···
Log in / Register

What Should Novice Drivers Pay Attention to When Driving?

4 Answers
VonCole
07/30/25 2:20am

Novice drivers should pay attention to not driving too fast, using turn signals, and maintaining a safe following distance. Here are the specific precautions to note: Not Driving Too Fast: The speed should not be too fast or too slow; maintaining a speed between 30 to 50 is ideal. If driving too fast, novice drivers may not react quickly enough and may struggle to adapt immediately. Turn Signals: It is essential to learn how to use turn signals proficiently. Remember to signal in advance when turning or changing lanes, letting the vehicles behind know, and only turn the steering wheel after confirming it is safe. Following Distance: Always remember to maintain a sufficient safe distance when driving. Do not follow too closely when there is a vehicle in front, and avoid suddenly slowing down or braking hard when there is a vehicle behind.

Was this review help?
6
3
Share
StDakota
08/15/25 8:26am

When I first started learning to drive, I paid special attention to not letting my guard down on safety. The first thing I did when getting in the car was fastening the seatbelt, keeping the speed within the limit, especially in urban areas to avoid speeding, giving myself enough reaction time. Maintaining a safe distance is crucial, doubling it on rainy days to prevent skidding. When practicing parking, try parallel parking and reversing into a garage multiple times, as beginners often get the direction wrong—find an empty lot to practice slowly. Don’t forget to check the rearview mirrors and blind spots, and signal early before turning to let other drivers know your intentions. Avoid driving during rush hour to reduce stress, and remember to turn on the headlights when driving at night. Mentally, don’t rush—it’s normal to feel nervous on your first drive; if you make a mistake, take a deep breath and keep going. Regularly check the tires and brake system to keep the car in good condition for a more confident drive. Practice more and gain experience gradually, but never push yourself to speed or rush.

Was this review help?
20
4
Share
Expand All
Wilma
10/21/25 5:44am

Driving safety is the top priority. Before starting the car each time, make sure the doors are locked and seat belts are securely fastened. Slow down, especially on unfamiliar roads—don't rush. Be extra cautious in rain or snow as tires can easily lose traction. Maintain at least a three-second following distance and use mirrors to monitor vehicles behind you to avoid rear-end collisions. New drivers should avoid distractions like using phones—stay focused on traffic signals and pedestrians crossing. Start with simple routes, like quiet streets near home, before attempting highways. Obey traffic rules—always stop at stop signs without hesitation. Keep an emergency kit in the car for flat tires or accidents. If tired, pull over to rest—fatigued driving is dangerous. Protect yourself and don't endanger others—building safe habits is a gradual process.

Was this review help?
13
2
Share
Expand All
DiColin
12/04/25 6:10am

New drivers, don't panic—start with the basics. First, master steady speed control in straight-line driving, avoiding sudden acceleration or braking. Signal early when turning and check blind spots to prevent collisions. Take your time with parking; practice reverse and parallel parking more. Speed control is crucial—reduce by 20% in rain to prevent skidding. Constantly scan surroundings via mirrors, especially when changing lanes. Avoid peak-hour routes to reduce stress, and use headlights at night for visibility. No phone distractions—stay focused on road conditions. Don't get discouraged by mistakes; consider a coach or class to refine skills. Regular car checks prevent unexpected breakdowns—practice builds instinctive habits.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

What lights should you turn on when driving in a heavy rainstorm?

When driving in heavy rain, turn on the headlights or front fog lights. Precautions for driving in rainy weather are as follows: 1. Turn on the wipers promptly; 2. If there is frost on the windshield, turn on the air conditioning and direct the cold air toward the windshield; 3. The driver should hold the steering wheel with both hands to maintain straight and low-speed driving, and brake gently to prevent the tires from locking up and causing the vehicle to skid; 4. Reduce the vehicle's speed, pay attention to the distance between the front and rear vehicles, and be mentally prepared to take emergency measures in advance. Car headlights, also known as car front lights or LED daytime running lights, should be maintained by: 1. Regularly checking the sealing of the headlights—if the sealing ring between the lens and reflector is damaged, replace it promptly; 2. Regularly cleaning the reflector—if it turns black and the brightness decreases, replace it; 3. Regularly removing dust and stains from the bulbs.
3
3
Share

What Causes Rough Gear Shifting in Automatic Transmissions?

