What should be paid attention to when driving on the highway?

2 Answers
LeZachary
07/28/25 8:54pm
Here are the relevant precautions for driving on the highway: Strictly adhere to highway speed limits: This includes both the maximum and minimum speed limits. Do not exceed the maximum speed or drive below the minimum speed, as both can easily lead to safety accidents. On two-lane highways, use the left lane; on highways with three or more lanes, use the middle lane. The right lane often has many large trucks, so try to stay away from it. Check the vehicle's condition before entering the highway: Pay special attention to the fuel tank, tires, brakes, and water. If the tires are severely damaged, replace them first. If there are issues with the brakes, repair them promptly. Due to the high speeds on highways, the windshield can easily become covered with insect remains, and windshield washer fluid will be very useful in such situations.
Was this review help?
20
5
Share
JourneyLee
08/12/25 1:36am
I often drive my family on highways, so I really need to pay extra attention to safety. Before hitting the road, I always thoroughly check the car: tire pressure must be sufficient, oil and coolant levels normal, brakes responsive, and lights bright and functional. On the road, I maintain a safe distance of at least 100 meters to avoid tailgating and prevent rear-end collisions; speed limits are non-negotiable—I never exceed them because higher speeds make control harder. I absolutely avoid drowsy driving, stopping at rest areas every two hours or so to stretch, drink water, and refresh my mind. If it rains or gets foggy, I cut my speed in half and turn on fog lights to ensure clear visibility. When traveling with kids, I double-check that child seats are securely fastened and pack snacks and toys in the backpack to prevent fussiness and distractions. In short, problems on the highway can be twice as dangerous, so it’s better to drive slow and arrive home safely than to rush and risk it all.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How to Open the Fuel Tank Cap of the Lavida Tourer?

The method to open the fuel tank cap of the Lavida Tourer: After unlocking, simply press the fuel tank cap with your hand to open it. More information about the Lavida Tourer is as follows: 1. The Lavida Tourer is a highly anticipated model launched by Shanghai Volkswagen in 2013. Its front design inherits the Volkswagen family face, with only slight differences in the details of the grille and bumper air intake. 2. The Lavida Tourer continues Shanghai Volkswagen's technological advantages of surpassing class standards, featuring a newly upgraded DSG seven-speed dual-clutch transmission. Compared to the original engine, it increases power while reducing fuel consumption by 15%, truly showcasing a perfect and ultimate powertrain configuration.
19
2
Share

What is the Vehicle Registration Certificate

Vehicle Registration Certificate is the legal proof of vehicle ownership. It is kept by the vehicle owner and does not need to be carried in the vehicle. However, it is required to present the Vehicle Registration Certificate when handling any vehicle registration procedures such as transfer of ownership or change of registration, and relevant vehicle information is recorded on it. The following are the review contents of the Vehicle Registration Certificate: 1. Whether it is a first-hand car: Check if the owner's ID documents match those used when applying for the Vehicle Registration Certificate, and if the numbers are consistent. 2. Contents filled in the domestic/import section: Pay special attention if there are terms such as 'import', 'customs', 'confiscated by industry and commerce', or 'self-brought from overseas'. 3. Contents filled in the usage nature section: Check whether the usage nature is for commercial or non-commercial purposes. If it is for commercial use, be cautious and notify the pricing center promptly. 4. Whether there is a mortgage loan: The owner must contact the lending bank to complete the mortgage release procedure; otherwise, the transfer cannot be processed.
10
2
Share

What Causes High Fuel Consumption in Vehicles?

Here are the reasons for high fuel consumption in vehicles: 1. Engine Carbon Deposits: Stop-and-go driving conditions in the city can increase carbon deposits, and the habit of idling to warm up the engine also contributes to carbon buildup. Many driving conditions and habits can lead to carbon accumulation. Excessive carbon deposits can affect the throttle's air intake, making the vehicle prone to stalling; carbon deposits can also adhere to the intake passages, reducing intake efficiency and worsening the air-fuel mixture; severe carbon deposits can even occupy cylinder volume, affecting combustion quality and causing knocking. 2. Spark Plugs Need Replacement: Spark plugs are responsible for igniting the air-fuel mixture in the cylinders. Years of operation can wear them out, leading to insufficient ignition energy and dimmer sparks. The combustion time in the cylinders is very brief, leaving no room for slow ignition—the quality of the spark at the moment of ignition directly affects combustion quality and completeness.
16
4
Share

Where is the fuel pump located in the Chevrolet Sail?

The fuel pump in the Chevrolet Sail is located under the rear seats. Here is more information about the fuel pump: 1. The maximum fuel supply of the fuel pump is 2.5 to 3.5 times greater than the maximum fuel consumption of the engine. When the fuel supply exceeds consumption and the carburetor float chamber needle valve closes, the pressure in the fuel pump's outlet line increases, causing the diaphragm to shorten its stroke or stop working. 2. Electric fuel pump: Instead of being driven by the camshaft, it operates by electromagnetic force repeatedly moving the pump diaphragm. This type of electric pump allows flexible installation positioning and helps prevent vapor lock. The fuel pump in an electronically controlled fuel injection system typically uses a new impeller-type electric pump installed inside the fuel tank, and its pumping pressure is higher than that of carburetor fuel supply systems.
6
4
Share

Are Snow Tires Fuel-Consuming?

Snow tires are indeed fuel-consuming because their aspect ratio is different, and they have a larger contact area with the ground compared to regular tires, resulting in a higher friction coefficient. Since friction equals the friction coefficient multiplied by pressure, increased friction naturally leads to higher fuel consumption. Common misconceptions about snow tires are as follows: 1. New cars don't need snow tires: New tires and snow tires differ significantly in tread patterns and materials. Most high-quality snow tires remain flexible at temperatures as low as -20°C, whereas regular tires cannot achieve this. The tread design of snow tires is optimized for winter traction, and all-season tires, even with new treads, cannot replace snow tires in winter conditions. 2. Two-wheel-drive vehicles only need two snow tires: Most family cars are two-wheel-drive vehicles. If only two snow tires are installed on a two-wheel-drive car, starting the car may not pose a significant issue, but during braking, the difference in friction coefficients between the front and rear tires may cause the front wheels to stop while the rear wheels continue moving, leading to skidding or fishtailing, which can be more dangerous in certain situations. 3. Snow tires guarantee complete safety: Snow tires are not absolutely safe. When driving at high speeds, even with snow tires, braking distances will increase. Therefore, it is still essential to control your speed when driving on icy or snowy roads.
10
0
Share

Where is the Tire Pressure Monitoring Reset Button Located?

The tire pressure monitoring reset button is located on the control lever to the left of the steering wheel. Tire pressure reset is an operation performed on the tire pressure monitoring system after addressing tire pressure faults, aimed at resetting the system. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button upon hearing a beep sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault indicator on the dashboard will turn off, completing the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal Tire Pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire Pressure Monitoring Not Reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system retains the old data, causing the tire pressure monitoring indicator to light up. A simple tire pressure reset will resolve this issue. Damaged Tire Pressure Sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors the tire pressure. If the sensor is damaged during driving, such as by hitting the tire, it can trigger the tire pressure fault light. In case of sensor damage, the only solution is to replace it with a new one.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.