···
Log in / Register

What does the gear exclamation mark mean in the Emgrand?

6Answers
JulianaRose
07/28/2025

Gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil needs to be replaced promptly. The exclamation mark is a common fault warning in cars. In addition to the gear with an exclamation mark, there are four other forms of exclamation marks: a triangle with an exclamation mark, a circle with an exclamation mark in the middle, a bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. The following is a detailed analysis of these four situations: General fault: A triangle with an exclamation mark. If this symbol lights up, it indicates a fault in the car's general performance or components and functions. Main faults include parking sensor failure, fuel cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Brake system fault: A circle with an exclamation mark in the middle. This represents a warning of the brake system, mainly indicating a fault in the brake system or low brake fluid level. The brake system needs to be inspected immediately to avoid accidents. Tire pressure abnormality: A bracket with a horizontal line and an exclamation mark in the middle. This represents the tire pressure monitoring warning light. When the tire pressure of the car is too low, this warning light will come on. It is necessary to check the tire pressure of the car and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating that a car light has failed. Solution: Go to a 4S shop for inspection and treatment as soon as possible, or you can check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to see where the problem is.

Was this review help?
1
4
Share
KevinMarie
08/11/2025

The gear-shaped warning light with an exclamation mark in the Emgrand came on, which I encountered last time too. As a veteran driver with ten years of experience, this indicates a potential transmission issue. The transmission is the heart of a car, and once it fails, it's a real headache. Common causes include excessively high transmission fluid temperature—especially during traffic jams or mountain driving—where soaring temperatures trigger the sensor; low fluid levels can also trigger the warning due to the protection mechanism activating; or the sensor itself might be faulty, sending false alerts. More serious issues include mechanical failures like gear wear or valve body damage. My advice is to immediately slow down and pull over, check the dipstick to see if the fluid level is normal—if it's below the marked line, top it up with genuine fluid. Never continue driving, as this could destroy the entire transmission, with repairs costing anywhere from a few thousand to over ten thousand. Some Emgrand owners in car forums shared that timely diagnosis at a 4S shop can avoid major repairs, averaging around 500 yuan. Remember, safety comes first—ignoring this warning light can lead to loss of vehicle control.

Was this review help?
12
2
Share
Expand All
EverlyLee
09/29/2025

When the gear exclamation mark appears on the Emgrand, I'm genuinely concerned about safety. As a family driver who prioritizes safety, this warning light indicates an automatic transmission system alert. Possible causes include insufficient transmission oil leading to lubrication failure; or sensor false alarms for high temperature or pressure issues; it could also be an electronic control unit malfunction. Ignoring it may result in sudden gear shift failure on highways, increasing accident risks. I recommend pulling over and turning off the engine immediately, waiting a few minutes for the car to cool down, and checking the emergency procedures in the user manual. Preventive measures include regular transmission oil checks—replace it every 50,000 kilometers—and avoiding overloaded driving in high-temperature environments. In most cases, professional repairs are sufficient with reasonable costs, but delays can damage the vehicle. Many car owners on social media regret neglecting repairs, only to end up stranded on the road. Safety is no small matter—prompt response is always best.

Was this review help?
19
3
Share
Expand All
Orlando
11/12/2025

When the gear exclamation mark warning appears on the Emgrand, it indicates a transmission-related issue. Possible causes include transmission overheating, excessive oil temperature, insufficient oil level, or commonly encountered sensor malfunctions. This can affect driving performance, such as delayed gear shifting or jerky movements. The key is not to delay - safely stop the vehicle for inspection and then proceed with repairs.

Was this review help?
13
3
Share
Expand All
DelAriana
01/02/2026

The Emgrand displays a gear exclamation mark, and I must say, act quickly. Check if the transmission fluid level is sufficient, and top it up if not; observe if the environment is high-temperature, and let the car rest if so; drive to a repair shop immediately for diagnosis, and avoid highway driving. For prevention, do not exceed the oil change interval.

Was this review help?
18
5
Share
Expand All
HZoe
03/30/2026

The Emgrand's gear exclamation mark light is on. I'm used to focusing on long-term maintenance. This indicates an issue with the transmission system, such as high oil temperature or dirty oil; aging sensors could also be the cause. To prevent this warning, it's recommended to change the transmission oil regularly, every 50,000 kilometers; clean the oil filter; and avoid sudden acceleration while driving. Once the light comes on, contact a technician to prevent minor issues from becoming major ones.

Was this review help?
9
5
Share
Expand All
More Q&A

How to Check the Date of Headlights on a Used Car?

To read the production date of the headlights on a used car, you can check the stamp on the headlights, which is usually located at the bottom left or bottom right corner of the headlight. Below are specific details about replacing headlights: 1. Choosing Headlights: When selecting new headlights, you should choose the appropriate bulb model based on your car, while also considering factors such as annual inspections and whether the battery can handle it. It is best to opt for original equipment manufacturer (OEM) headlights. 2. Installation and Removal: Avoid touching the glass shell of the bulb directly with your hands during installation or removal. When installing the bulb, do not touch the glass part with your fingers, as even the slightest oil residue on the glass can shorten the bulb's lifespan and pose a risk of cracking with prolonged use. 3. Light Intensity: When replacing the bulb, compare the light intensity and adjust it properly in time, as adjusting it later can be time-consuming and labor-intensive.
8
3
Share

How to Adjust When the Car Body is Not Straight During Curb Parking?

