···
Log in / Register

What time should I arrive at the test center for the morning session of Subject 1?

3 Answers
EleanorMarie
09/04/25 3:16am
Subject 1 exam, the first session starts at 9:00 AM. Here are the details: Subject 1: There are two morning sessions, the first session starts at 9:00 AM, and the second at 10:00 AM. There are three afternoon sessions at 1:00 PM, 2:00 PM, and 3:00 PM. The exam duration is limited to 45 minutes. Since information registration is required before entering the exam room, it is best to arrive half an hour early. Information registration: Before taking the Subject 1 exam, you need to complete information registration, after which staff will call names in batches to enter the exam room. Generally, as long as you can enter the test center and take the exam before the end of the day, it will not be invalid. Unless under special circumstances, it is best to attend the exam on time.
Was this review help?
17
1
Share
Natasha
09/16/25 4:27am
That day I went to take the morning session of the Subject 1 test, and the admission ticket stated that the exam would start at 9:00. I deliberately set off an hour and a half earlier. However, I waited 20 minutes for the bus on the way, the test center was in the suburbs, and the navigation took a detour. Fortunately, I arrived at the test center gate by 7:30, only to see the queue already stretching to the roadside. After queuing for security checks, storing my bag, and swiping my ID card, it was already 8:30 by the time I entered the waiting room. I suggest everyone calculate the time in advance based on traffic conditions, especially those living far away should avoid the morning rush hour. Don’t forget to bring your ID card. There are copy shops at the entrance, but making last-minute copies wastes time and affects your mindset, so it’s better to prepare everything the night before. The test center rules say that entry stops 30 minutes after the exam starts, but many people arrive early to secure a spot. It’s always safer to be early rather than late.
Was this review help?
3
2
Share
Expand All
Kathryn
10/30/25 5:01am
I'm someone who prefers to act in advance. For the morning session of the driving theory test, I set my alarm for 6 a.m. After getting ready and having breakfast, I left home at 7 a.m. and arrived at the test center before 8 a.m. While queuing, I noticed many people rushing in at 8:40 a.m., only to get stuck at the fingerprint verification stage, panicking. In fact, the system assigns test batches based on check-in order—arriving early means testing early, avoiding later system lags. Additionally, there are water dispensers and restrooms at the test center entrance, so arriving early to familiarize yourself with the environment can ease nerves. I recommend bringing a transparent folder for your ID and avoiding clothes with metal accessories to save two or three minutes during security checks. Double your estimated travel time, and bus riders should check the early bus schedule.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

Can a lost license plate be reissued in a different location?

If a vehicle license plate is lost in a different location, it cannot be reissued there. The reissuance must be processed at the vehicle management office of the registration location. According to Article 44 of the "Motor Vehicle Registration Regulations": If a motor vehicle license plate or registration certificate is lost, missing, or damaged, the owner of the motor vehicle must apply for a replacement at the vehicle management office of the registration location. When applying, the owner must fill out an application form and submit proof of identity. Below are the required materials for authorizing someone to reissue the license plate: 1. Original and copy of the motor vehicle owner's identity proof; 2. Original and copy of the motor vehicle registration certificate; 3. Original and copy of the agent's identity proof, and a written authorization from the motor vehicle owner.
20
3
Share

How often should the Elantra's spark plugs be replaced?

The Elantra's spark plugs should be replaced every 100,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has an insulator skirt that is reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burning. If the spark plugs are covered in oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected for the spark plugs, the air-fuel mixture is too rich, or there is oil leakage.
3
2
Share

Does Applying Side Decals Affect Vehicle Inspection?

If the decals cover more than 10% of the vehicle's body area, you only need to file for a record at the relevant authorities, which will not affect the annual inspection. However, if you fail to file for a record, it will affect the annual inspection. Additional Information: 1. You need to file for a record at the local vehicle management office and then update the photo on your vehicle registration certificate. This will ensure that the annual inspection is not affected. If you do not file for a record, it will impact the inspection, and you may also face penalties from traffic police while driving. 2. The annual inspection includes a check of the vehicle's exterior. If the exterior has been modified, it may not pass the inspection. During the inspection, the vehicle must go through a testing line equipped with professional devices and staff. 3. The annual inspection involves checking the vehicle's exterior, exhaust emissions, lighting system, braking system, and chassis. Components such as brake lights, turn signals, and reverse lights are prone to malfunction.
13
5
Share

What is the emission standard for cars in 2006?

2006 cars could meet either China II or China III emission standards. Here are the relevant details: 1. China II: The abbreviation for the National Phase II emission standard, equivalent to Euro II standards, meaning the exhaust pollutant levels match Euro II requirements. 2. Regulation: According to the State Environmental Protection Administration's "Announcement on Implementing National Phase II Motor Vehicle Emission Standards," starting from September 1, 2003, all newly designed heavy-duty vehicles were required to comply with National Phase II type-approval emission limits equivalent to Euro 2 standards.
13
4
Share

What does the hold button in the car mean?

The hold button on the vehicle means hold. After pressing the hold button, the automatic transmission is in hold mode, and the hold mode indicator light on the dashboard lights up. The hold button adjusts the optimal driving state according to different driving conditions, effectively preventing the transmission from shifting frequently, and plays the role of forced downshifting and not upshifting when overtaking. The situations for using the hold button are: 1. When starting on snow, place the gear lever in the 2nd gear position and press the hold button, the transmission will maintain the gear ratio at 2nd gear, making the start smoother; 2. When driving on continuous curves, press the hold button in D4 gear, the transmission will maintain 3rd gear, which can continuously output greater torque, improve acceleration performance, and make driving smoother; 3. When driving on mountain roads or continuous slopes, press the hold button in D4 or 2nd gear to enter hold mode, making acceleration more powerful when going uphill and providing greater resistance and safety when going downhill, avoiding wear caused by frequent shifting of the transmission.
20
3
Share

How Long to Wait Before Rescheduling After Failing Subject 3

Subject 3 exam retakes can be scheduled 10 days after a failed attempt. Below are key details about Subject 3 testing: 1. Test components: Vehicle preparation, lighting simulation test, starting off, straight-line driving, gear shifting operations, lane changing, roadside parking, proceeding straight through intersections, left/right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, oncoming vehicle handling, overtaking, U-turns, and nighttime driving. 2. Retake policy: According to China's driver's license regulations, candidates have five total attempts for Subject 3. Failure to pass after five attempts invalidates all previous test results, requiring complete re-registration starting from Subject 1.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.