What should be paid attention to when changing tires?

2 Answers
DeJameson
07/24/25 1:29am
Precautions for tire replacement: 1. Consistent specifications: The replacement tires should have the same specifications as the original tires installed on the vehicle. 2. Balance: When replacing two tires at the same time, each wheel must be rebalanced after replacement to ensure that the mass of each part of the assembly is very uniform. Tires are one of the most important components of a car, and their main functions include: 1. Support: Supporting the entire weight of the vehicle, bearing the load of the car, transmitting traction and braking torque, and ensuring the adhesion between the wheels and the road surface. 2. Smoothness: Reducing and absorbing vibrations and impacts during driving, preventing severe vibrations and premature damage to car components, adapting to the high-speed performance of the vehicle, reducing driving noise, and ensuring driving safety, handling stability, comfort, and energy-saving economy.
Was this review help?
2
3
Share
JocelynLee
08/10/25 9:09pm
I've been changing tires for over a decade, and safety is the top priority. Always find a flat and secure spot to park—never attempt it on curves or steep slopes where traffic is heavy and dangerous. Once parked, firmly engage the handbrake and shift into first gear or reverse to prevent rolling. Position the jack correctly on the chassis support points, avoiding plastic parts to prevent body damage. Loosen the lug nuts with a socket wrench but don’t remove them entirely; wait until the car is lifted to take the tire off. When installing the new tire, tighten the nuts in a crisscross pattern in two stages: first halfway, then fully after lowering the car to ensure even pressure and avoid warping. After replacement, check if the tire pressure meets standards—overinflation risks blowouts, while underinflation hurts handling. Don’t forget to test warning lights and indicators. Regular pressure and wear checks can reduce replacements. Extra caution in rain—slippery ground increases mishaps. A few minutes’ patience beats taking risks.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

Can an aluminum hood dent be repaired?

An aluminum hood dent can be repaired. Hood dent repair methods: Hood dents can be repaired using traditional sheet metal repair techniques. Sheet metal repair involves restoring the deformed metal shell of the car to its original condition, making the surface as smooth and shiny as undamaged areas. Alternatively, dent repair tools can be used. These tools employ devices like hot glue guns and bridge-style suction pullers to attach suction cups to the car body and pull out the dent using tension principles. Principles of dent repair: Dent repair is based on optical, physical, and mechanical principles, utilizing leverage to address dents of varying sizes and depths caused by external factors on the vehicle body. This modern technique works on the premise that the car's paint surface remains undamaged and the metal surface hasn't undergone excessive stretching. Repaired areas will maintain their shape and color permanently without deformation or fading.
12
0
Share

Should You Press the Brake or the Clutch First When Parking a Manual Transmission Car?

Whether to press the clutch or the brake first when parking a manual transmission car depends on different situations: 1. When the speed is high, press the brake first and then the clutch; 2. When the speed is low, you can press the clutch first and then the brake. A manual transmission refers to a car that uses a manual gear-shifting mechanical transmission to adjust speed. It requires manually moving the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The method for parking a manual transmission car is: 1. Lightly press the brake to reduce speed, then press the clutch; 2. After coming to a complete stop, shift to neutral, engage the handbrake, and turn off the engine. The method for starting a manual transmission car is: 1. Turn on the ignition switch and start the engine; 2. Press the clutch pedal, shift the gear lever into first gear, and release the handbrake; 3. Slowly release the clutch pedal while pressing the accelerator.
20
0
Share

What is the positioning of the Haval H9?

The positioning of the Haval H9 is a mid-to-large-size SUV. SUV models are divided into five levels, ranked from high to low as follows: full-size SUV, mid-to-large-size SUV, mid-size SUV, compact SUV, and small SUV. The Haval H9 currently on sale is the 2020 model, all of which meet the China VI emission standards. The body dimensions of the Haval H9 are 4856mm in length, 1926mm in width, and 1900mm in height, with a wheelbase of 2800mm. The seating layout is available in both 5-seater and 7-seater versions. In terms of power, the vehicle is equipped with a 2.0T inline 4-cylinder turbocharged engine across the entire lineup, paired with an 8-speed automatic transmission. It delivers a maximum power of 165 kW, maximum horsepower of 224 PS, and maximum torque of 385 Nm. The maximum power is achieved at 5500 rpm, while the maximum torque is available between 1800 and 3600 rpm. All models feature direct fuel injection.
11
4
Share

Is the Haval H9 a four-wheel drive vehicle?

Haval H9 is a four-wheel drive vehicle equipped with an on-demand four-wheel drive system. The on-demand four-wheel drive system only switches to four-wheel drive when necessary, while remaining in two-wheel drive under other circumstances. The system automatically switches between two-wheel drive and four-wheel drive modes based on the driving conditions, without requiring manual operation. Haval H9 is a mid-to-large-sized SUV under the Haval brand, powered by two types of engines: a 2.0-liter turbocharged gasoline engine and a 2.0-liter turbocharged diesel engine. The 2.0-liter turbocharged gasoline engine delivers a maximum horsepower of 224 hp and a maximum torque of 385 Nm, with the maximum power output at 5500 rpm and the maximum torque available between 1800 to 3600 rpm. The 2.0-liter turbocharged diesel engine produces a maximum horsepower of 190 hp and a maximum torque of 420 Nm, with the maximum power output at 4000 rpm and the maximum torque available between 1400 to 2400 rpm.
16
1
Share

How many kilometers can 7 liters of fuel run?

7 liters of fuel can run approximately 700 kilometers. The following is a related introduction to fuel consumption: Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data per 100 kilometers for the model when traveling at a specified speed. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated by repeatedly testing the fuel consumption of a vehicle traveling on a specified road at a specified speed and time, also known as multi-condition road cycle fuel consumption. In the specification, each cycle includes various driving conditions, and the driving conditions are recorded according to various indicators such as the specified shift time, parking time, driving speed, acceleration, braking, and deceleration in each cycle. The measured value obtained by this method is closer to the actual value.
14
5
Share

What is the difference between manual and automatic transmission cars?

The differences between manual and automatic transmission cars are: 1. Different gears: Manual transmission cars have gears 1, 2, 3, 4, 5, and R; automatic transmission cars have P, N, D, R, and hill-climbing gears. 2. Different operations: Manual transmission requires stepping on the clutch for manual gear shifting and reversing; automatic transmission does not require stepping on the clutch, only the brake and accelerator. The starting steps for an automatic transmission car are: 1. Press the start button, the ACC light comes on for vehicle self-check; 2. Turn the ignition key to the second position, the computer system starts self-check; 3. Step on the brake and press the start button to ignite and start; 4. Release the foot brake and let the car warm up for 1 to 3 minutes; 5. Step on the brake again, shift to D gear, and release the handbrake to start.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.