···
Log in / Register

What should be added to a brand-new car?

6Answers
DiEvelyn
07/29/2025, 05:07:09 PM

For a brand-new car, the following items should be added: 1. Apply car window film. Direct sunlight on car windows can rapidly increase the interior temperature, potentially causing sunburn. 2. Install a dash cam. It records the driving process, ensuring the driver's safety. 3. Apply car protective paint. Since new cars are often stored outdoors before purchase, timely application of protective paint helps maintain the car's appearance. Additional details to note when purchasing a new car: 1. Check if all accompanying documents are complete. 2. Carefully confirm whether the car is a display model, stock car, test drive vehicle, faulty car, or accident car. 3. Verify the odometer reading. A new car should have less than 50 kilometers. 4. Inspect the car's exterior for scratches or dents.

Was this review help?
108
Share
SamanthaAnn
08/15/2025, 03:17:07 PM

For your newly purchased car, the first priority is to fill up with gasoline or diesel, depending on your vehicle's fuel type—this is the foundation of driving. Don't just drive off and forget; the fuel gauge might not be full. Next, check the engine oil level. New cars usually have no issues with oil, but if it's low, top it up with the appropriate engine oil—don't use random brands. Coolant is also crucial; pop the hood and check the reservoir. If it's below the marked level, top it up to prevent overheating. Don’t overlook brake fluid either—it’s essential for safe driving. It’s also a good idea to fill up the windshield washer fluid for clear and refreshing visibility. You might not need an oil change before the first service, but ensuring these fluids are topped up will keep your car running smoothly. Adding an air freshener can make the cabin more comfortable, as new cars often have strong odors that can cause discomfort. In short, these simple but necessary steps ensure your car is ready for daily use.

Was this review help?
10
Share
Expand All
Alexander
10/16/2025, 04:36:26 AM

The first thing to do after getting a new car is to fill it with higher-grade gasoline, like 95 or above, to protect engine performance. Don't rush to take it for a spin before doing this. Also, check the engine oil and top it up with the manufacturer-recommended oil if it's low—don't be careless. Refer to the manual for coolant levels; new cars usually have enough, but double-check just in case. Fill up the windshield washer fluid for regular dust cleaning. Tire pressure might be low, so inflate it to the recommended level for better fuel efficiency. For the interior, use a fresh spray to eliminate odors and create a pleasant atmosphere. Remember, filling up the tank before the first drive is essential to avoid the embarrassment of running out of fuel midway. These are small daily actions, but they make your new car more durable and worry-free.

Was this review help?
18
Share
Expand All
DiJoel
11/29/2025, 09:34:08 PM

For a new car, filling up the gas tank or charging it directly is the most reliable. Check the levels of engine oil, coolant, and brake fluid; if normal, leave them as is, if low, add a small amount. Windshield washer fluid often needs topping up to avoid damage from running dry. Adjust tire pressure to the standard indicated on the door pillar label. Pay attention to these during the first drive to prevent malfunctions. Simply topping up these essentials saves trouble.

Was this review help?
9
Share
Expand All
ElizabethFitz
01/19/2026, 10:57:48 PM

For a new car, first fill up the fuel tank to ensure smooth startup. Next, check the engine oil and add the appropriate type if necessary, being careful not to exceed the maximum level. Refer to the manual for recommended levels of coolant and brake fluid, topping up if low, though most new cars come pre-filled. Ensure the windshield washer fluid is full for regular cleaning and safe driving. Also, secure the battery connections and consider keeping jumper cables handy for emergencies. These steps not only maintain your car's condition but also extend its lifespan—beginners should take care not to overlook them. Follow these procedures for peace of mind and safety.

Was this review help?
9
Share
Expand All
JudahDella
04/15/2026, 11:50:03 PM

Just after picking up the car, fill it with high-quality gasoline, opting for low-sulfur options to reduce pollution, or fully charge an electric vehicle. Then, add eco-friendly windshield washer fluid for cleaning and glass protection. Add engine oil according to the manual—most new cars are fine, but check and top up to the appropriate level. Top up coolant and brake fluid slightly as indicated by the markers. Inflate tires to the standard pressure for fuel efficiency and environmental benefits. Add a natural deodorizer to keep the interior fresh and comfortable, which is also good for health. All these simple maintenance actions help reduce the risk of malfunctions when done regularly, keeping the car running longer and benefiting the environment.

Was this review help?
14
Share
Expand All
More Q&A

Why Doesn't Audi Produce Rear-Wheel Drive Cars?

