What time is the second session of Subject 1 reservation?

How to Open the Front Hood of a Volkswagen?

To open the engine hood of a Volkswagen, follow these steps: 1. Locate the switch in the lower left corner of the driver's seat and press it. 2. Lift the engine hood and open it. 3. Remove the hood support rod from its fixed bracket. 4. Finally, hook the hood support rod into the groove on the engine hood. To close the engine hood: 1. Hook the hood support rod into the opening and press it into its fixed bracket. 2. Gently lower the engine hood to a lower position. 3. Release it to allow the hood to fall into the locking mechanism. Important notes: 1. Do not open the engine hood if steam or coolant is leaking from the engine compartment. Wait until there is no steam, smoke, or coolant leakage, and the engine has cooled down before opening the hood. 2. After closing the hood, check to ensure it is properly secured. The closed hood should be flush with the adjacent body panels. 3. To avoid damaging the engine hood and windshield wiper arms, only open the engine hood when the windshield wipers are folded.

15

3

Share

What engine does the Landwind X7 use?

Landwind X7 uses the engine model JX4G15B5L, with a maximum horsepower of 163 hp, a maximum power of 120 KW, a maximum power speed of 5400-5700 rpm, and a peak torque of 250 Nm. The engine of the Landwind X7 is manufactured by Shenyang Aerospace Mitsubishi. Shenyang Aerospace Mitsubishi Automobile Engine Manufacturing Co., Ltd. is a Sino-foreign joint venture established by five companies from China, Japan, and Malaysia in August 1997. For daily maintenance of the Landwind X7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine works properly but also extends the overall lifespan of the radiator and engine.

10

2

Share

How to Open the Fuel Tank Cap on the Buick Envision?

To open the fuel tank cap on the Buick Envision, follow these steps: shift to P (Park) gear, then press the fuel tank cap from the outside to open it. Below is some relevant information about fuel tanks: 1. Fuel tanks can be divided into two types: open fuel tanks and closed fuel tanks. 2. Open fuel tank: The liquid surface in the tank is in contact with the atmosphere, and an air filter is installed on the fuel tank cap. Open fuel tanks have a simple structure and are easy to install and maintain, making them commonly used in hydraulic systems. 3. Closed fuel tank: Generally used for pressurized fuel tanks, filled with a certain pressure of inert gas, with a charging pressure of up to 0.05MPa. 4. Based on shape, fuel tanks can also be categorized into rectangular fuel tanks and cylindrical fuel tanks. 5. Rectangular fuel tanks are easy to manufacture and convenient for placing hydraulic components, hence widely adopted; cylindrical fuel tanks have high strength, are lightweight, and easy to clean, but are more difficult to manufacture and occupy more space, often used in large metallurgical equipment.

4

1

Share

Does the Kia K3 come with a sunroof?

The base model of the Kia K3 does not have a sunroof; only the mid and high-end models are equipped with one. The car sunroof is installed on the roof, effectively facilitating air circulation inside the vehicle, increasing the intake of fresh air, and achieving the purpose of ventilation. During the rainy and humid seasons of summer and autumn, drivers only need to open the sunroof to the rear-tilt ventilation position to easily eliminate fog on the windshield, ensuring driving safety. Here are some related details: 1. The Kia K3 is a compact car under Dongfeng Yueda Kia, with dimensions of 4600mm in length, 1780mm in width, 1445mm in height, and a wheelbase of 2700mm. 2. The Kia K3 is equipped with intelligent driving systems such as FCA (Forward Collision-Avoidance Assist), LDW (Lane Departure Warning), LKA (Lane Keeping Assist), DAW (Driver Attention Warning), HBA (High Beam Assist), and BCW (Blind Spot Collision Warning).

4

Share

What Are the Symptoms of Low Transmission Fluid?

The symptoms of low transmission fluid include: reduced lubrication effectiveness, decreased cooling performance, and lower transmission efficiency. Detailed explanations of the symptoms of low transmission fluid are as follows: 1. With insufficient transmission fluid, lubrication effectiveness decreases, leading to abnormal noises in the transmission, difficulty in gear shifting, accelerated wear of components, and increased susceptibility to damage. 2. Low transmission fluid results in reduced cooling performance, causing the internal temperature of the transmission to rise. In severe cases, this can burn out internal transmission components, rendering the transmission unusable. 3. Insufficient transmission fluid lowers transmission efficiency, causing sluggish gear shifts, slower vehicle acceleration, weak starts, and increased fuel consumption.

15

4

Share

What is the battery model for the Audi A3 car key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F replacing it if it is square; 20 indicates that the battery has a diameter of 20mm; 32 represents a battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan can be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, free from moisture and other interferences), its lifespan can be further extended to 8 years or even 10 years. The usage time of a vehicle remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter its lifespan will be. If the remote key battery runs out of power, the mechanical key can be used directly to open the vehicle. Car remote keys use button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each case, car owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of car key remotes is very high, making it one of the most common remote batteries. The voltage of this battery is 3V, while most car key batteries are powered by 9V, so three batteries need to be replaced each time. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016. However, some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is lithium metal, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium-manganese button battery.

6

4

Share

What time is the second session of Subject 1 reservation?

How to Open the Front Hood of a Volkswagen?

What engine does the Landwind X7 use?

How to Open the Fuel Tank Cap on the Buick Envision?

Does the Kia K3 come with a sunroof?

What Are the Symptoms of Low Transmission Fluid?

What is the battery model for the Audi A3 car key?

What are the body dimensions of the Volkswagen Touran?

What is the Chinese name of Peugeot DS?

Which country's brand is Lynk & Co?

Where is the cabin air filter located on the Dongfeng Peugeot 308?