kilometers, but if you occasionally experience slipping on wet or slippery roads, it might be time to replace them. Safety first, don't skimp on costs.
Was this review help?
1
5
Share
Expand All
McBryce
10/04/25 7:49am
When repairing Honda CRVs, owners often complain about tire issues. The factory usually equips them with all-season Bridgestone or Yokohama tires in 225/65R17 size, which offer a balance between wear resistance and grip. Check that the tread depth doesn't fall below 1.6mm, and maintain tire pressure between 32-35 psi. If you feel vibration or pulling while driving, it might indicate tire deformation or imbalance - get wheel balancing done promptly. When replacing tires, opt for low rolling resistance versions like Michelin's energy-saving models to improve fuel efficiency. Regular maintenance helps extend tire life, saving money and hassle.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What does roz/ron90-98 mean?

It represents the gasoline grade, indicating the octane rating range between 90 and 98 can be used. Relevant introductions are as follows: 1. Composition: Gasoline is composed of isooctane and heptane, and the proportion of isooctane is the actual octane rating of the gasoline. For example, the so-called 97-grade gasoline means isooctane accounts for 97% of the fuel composition, and heptane accounts for 3%. 2. RON: The value of RON/ROZ can directly reflect the compression ratio that the gasoline can withstand. When the gasoline quality is good, without impurities and other chemical substances that should not be contained, the RON value of gasoline is the most scientific, accurate, and commonly used standard to reflect the actual performance of gasoline.
7
1
Share

What is the actual fuel consumption of the Buick Envision 1.5t?

The actual fuel consumption of the Buick Envision 1.5t is approximately 8.9 to 11 liters per 100 kilometers. Taking the 2020 Buick Envision 1.5t as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters. The 2020 Buick Envision 1.5t features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with an inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 250nm.
7
0
Share

What are the body dimensions of the Picasso?

The length, width, and height of the Picasso are 4287 mm, 1751 mm, and 1642 mm respectively, with a wheelbase of 2760 mm. Relevant information is as follows: The Picasso is equipped with two engines, one is a 1.6L naturally aspirated engine, and the other is a 2.0L naturally aspirated engine: 1. 2.0L naturally aspirated engine: The 2.0L naturally aspirated engine delivers 135 horsepower and a maximum torque of 190 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4100 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. 1.6L naturally aspirated engine: The 1.6L naturally aspirated engine produces 106 horsepower and a maximum torque of 142 Nm. This engine achieves its maximum power at 5750 rpm and its maximum torque at 4000 rpm. It also employs multi-point fuel injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block.
15
3
Share

What causes the Odyssey to have difficulty accelerating?

The reasons for the Odyssey's acceleration difficulty may include ignition system malfunctions, insufficient fuel injection, excessive engine carbon buildup, fuel system failures, engine system faults, or damage to the catalytic converter/turbocharger. Below are more detailed explanations: Specific causes: 1. Ignition system failure: Components like aging ignition coils or overdue spark plug replacement can cause insufficient ignition energy, poor combustion, weak engine acceleration, and illuminated engine warning lights. 2. Fuel system failure leading to low pressure: Insufficient fuel injection results in poor engine acceleration. 3. Excessive engine carbon buildup: This affects fuel atomization, leading to poor combustion, excessive emissions, and weak acceleration. 4. Engine system faults triggering emergency operation mode: This restricts engine power output, causing acceleration difficulties. Sensor failures (oxygen sensor, air flow meter, crankshaft position sensor, knock sensor, etc.) may trigger this mode. 5. Catalytic converter or turbocharger damage: In such cases, visit a repair facility for computer diagnostics to identify trouble codes and resolve the issue accordingly.
10
1
Share

Does engine oil become thinner or thicker with use?

With prolonged use, engine oil tends to become thicker. Here are the reasons for oil thickening: Changes in viscosity modifiers: Most engine oils contain viscosity index improvers. During extended operation, these viscosity modifiers can be sheared, losing their original viscosity and causing the oil's viscosity to decrease to some extent. Oxidation: Engine oil undergoes oxidation within the engine, leading to thickening. Other contaminants: The engine generates significant sludge and impurities during operation, which are dispersed in the oil by detergents and dispersants, resulting in increased viscosity.
7
2
Share

What cleaning agent is used for engine oil stains?

Engine oil stains can be cleaned with organic solvent cleaning agents. Engine oil is the lubricating oil used in engines. It consists of base oil and additives. The density of engine oil is approximately 0.91×10 cubic (kg/m3), and it serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is hailed as the "blood" of automobiles. Below is relevant information about using organic solvent cleaning agents to clean engine oil stains: Composition: Engine oil is a mixture of several hydrocarbons and is an organic substance. Principle: It can dissolve engine oil based on the principle of like dissolves like.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.