Audi's Quattro all-wheel drive system was born, transitioning directly from front-wheel drive to all-wheel drive. Introduction to All-Wheel Drive: All-wheel drive refers to a vehicle maintaining four-wheel drive throughout the entire driving process. The engine's output torque is distributed to the front and rear wheels in a fixed ratio. This driving mode ensures good off-road and handling performance at all times, but it cannot adjust torque distribution based on road conditions and has relatively high fuel consumption. Part-Time Four-Wheel Drive: Part-time four-wheel drive is a system where the driver can manually choose between two-wheel drive and four-wheel drive. By engaging or disengaging the transfer case according to driving needs, the purpose of switching between two-wheel drive and four-wheel drive is achieved. This is also the most common four-wheel drive system for off-road vehicles or SUVs with four-wheel drive capabilities.
110
Share

To what extent can wheel hub damage render it unusable?

Generally, it mainly depends on the level of deformation and cracking of the wheel hub. If the wheel rim is deformed or cracked, the tire should be tested on a dynamic balancing machine. If the tire shows signs of shaking, then the tire cannot be used anymore. Below is a detailed introduction: 1. Degree of damage: If the wheel rim is only slightly impacted, it will not cause significant harm to the suspension system. If the impact is more severe, it is necessary to go to a repair shop for inspection, including four-wheel alignment checks, etc. 2. Hazards: If the tire hits the curb, it will cause certain damage to the tire, wheel rim, suspension, and shock absorber. In severe cases, it can damage the tire, causing bulges on the tire sidewall, tire blowouts, wheel hub deformation, and may also damage the suspension system, leading to body deformation and noise during driving.
102
Share

What is the minimum ground clearance of the new CR-V?

The minimum ground clearance of the new CR-V is 179mm. Introduction to ground clearance: The ground clearance of a vehicle refers to the distance between the ground and the lowest point of the rigid components at the bottom of the vehicle when it is parked on a level surface. It is also commonly known as the minimum ground clearance. This is an important parameter in automotive design, as the size of the ground clearance directly affects the vehicle's off-road capability and appearance. Large ground clearance: The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability. Small ground clearance: The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which increases stability.
120
Share

What is the weight of the Bora Legend body?

Bora Legend manual transmission model has a curb weight of 1240Kg, while the automatic transmission model weighs 1275Kg. The differences between Bora and Bora Legend are as follows: Different tire specifications: Bora tire specification is 195/65r15; Bora Legend tire specification is 205/55r16. Different body dimensions: Bora body length, width, and height are 4663mm, 1815mm, and 1462mm respectively; Bora Legend body length, width, and height are 4562mm, 1793mm, and 1468mm respectively. Different engine models: Bora engine model is ea211dmb; Bora Legend engine model is ea211dlf. Different platforms: Bora is built on the MQB platform; Bora Legend is built on the PQ34 platform.
106
Share

What Causes the Squeaking Sound When Turning the Steering Wheel While the Car is Stationary?

Car makes squeaking sound when turning the steering wheel while stationary due to the following reasons: Loose shock absorber mounting: Long-term vibrations during driving can cause the mounting nuts to loosen, leading to abnormal noises from the shock absorber. Tightening the mounting nuts can resolve the issue. Shock absorber oil deficiency: Insufficient oil in the shock absorber can also cause abnormal noises. Check if the shock absorber is leaking oil. If it is leaking, it is recommended to replace the shock absorber directly. If there is no oil leakage, inspect other components of the shock absorber system. Worn rubber bushings: Worn rubber bushings at both ends of the shock absorber create gaps at the mounting points, causing noise while the car is moving. Replacing the rubber bushings can solve the problem.
101
Share

What kind of engine oil should be used for Lavida Plus?

Lavida Plus can use original factory oil or synthetic oil. Synthetic oil: Using synthetic oil can appropriately extend the oil change interval. Oil selection: For oil selection, if you prioritize long-lasting performance, Mobil oil can be used; if you value the cleaning ability of the oil for the engine, Shell lubricants can be used; for oils requiring strong oil film toughness, Castrol is recommended. For example, turbocharged engines are prone to carbon deposits during high-speed operation, so Shell oil with strong cleaning ability can be chosen. Full synthetic oil: Naturally aspirated engines have relatively general requirements for oil quality. For example, Lavida 1.6 can use mineral oil or semi-synthetic oil, and if the budget allows, full synthetic oil can be used.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.