Practice makes perfect. Here are the adjustment methods for an unaligned car body during curb parking: Use the wiper to judge whether the car front is straight—no problem. By comparing the wiper with road markings, maintain a fixed distance or angle while driving. If it deviates, it indicates the car front is not straight. Additionally, depending on each person's height difference, other parts of the car front can also serve as reference points, such as the roof corner or reinforcement ribs. Actually, the most crucial point to ensure the car front is straight is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car body is straight. When parking at the curb, after selecting the parking position, turn the steering wheel to the right. At this time, the steering angle should not be too large. When the center of the car front is about to align with the right edge line, immediately turn the steering wheel back to the left. The steering wheel turning range can be slightly larger at this point.
10
5
Share

What does a yellow light with an 'a' inside a circle on the dashboard mean?

The reason for a yellow light with an 'a' inside a circle appearing on the dashboard is that the engine auto start-stop system is active. At this time, the car often shuts off, and releasing the brake will automatically restart the engine, allowing normal driving to resume. The conditions for auto start-stop activation include: engine coolant temperature being too low after a cold start, typically below 70 degrees Celsius; outside temperature below 5 degrees Celsius, or cabin temperature below 20 degrees Celsius when heating is on; insufficient battery charge, usually below 60%; steering wheel angle exceeding 30 degrees; front seat belts not fastened; and parking on a slope. The auto start-stop function activates automatically each time the car is started, provided the above conditions are met, and the vehicle speed exceeds 3 km/h for about 4 seconds, without requiring any additional action from the driver. However, the auto start-stop function must be turned off in the following situations: during water wading; when driving on a slope (most cars are usually set to automatically disable it in this case); and when refueling, the engine must be completely turned off and power must be cut before refueling.
16
1
Share

What is the working principle of an evaporator?

The working principle of an automobile evaporator: The liquid refrigerant enters through the feed port, while the heating steam heats the heating tube bundle inside the heating chamber. The thicker tube in the middle of the heating chamber, due to its smaller heating area compared to the heating tube bundle, causes the refrigerant vaporized by the heating tube bundle to rise and enter the evaporation chamber. Below are related introductions: 1. Definition of the evaporator: The evaporator is a device used to heat the refrigerant and absorb heat from the external environment, mainly composed of a heating chamber and an evaporation chamber. 2. Application in thermal units: In fresh air heat exchange units and fan coil units, the evaporator primarily provides chilled water during the cooling process and heated refrigerant during the heating process. 3. Application in ground source heat pump systems: Its role in ground source heat pump systems is opposite to that of the condenser. During the heating process of the ground source heat pump unit, the evaporator acts as a ground source side device, heating the circulating water on the ground source side. The heated water is then transferred to the condenser through heat exchange in the unit, where the heat from the hot water is discharged by the condenser.
18
5
Share

What do 4L and 4H mean in 4WD vehicles?

4H and 4L are two modes available in four-wheel-drive vehicles. 4H stands for four-wheel-drive high-speed mode, while 4L stands for four-wheel-drive low-speed mode. These two drive modes have certain differences in controlling the transmission and are used in different scenarios. Properly utilizing the four-wheel-drive modes according to terrain can not only improve the vehicle's off-road capability but also reduce fuel consumption to some extent. Usage scenarios for 4H and 4L modes: 1. Slippery surfaces: If driving on snow or slippery roads, the 4H mode is very suitable, as it ensures sufficient drive wheels while avoiding excessive driving force that could cause wheel slip. 2. Climbing: Due to its strong driving force, the 4L mode can be used when climbing slopes or during off-road driving, maximizing the vehicle's power. 3. High-speed driving: High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, dry paved roads are not suitable for 4H or 4L modes; only the 2H mode should be selected.
11
3
Share

What documents are needed for car transfer?

The seller needs to prepare the original ID card of the vehicle owner, vehicle registration certificate, vehicle license, original purchase invoice or transfer invoice of the vehicle, and the buyer needs to provide the original ID card of the buyer. Some regions also require a "vehicle purchase quota". The procedures for car transfer are as follows: 1. Obtain the form: obtain and fill out a copy of the motor vehicle change, transfer, modification, suspension, or scrapping approval form. 2. Stamp: affix the same seal as the original registration, and private vehicles must submit the owner's ID card for verification. 3. Review: go to the vehicle management section of the traffic police detachment and submit the documents to the registration acceptance counter for review by the handling officer. 4. Inspection: vehicles that meet the transfer conditions will be sent to the motor vehicle inspection counter for inspection and confirmation. 5. Payment: after passing the inspection, for transfers or changes within the same county or city, go directly to the license plate management counter to wait for notification and pay the fee. 6. Tax payment: the transaction tax is issued by the used car trading center and is charged at 1.48% of the vehicle's estimated value.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.