···
Log in / Register

What Should Be Noted When a Car Turns?

4 Answers
EmmanuelRose
07/23/25 8:58pm
Precautions when a car turns include: 1. The speed should be slow, and the steering wheel should not be turned too sharply to avoid excessive centrifugal force causing the car to skid. If the car skids, immediately release the accelerator pedal and turn the steering wheel toward the side where the rear wheels are skidding. Once the vehicle resumes straight driving, straighten the steering wheel and continue driving; 2. Avoid using the brake as much as possible, especially emergency braking; 3. The operation of the steering wheel should correspond to the curvature of the road and match the driving speed, ensuring appropriate steering angle, proper timing for turning, and timely return of the steering wheel; 4. The driver should have a correct estimation of the wheel's driving trajectory.
Was this review help?
10
2
Share
NovaMarie
08/10/25 4:39pm
I always make it a habit to slow down in advance when turning, which is a crucial step for safe driving. I take extra care to observe when making left turns at urban intersections, as electric scooters often appear suddenly. Remember to turn on the turn signal to alert vehicles behind you, giving them at least three seconds to react. Steer the wheel steadily to avoid sudden movements that could lead to loss of control. Don’t forget to check blind spots, as pedestrians sometimes cross the road from behind the car. When turning on highway overpasses, also be mindful of centrifugal force—driving too fast can cause the car to fishtail. Wet roads in rainy weather are even more hazardous, so I reduce my speed by one-third compared to normal conditions. After completing the turn, avoid accelerating immediately; wait until the car is fully straightened before pressing the gas pedal for a smooth and safe process.
Was this review help?
9
3
Share
Expand All
VonKingston
09/23/25 4:21am
I always pay special attention to speed control when taking turns, especially when traveling with family. Driving too fast can make passengers uncomfortable, and children are more likely to hit the door frame. Before entering a curve, I release the accelerator to use engine braking for deceleration, which is much smoother than sudden braking. Steering should be done slowly and evenly to avoid startling elderly passengers in the back seat with sudden turns. When passing through the apex of the curve, I keep an eye on the rearview mirror and adjust the steering as needed to prevent lane deviation. Driving in the rain requires extra caution—I try to increase the turning radius to prevent skidding. I also watch out for uneven road surfaces or potholes, as these conditions can easily lead to tire blowouts. Regular checks of tire tread depth are essential, as severely worn tires have insufficient grip during turns, which is particularly dangerous. Maintaining safe driving habits is the key to protecting the whole family.
Was this review help?
19
1
Share
Expand All
DiHector
11/06/25 6:36am
Turning is something you really can't take lightly—I've learned my lesson the hard way, so I'm extra cautious. The scariest thing when driving in the city is making a right turn and hitting an e-bike running a red light. Every time, I have to crane my neck and double-check. Blind-spot monitoring is a great feature, but don't rely on it too much—physically turning your head to confirm is the most reliable. Speed control is especially important; taking sharp turns too fast can send items flying inside the cabin. Last time, my thermos nearly smashed into the dashboard. When making a left turn at an intersection, always wait for through traffic to pass first—some drivers love to rush those few seconds, which is super dangerous. Mountain road curves are even more thrilling—honk in advance as a warning, and if you can't see oncoming traffic, use the centerline dashes to judge the path. Stay in your own lane and don't imitate those drivers who hug the line. Stomping the gas too hard during a turn can also cause a skid—controlling your speed is the golden rule.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What are the functions of the Audi Q5L air conditioning buttons?

The functions of the Audi Q5L air conditioning buttons are: 1. The knobs on both sides are for temperature adjustment, and the AUTO button turns on the automatic air conditioning; 2. The fan-shaped button is for adjusting the air volume, and the icon of a person with three dots represents the air distribution mode; 3. The icon of a fan with three wavy lines is the button for defrosting the front windshield, while the rectangle with three wavy lines is for defrosting the rear windshield. Taking the Audi Q5L 2021 40TFSI Fashion Dynamic model as an example: It is a mid-size SUV launched by FAW-Volkswagen Audi, with dimensions of 4770mm in length, 1893mm in width, and 1667mm in height. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 140kw and a maximum torque of 320nm, matched with a 7-speed dual-clutch transmission.
15
3
Share

What are the effects of prolonged exposure to sunlight on a car?

