What time does the first session of Subject 3 start in the morning?

1 Answers
McBeckett
07/30/25 7:57am
Subject 3 morning first session starts at 8:30. Below is relevant information about the Subject 3 exam: 1. Exam regulations: The specific subjects of the Subject 3 exam are road driving skills and safe civilized driving knowledge test, with full scores of 100 points each. A score of 90 or above in each subject is required to pass. 2. Study hour requirements: Subject 3 requires a total of 40 study hours, including 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical operation. According to the teaching syllabus, driving practice hours are recorded cumulatively, with each student allowed to log a maximum of 4 study hours per day.
Was this review help?
12
4
Share
More Forum Discussions

Do small cars need to warm up in winter?

Small cars need to warm up in winter. Not warming up the car can cause damage to the vehicle: it leads to engine wear as the engine oil settles at the bottom when the car is cold, leaving the engine internals in a state of dry friction. The method to warm up the car is: after starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature before driving. The benefits of warming up the car are: 1. After the car has been parked for a long time, the engine oil flows back into the oil pan, leaving the upper part of the engine lacking lubrication; warming up helps lubricate it. 2. When the engine has not reached its operating temperature, the fuel system cannot effectively vaporize gasoline completely due to the low temperature; warming up improves efficiency. 3. It helps the transmission gear oil to lubricate the upper part of the transmission.
7
4
Share

How to Adjust the Height of the Seat Belt in a Fit?

To adjust the height of the seat belt in a Fit: 1. Locate the seat belt anchor point at the upper exit of the seat belt near the side of the driver's seat backrest. 2. Press or pull outward the lock button on it. 3. Slide it up or down to adjust the seat belt to a suitable height. The correct way to use a seat belt: Pull out the seat belt and fasten the buckle tongue into the buckle, ensuring the belt secures your body. Adjust the lap belt position so it rests across your hips, and adjust the shoulder belt so it crosses diagonally over your collarbone. Before driving, check that the seat belt is securely fastened and functioning properly. To release the seat belt, hold the buckle tongue, press the release button, and allow the belt to retract into the retractor. Store the buckle tongue in its designated position.
6
1
Share

Where is Conways tires produced?

Conways tires are produced by Shandong Haohua Tire Company. Below are some relevant tips for selecting tires: 1. Consider original equipment tires: Original tires are the most compatible with the vehicle's speed and maximum load capacity, so theoretically, they should be prioritized when replacing tires. 2. Pay attention to tire tread patterns: The tread patterns on car tires not only enhance aesthetics but also significantly impact tire performance. For vehicles frequently driven in Shenzhen, it's advisable to choose tires with better drainage patterns, such as those with regular small block patterns; while for off-road and long-distance driving, large block patterns may be more suitable. 3. Avoid mixing different types of tires: When selecting tires, it's crucial not to mix different types of tires. For example, avoid combining tires suitable for off-road vehicles with those for regular cars, or mixing directional sports car tires with standard tires.
20
3
Share

Can Windshield Washer Fluid Be Added to Antifreeze?

Windshield washer fluid cannot be added to antifreeze. The effects of adding windshield washer fluid to antifreeze include: 1. Lowering the boiling point of the antifreeze; 2. Causing the engine to overheat and increasing the freezing point of the antifreeze. The method for replacing antifreeze is: 1. Open the vehicle's engine hood, and locate the coolant reservoir in the upper right corner; 2. Open the antifreeze drain plug under the radiator to drain the old antifreeze; 3. Add new antifreeze, tighten the cap, and the antifreeze replacement is complete. Precautions for using antifreeze: 1. The antifreeze level should be checked regularly, and replenished promptly if it falls below the minimum mark; 2. Observe whether the antifreeze has any turbid sediment, and replace it promptly if there is; 3. Different vehicle models use antifreeze of different colors, and they should not be mixed; 4. Before winter, measure the freezing point of the antifreeze to prevent it from freezing.
9
0
Share

Have all the issues with the Land Rover P400e been resolved?

Land Rover P400e issues have been confirmed for recall, with further communication between the manufacturer and consumers. Below is relevant information about Land Rover: 1. Introduction: Land Rover is a British all-terrain vehicle and sport utility vehicle brand, under Jaguar Land Rover, currently offering the Range Rover series, Discovery series, and Defender series. Land Rover was introduced in 1948 as a pioneer in civilian all-terrain special vehicles and was the first car in the world to successfully traverse the notoriously challenging jungles of Central America. Initially named after a single model by the Rover Car Company, Land Rover gradually evolved into a brand. 2. Brand Logo: Rover is a Nordic ethnic group. Since the Rover people were a brave and warlike pirate nation, the Rover car emblem features a Viking ship with red sails, symbolizing the company's fearless spirit of braving the wind and waves and being invincible. Land-Rover is a globally renowned off-road vehicle, and its logo is simply the English words: LAND-ROVER.
13
1
Share

Does Cruise Control Affect the Car?

Cruise control does not affect the car, but it should be installed at a reputable place to ensure the wiring is correct. The components of a cruise control system include: 1. Switch buttons; 2. Dashboard indicator lights; 3. Engine Control Module (ECM); 4. Electronic throttle; 5. Clutch pedal switch; 6. Brake switch and parking brake switch. The function of cruise control is to automatically maintain the vehicle speed without pressing the accelerator pedal, allowing the car to drive at a fixed speed. The methods to turn off cruise control are: 1. Press the brake pedal or clutch pedal to temporarily deactivate it; 2. Press the OFF switch to turn it off; 3. If the speed decreases by 13 km/h relative to the set speed, the cruise control will automatically cancel; 4. Moving the gear selector to the N (neutral) position will cancel cruise control, and the SET indicator light will turn off.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.