What's the reason for not being able to open the fuel tank cap?

1 Answers
LeDelaney
07/29/25 1:16pm
You can insert a small wooden piece into the gap of the fuel tank cap to pry it open, while remembering to pull the fuel tank cap's latch switch during the process. Here is a related introduction to three methods of opening a car's fuel tank cap: 1. Mechanical key opening method: This type of fuel tank cap switch is relatively rare, usually found in some rugged off-road vehicles. Most family cars do not use mechanical keys for opening, as it is relatively more complicated to use. 2. In-car switch method: The in-car switch is currently the most common way to open the fuel tank door, offering more convenience compared to using a key. The location of the in-car switch varies across different car models; some are found on the floor to the left of the driver's seat, some on the left front door panel or the center console, all marked with a fuel pump symbol. 3. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method, requiring only parking the car before refueling. However, if refueling is not done while parked, the central locking must be engaged; otherwise, the fuel tank cap can be opened.
Was this review help?
20
2
Share
More Forum Discussions

What is Daihatsu?

Daihatsu is the abbreviation of Daihatsu Motor Co., Ltd., a brand under Toyota, dedicated to the development of small cars. It possesses advanced production capabilities in engines, space, vehicle safety, and environmental protection. Below is extended information about Daihatsu cars: Daihatsu Xenia: The Daihatsu Xenia is a multi-functional sedan launched by Daihatsu. It is equipped with two engine displacements, 1.5L and 1.3L, offering a total of six models: 1.3L CC, 1.5L five-seat manual CL, 1.5L five-seat automatic CL, 1.5L seven-seat manual CL, 1.5L seven-seat automatic CL, and 1.5L seven-seat automatic CX. Main Daihatsu Models: Daihatsu's current main models include the Daihatsu Xenia, MI-RA, MOVE, TAFT, Daihatsu D-R, Copen, Daihatsu FX, Sirion, Waku-Waku, Rocky, and others.
15
4
Share

How to Accelerate When Starting an Automatic Transmission Car?

When starting an automatic transmission car, you should first press the brake pedal, shift into gear, release the parking brake, and then smoothly lift the brake pedal. Gradually press the accelerator pedal after the car starts moving slowly. Here is some relevant information: 1. When starting, avoid stomping on the accelerator pedal suddenly, as it not only wastes fuel but also harms the car's transmission. You can wait until the engine speed reaches 2000~2500 RPM, then ease off the accelerator slightly before pressing it down further. 2. Continuously pressing the accelerator pedal hard may cause the car's onboard computer to interpret it as an intention to overtake, preventing the transmission from upshifting, which can result in a jerky sensation. Additional precautions when starting the car include: do not press the accelerator pedal after starting the engine but before moving the car; and do not release the brake pedal while shifting gears—only release it after completing the gear shift.
18
4
Share

What engine is used in the GAC Trumpchi GS5?

GAC Trumpchi GS5's engine is independently developed and produced by Guangzhou Automobile Group Passenger Vehicle Co., Ltd., and is a domestically manufactured engine. The engine model of the GAC Trumpchi GS5 is 4A15M1, with a maximum horsepower of 169, maximum power of 124kW, and maximum torque of 265Nm. For daily maintenance of the GAC Trumpchi GS5 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
4
5
Share

Where is the license plate Su D from?

Su D is the license plate of Changzhou City. More related information is as follows: 1. Nanjing City - Su A, Wuxi City - Su B, Xuzhou City - Su C, Changzhou City - Su D, Suzhou City - Su E, Nantong City - Su F, Lianyungang City - Su G, Huaiyin City - Su H, Yancheng City - Su J, Yangzhou City - Su K, Zhenjiang City - Su L, Taizhou City - Su M, Suqian City - Su N. The license plate number represents the prefecture-level city code where the vehicle is registered. The general rule is: A is the provincial capital, B is the second largest city in the province, C is the third largest city in the province, and so on. 2. The first character of the license plate is a Chinese character: representing the abbreviation of the province where the vehicle is registered. For example, Sichuan is Chuan, Beijing is Jing, Chongqing is Yu, and Shanghai is Hu. The second character is an English letter: representing the prefecture-level city code where the vehicle is registered.
15
3
Share

What are the upgrades of the GAC Toyota ix4?

GAC Toyota ix4 is based on the Trumpchi GS4-EV, with only minor differences between the two. The ix4 features an integrated front grille, while the GS4-EV has the Lingyun Wing grille. The L-shaped LED fog lights on the front bumper of the ix4 replace the circular fog lights of the GS4-EV. The headlight shape has been slightly modified and upgraded to LED lighting. At the rear, the ix4 has additional GAC Toyota and ix4 badges. Finally, the body structure has also been upgraded to enhance rigidity. More details are as follows: 1. The GAC Toyota ix4 adopts a cage-type body structure design, with high-strength steel above 600MPa accounting for nearly 35% of the body. Additionally, the B-pillar reinforcement plate and side panels use 1500MPa hot-formed steel, resulting in a stronger body structure and enhanced safety for occupants. 2. The GAC Toyota ix4 is built on the mature GS4 platform, equipped with a permanent magnet synchronous motor that delivers a maximum power output of 132kW and a maximum torque of 290Nm. The 0-50km/h acceleration time of 4.5 seconds is not particularly fast, but it is sufficient for stop-and-go city driving. 3. In terms of the battery, the ix4 is powered by a liquid-cooled ternary lithium battery with an energy density of 120Wh/kg, offering an NEDC range of 270km. The ix4 supports fast charging, capable of reaching 80% charge in just 30 minutes.
9
5
Share

What to Do When the Rear of the Car is Dented?

The dented rear door can be repaired at a repair shop through metalworking and painting. Auto body repair can fix the deformed parts of the car's outer shell. For example, if the car body is dented, metalworking can restore it to its original shape. Then, by applying specialized paint, the deformed metal surface can be restored to match the rest of the undamaged areas, making it look as good as new. The process of auto body repair and painting is as follows: 1. Metalworking: To restore the dented parts of the car body to their original state, hammering and welding are required. 2. Filler application: After metalworking, uneven areas are smoothed out using a clay-like substance (commonly known as filler). 3. Sanding: Different grades of sandpaper are used to smooth out the uneven surfaces of the filler. 4. Primer coating: To prevent rust, a layer of anti-rust paint is applied. 5. Color matching: Before painting, the paint color is matched to the car's original color using a color chart. 6. Painting: The paint is applied to the damaged area. 7. Baking: To quickly dry the paint, the vehicle is placed in a paint baking room for "drying." 8. Reassembly: Reinstall any parts that were removed before the metalworking process.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.