Prolonged exposure to sunlight can have several negative effects on a car: 1. Accelerates the aging of interior materials. Car interiors are typically made of plastic, which can deform and produce unusual noises when exposed to prolonged sunlight. 2. Affects the vehicle's sealing performance. Many parts of a car are made of rubber, which can deteriorate under prolonged sunlight, reducing their sealing effectiveness. 3. Generates harmful gases. When exposed to high temperatures, car interiors can release harmful gases such as formaldehyde. Inhaling excessive amounts of formaldehyde can be hazardous to human health and affect overall well-being.
5
0
Share

Does Replacing the Windshield Count as an Accident Vehicle?

Whether replacing the windshield counts as an accident vehicle depends on the cause of the replacement—whether it was due to an accident or an unexpected incident. If the windshield was replaced due to damage caused by a collision, then the vehicle is considered an accident vehicle. However, if the replacement was due to an unforeseen and unavoidable event, such as a flying stone breaking the glass, then it does not qualify as an accident vehicle. A major taboo when replacing a car's windshield is improper installation. If the windshield is not installed correctly, it may affect the seal of the windshield. Violating this taboo with improper installation can lead to poor adhesion between the adhesive and the glass, resulting in a weak seal, air leaks, noise, and other potential hazards.
6
3
Share

What does the yellow dashed line on the road mean?

Yellow dashed lines are also used to separate lanes of traffic moving in opposite directions, typically marked on narrower road surfaces. Whether it's a single or double yellow line, as long as it's dashed, vehicles are permitted to cross the line for overtaking or making a U-turn, provided it is done safely. Single solid yellow line: Used on roads with fewer central lanes, a single solid yellow line strictly prohibits vehicles from crossing. Therefore, driving on the line, overtaking, or making a U-turn is not allowed. When a yellow solid line is marked on the roadside or curb, it indicates that parking—whether long-term or temporary—is prohibited. Yellow dashed and solid line: Often found near ramps, bridges, or where lanes merge into the main road, this marking allows vehicles on the dashed side to temporarily cross the line for overtaking or turning, while vehicles on the solid side must not cross the line, as doing so would be a traffic violation. Double solid yellow lines: These lines separate lanes of opposite-direction traffic and are usually painted in the center of the road. Double solid yellow lines strictly prohibit vehicles from crossing, meaning driving on the line, overtaking, or making a U-turn is not permitted. Yellow grid lines: These indicate no-stopping zones. The grid-like yellow markings designate areas where parking is prohibited for any reason. Such markings commonly appear near schools, institutions, residential areas, fire lanes, and intersections—places where temporary parking could easily cause congestion—reminding drivers not to stop under any circumstances.
3
5
Share

What does it mean when the EPS light on the car is on?

When the EPS light on the car is on, it indicates a chassis braking technology developed on the basis of the anti-lock braking system (ABS). It mainly consists of a control unit, steering sensor, wheel speed sensor, slip angle sensor, lateral acceleration sensor, and other components. EPS enables automatic vehicle safety control, effectively improving driving stability and safety under dynamic conditions such as braking, acceleration, and steering. The EPS system includes various sensors that comprehensively detect the vehicle's driving state, as well as an intelligent onboard microcomputer control system for analyzing and processing signals from these sensors. The sensors used in the EPS system include the yaw rate sensor, lateral acceleration sensor, steering wheel angle sensor, brake pressure sensor, and throttle position sensor, all of which are essential components of the system.
15
4
Share

What is the tutorial for using the Roewe i5 central control screen?

The tutorial for using the Roewe i5 central control screen is: 1. The vehicle is equipped with USB music and online music, with different shortcut buttons on the left side of the interface for easy switching between different functions; 2. The high-end model of this vehicle is equipped with a panoramic imaging function, which can display real-time road conditions around the vehicle on the central control screen. Taking the 2021 Roewe i5 1.5L Manual Platinum Edition as an example: The manufacturer of this car is SAIC Motor, classified as a compact car, with an energy type of gasoline, a 5-speed manual transmission, a body type of 4-door 5-seater sedan, a maximum speed of 185 km/h, and a naturally aspirated intake form.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.