What suspension does the domestic Ford Explorer use?

What does AT transmission mean?

AT transmission refers to the hydraulic automatic transmission in a car. Here are the specific details about AT transmission: 1. Structure: AT transmission is an automatic transmission. Some AT transmissions have a manual mode, while others do not. Tiptronic refers to a certain type of automatic transmission with manual shifting, which describes a structural form of the transmission. 2. Working principle: AT transmission is a relatively common automatic transmission with many planetary gears inside, relying on planetary gears for speed and torque variation. The AT transmission is connected to the engine via a torque converter. This type of transmission offers smooth shifting and high reliability and durability.

17

4

Share

How to Turn on Car Air Conditioning in Summer?

Car air conditioning systems are devices designed to cool, heat, ventilate, and purify the air inside the vehicle. Below are the specific steps to turn on car air conditioning in summer: 1. Start the engine: Press the brake pedal and start the engine. Turn the key to the ST position to start the engine until the idle speed stabilizes. 2. Adjust the knob: Turn the fan speed knob to the far right for maximum airflow. Rotate the temperature control knob to the left to activate the cooling mode. 3. Press the A/C button: Press the A/C switch to turn on the compressor. Press the recirculation button to activate the interior air recirculation mode.

12

2

Share

How to Deal with EBD Malfunction?

ebd light on, indicating a problem with the electronic brake force distribution control system, avoid sudden braking, and go to a 4s shop or repair shop for inspection as soon as possible. The following is a specific introduction to the car ebd system: 1. The reason why the ebd indicator light is on: If the ebd light is on, it is most likely caused by sensors and fuses. After the ebd light is on, the driver may not feel obvious influence, but as an important part of the braking system, it is recommended that the owner deal with it as soon as possible. 2. Function: Vehicles equipped with the ebd system will automatically detect the adhesion between each wheel and the ground, and appropriately distribute the force generated by the braking system to the four wheels. With the assistance of the ebd system, the braking force can achieve the best efficiency, significantly shorten the braking distance, maintain the stability of the vehicle during braking, and improve driving safety. The ebd system also has the function of maintaining vehicle stability when braking in curves, increasing the safety of driving in curves.

13

3

Share

Is coolant the same as antifreeze?

Coolant is antifreeze. There are scale marks inside the coolant reservoir. If the level is below the mark, you can add antifreeze; if it's above the mark, no addition is needed. Below are the functions of antifreeze: 1. Corrosion prevention: Antifreeze does not cause corrosion to the engine cooling system and also has anti-corrosion and rust removal functions. 2. Boil-over prevention: The boiling point of water is 100°C, while high-quality antifreeze coolant typically has a boiling point above 110°C, preventing boil-over during summer use. 3. Scale removal: High-quality antifreeze is made with distilled water and contains anti-scaling additives, which not only prevent scale buildup but also have descaling functions.

1

4

Share

Can You Continue Using a Tire with a Nail Puncture If It's Not Leaking Air?

Tires with nail punctures that are not leaking air can still be used. Below are specific details about when to replace car tires: 1. Replacement timing depends on the situation: For drivers with good driving habits, tires typically need replacement every 3-5 years or after driving 60,000-80,000 kilometers. If driving conditions are more severe, such as frequent travel on gravel roads or in stop-and-go traffic with sudden braking and sharp turns, the replacement interval will be shorter. 2. Tire aging time: The main material of tires is rubber, which naturally ages over time. Signs of aging include hardening of the tire and small cracks appearing on the sidewalls. Generally, natural aging occurs within 4-5 years. Tires that have been in use for 5 years should be replaced promptly to avoid the risk of blowouts. 3. Observe tire wear: If the tire tread is severely worn and the tread pattern is level with the wear indicators, the tire should be replaced. Otherwise, braking on wet or slippery roads will be more difficult, increasing the risk of losing control of the vehicle. Additionally, driving on rough surfaces with excessively worn tires can lead to blowouts.

17

1

Share

What does dual mean in car air conditioning?

In car air conditioning, 'dual' refers to the zone control button for dual-zone air conditioning. Pressing the dual button allows for independent adjustment of the temperature for either the driver's seat or the front passenger seat. When the dual button's indicator light is on, you can set the air conditioning temperature for the driver and front passenger seat areas separately. After adjusting to the desired temperature, turning off this button will make the automatic air conditioning system regulate the temperature of the respective seats according to the set values. Below is a detailed introduction to dual-zone air conditioning: 1. Concept: Dual-zone air conditioning refers to the ability to independently adjust the temperature in different zones within a car cabin. For example, dual-zone air conditioning means the temperature on the left and right sides of the car can be adjusted independently; four-zone air conditioning means the temperature in the front and rear rows, as well as the left and right sides, can be adjusted separately, meaning there are four zones where the temperature can be independently controlled. 2. Principle: Air conditioning zoning is based on load analysis, dividing the entire air conditioning area into several temperature control zones according to the differences in air conditioning load. 3. Purpose: The goal of air conditioning zoning is to enable the air conditioning system to effectively track load changes, improve the indoor thermal environment, and reduce air conditioning energy consumption.

9

0

Share

What suspension does the domestic Ford Explorer use?

What does AT transmission mean?

How to Turn on Car Air Conditioning in Summer?

How to Deal with EBD Malfunction?

Is coolant the same as antifreeze?

Can You Continue Using a Tire with a Nail Puncture If It's Not Leaking Air?

What does dual mean in car air conditioning?

What does the mode mean in an automatic transmission car?

What Lights Should Be Turned On Before Entering a Tunnel?

What Causes the Skid Light to Illuminate and How to Address It?

How Often Should a Car's Oil Filter Be Replaced?