What suspension does the Envision use?

1 Answers
StDonovan
07/30/25 4:58am
The Envision adopts MacPherson independent suspension at the front and multi-link independent suspension at the rear. The front and rear brake types are ventilated disc and disc respectively, with an electronic parking brake system. Positioned as a midsize SUV, the Envision is a joint-venture vehicle introduced and manufactured by SAIC-GM Buick. The Buick Envision is available in both China V and China VI emission standards, with two-wheel drive and four-wheel drive variants. The Envision measures 4,686 mm in length, 1,839 mm in width, and 1,691 mm in height, with a wheelbase of 2,750 mm. It is powered by either a 1.5T or 2.0T engine, paired with either a 7-speed dual-clutch transmission or a 9-speed automatic manual transmission.
Was this review help?
14
5
Share
More Forum Discussions

What is the tire model of the Baojun 560?

The tire model and size of the Baojun 560 is 215/60R17. Here is more information: 1. Different vehicle configurations come with different tire brands. The high-end version of the Baojun 560 uses Continental CPC5 series tires with a size of 215/60R17, and the spare tire is also of the same size. The low-end version uses Giti brand tires but maintains the same size. 2. Tire codes. The international standard tire code represents the section width and aspect ratio in millimeters, followed by the tire type code, rim diameter, load index, and speed rating. 3. Points to note when purchasing new tires. When buying new tires, ensure that the size, load range, speed rating, and construction type match those of the original tires. Under normal use, the vehicle's performance will remain the same after replacing the tires. It is also recommended to replace all four tires at the same time to ensure optimal braking and handling performance.
17
1
Share

Can I Go to the DMV to Choose a License Plate After Successfully Selecting One Online?

After successfully selecting a license plate online, you cannot go to the DMV to choose another one. Here are the specific details about online license plate selection: Prepare in advance: First, in areas with license plate restrictions, ensure you have obtained the quota. Schedule an online license plate selection via the online DMV or the DMV customer service hotline, and the online selection can only be done within one day before the scheduled service date. Second, prepare the vehicle's certificate of conformity in advance, as you will need to enter the vehicle's VIN or the certificate number, or the import goods certificate number during the process. Visit the DMV to complete the process: After completing the selection, the system will prompt you to register at the DMV within the specified time. Otherwise, the selected license plate will become invalid, and you will not be able to select a license plate online again for two years.
19
0
Share

Reasons for Three Windows Not Moving in Old Accord Power Windows

Below are the relevant reasons: 1. Disable Switch: If only the driver's door window can move while the other three doors' windows cannot, this is due to the disable switch being activated on the driver's door main control panel. To prevent the driver from controlling the vehicle's windows, there is a separate switch on the driver's main control panel that can disable the window switch functions for the other three doors. When this switch is turned on, the other three doors' windows become uncontrollable. Therefore, it is recommended to first check whether this switch on the main control panel is in the activated state. 2. Check Fuses: Inspect the fuse box located below the driver's compartment. Each of the four doors has a separate fuse. If the fuses are normal and there is no short circuit in the wiring, then the main power window switch is likely faulty. Replacing the main power window switch can resolve the issue. Alternatively, directly supplying power to the positive terminals of the fuses for the other three doors can also allow normal window operation.
14
3
Share

What are the reasons for the black screen failure of the Audi Q3 display?

The reasons for the black screen of the Audi Q3 are as follows: 1. Power supply failure: The car display screen may not light up due to power supply issues, third-party software incompatibility with the system, or outdated software versions causing system failure and inability to display properly, or screen damage. 2. Aging wiring: Prolonged use may lead to black screens caused by aging wiring. If there is no image but sound remains, it might be due to a loose power plug of the navigation display; if there is no sound or image at all, the DVD player might be faulty. 3. Battery failure: Severe battery depletion could prevent the vehicle's electrical equipment from functioning properly. 4. Cable failure: If there is power but the screen remains black, it might be due to damage to the car navigation cable. Over time, many cables may show signs of aging.
1
5
Share

Can I Switch Back to a Fuel Vehicle After Using a Tianjin Fuel Vehicle Quota to Purchase a New Energy Vehicle?

Although fuel vehicle quotas allow for bidirectional purchases, they are not entirely unrestricted. The quota type needs to be changed according to the energy type. Similarly, after converting to a new energy vehicle quota, reverting back also requires procedures. The traffic management department's response is: Before scrapping or transferring the vehicle, you need to register the quota change at the vehicle management office. Only after the vehicle is disposed of can the quota be changed back to a bidirectional fuel vehicle quota. Here is supplementary information: 1. The nature of the fuel vehicle quota remains unchanged. Even if you currently purchase a new energy vehicle, you can still free up the quota to buy a fuel vehicle in the future if you no longer want the new energy vehicle. 2. If possible, apply for a new energy vehicle quota separately, as Tianjin may soon require a lottery for new energy vehicle quotas.
19
5
Share

Which button unlocks the trunk in an automatic transmission car?

To unlock the trunk in an automatic transmission car, press the switch located at the lower left side of the driver's seat. Here are detailed introductions to car trunk switches: Remote key fob: The external method to open the trunk is via the remote key. Simply press the raised car trunk icon button on the key fob to open it. Some car models may not have a dedicated trunk button on the key fob - pressing the unlock button will open the trunk instead. Interior control switches: In-car trunk controls include button-type and lever-type. The button position may vary depending on manufacturers and models, typically located on the left side of the steering wheel or central control area. For example, the Sagitar's trunk button is usually on the door. Some models use a lever instead of a button, mostly positioned at the lower left side of the driver's seat or steering wheel.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.