Rough gear shifting in automatic transmissions may be caused by: transmission clutch pressure leakage; obstructed or sluggish transmission oil passages; insufficient or excessive transmission fluid levels; or damaged solenoid valves. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, transmissions with more gears tend to be more fuel-efficient. Below is relevant information: 1. Damaged solenoid valves: If sludge circulates within the transmission fluid and blocks the oil passages in the valve body, it can cause rough shifting. Over time, this can lead to a series of transmission issues such as overheating, impact, and slipping. 2. Incorrect transmission fluid levels: Verify whether the transmission fluid is at the standard level. Both insufficient and excessive transmission fluid can cause this issue. For vehicles equipped with a transmission dipstick, check whether the fluid level is within the standard range when the engine is running.
5
1
Share

Symptoms of a Faulty Thermostat in Jetta?

Jetta thermostat failure symptoms are as follows: 1. Thermostat malfunction with insufficient opening affects the engine's large and small circulation cycles, preventing effective heat dissipation and causing engine coolant temperature to rise; 2. Excessive thermostat opening leads to low engine coolant temperature, slow temperature rise, increased fuel consumption, and abnormal engine noises; 3. Thermostat sticking tends to cause carbon buildup, resulting in unstable engine idle speed and engine vibration. Below is how the thermostat works: 1. The thermostat is a valve controlling coolant flow path. It's an automatic temperature-regulating device typically containing temperature-sensing components that open/close air, gas or liquid flow through thermal expansion/contraction. 2. At normal temperature, the wax remains solid. When water temperature is below 76°C, the main valve closes completely while the bypass valve opens fully, allowing water from the cylinder head to directly enter the water pump via the bypass pipe (called small circulation). As water only flows between pump and water jacket without passing through the radiator and with small flow rate, the cooling intensity is weak.
14
3
Share

What Causes the Noise When Shifting Gears in an Automatic Transmission?

The reasons for noise when shifting gears in an automatic transmission are as follows: 1. Large valve clearance when the engine is cold: Poor lubrication can cause noise during gear shifting between cold and warm engine states, lasting about 3 minutes, but this is a normal phenomenon. 2. Issues caused by parking on a slope: If you engage the P (Park) gear before applying the handbrake when parking on a slope, the vehicle's weight will be entirely on the P gear due to inertia, leading to noise when shifting gears. However, if you apply the handbrake first, the handbrake will bear the weight, and no noise will occur. 3. Transmission problems: Wear and tear in the transmission, such as a loose driveshaft, worn differential, worn output shaft inside the transmission, worn transmission gears, or faulty shifting mechanism, require immediate attention. It is essential to visit a 4S shop or a professional auto repair shop for technician repairs.
19
5
Share

What are the vehicle warning lights?

There are ten main warning lights: 1. Oil pressure warning light: When illuminated, it indicates the engine oil level or pressure is below standard. Continued driving may cause severe engine wear due to lack of lubrication. 2. Coolant temperature warning light: Displays the temperature of the engine coolant. 3. Engine malfunction light: Shows the engine's operational status, typically in yellow. It lights up during ignition self-check and should turn off after starting. Persistent illumination indicates potential engine system issues. 4. Brake system warning light: If illuminated, first ensure the parking brake is fully released. If it remains lit, check brake fluid level or pad thickness. 5. Power steering warning light: Indicates malfunction in the power steering system. 6. Door/hood open warning light: Warns if doors or hood aren't properly closed. 7. Tire pressure monitoring light: Signals low tire pressure or possible tire damage. 8. Battery warning light: Usually yellow, it should turn off after self-check. 9. ABS warning light: Primarily yellow, failure to light during self-check or persistent illumination indicates potential ABS system faults. 10. Electronic stability control light: Normally indicates system deactivation when lit, and activation when off.
3
1
Share

Should the Foot Always Be on the Brake in an Automatic Transmission?

In an automatic transmission, the foot should not always be on the brake. It is best for the driver to keep the foot in the middle behind the brake and accelerator pedals. Below are specific details about the driver's foot placement: 1. Right Foot: The right foot should always be placed in the middle behind the brake and accelerator pedals. This makes it easier to step on the brake in case of an emergency and also facilitates acceleration. Tilting to the right is the accelerator pedal, while stepping straight down is the brake pedal. 2. Precautions: Do not use the left foot for braking and the right foot for acceleration, as this may lead to simultaneous pressing, wasting fuel and making operation difficult. 3. Correct Movement: The standard way to press the accelerator and brake is to pivot the heel of the right foot and rotate left or right to press, keeping the heel on the ground.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.