How to activate the one-touch window up/down function for Changan CS75?

[VonLucia]

The method to activate the one-touch window up/down function for Changan CS75 is to visit a 4S dealership to enable this feature. You need to sign a liability waiver agreement because the one-touch window operation carries certain risks. Once activated, you can long-press the lock or unlock button on the remote key to operate the windows with one touch. Additional relevant information is as follows: 1. Generally, mid-to-high-end vehicle models are equipped with the one-touch window up/down function, mainly for the convenience of the driver. It can effectively prevent the driver from being distracted by operating the windows, thereby improving driving safety. 2. For drivers, sometimes it is necessary to fully lower the window, such as when taking a card at a highway toll booth or paying for parking. Operating the windows while driving can pose safety hazards due to multitasking. Therefore, the one-touch window function is extremely convenient for the driver's window and almost eliminates the risk of accidentally triggering the one-touch up function and getting hands caught in the window.

[LeKeegan]

When I first bought my Changan CS75, the one-touch window operation wasn't working. I figured out a convenient activation method myself. First, start the car's ignition, then pull the window switch upward to the top and hold it for about 3 to 5 seconds until you hear a beep or the window moves slightly before releasing. Next, push the switch downward to the bottom and similarly hold for 3 to 5 seconds before letting go. After repeating this process, the next time you press the switch briefly, the window will automatically go up or down. I find this feature particularly useful on highways, allowing quick ventilation without distracting from driving, making long drives much safer. If it still doesn't work, the manual suggests checking for loose circuit connections.

[OMalia]

I often do minor repairs myself, and activating the one-touch up/down feature for the Changan CS75 is quite simple: Start the engine, quickly press the window button all the way up and hold for three seconds before releasing; then press it all the way down and hold for another three seconds before releasing, and the system will memorize the positions. After testing, make sure the one-touch operation works. I frequently use this trick when doing DIY in the garage, but be careful not to attempt it when the battery is low, as the window might get stuck, which can be troublesome. If initialization fails, it might be due to dirty contacts—just clean the switch and it should work.

[Arianna]

We have a CS75 at home, and my child loves the one-touch up/down anti-pinch feature. Activation is simple: after ignition, hold the up button for three seconds, then press the down button for three seconds to complete the setup. It's especially convenient for daily school runs—just a tap to slightly open the window for ventilation. If you encounter any malfunctions, remember to reset the button—safety first.

[MacJayden]

I believe the one-touch up/down function relies on signal initialization. The activation method is to start the vehicle, push the window button all the way up for 5 seconds to record the maximum point, then pull it down for 5 seconds to set the minimum point. This way, the controller learns the positions, and the next time you lightly touch the button, it will complete the action. When it's not working, check for stable voltage and avoid accidentally pressing other buttons.

[MaliaLee]

I remember the one-touch function needed manual activation when the car was new: ignition, pull the switch up and hold for five seconds until a sound is heard; push it down fully for five seconds to complete. As a seasoned driver, I find this much more effortless compared to old-school cars. Reactivate it periodically if windows remain unused for extended periods to prevent malfunctions, and always remember to cut power to the protection system after parking.