What's the Difference Between 1.4L and 1.6L?

1 Answers
AdrianaDella
07/29/25 8:07pm
1.4L and 1.6L generally refer to a car's displacement. Displacement is the volume of fluid inhaled or discharged per stroke or cycle, and it is an important parameter for measuring a car. For vehicles of the same brand, the differences between 1.4L and 1.6L are as follows: 1. Output Power: At the same engine speed, the output power of a 1.6L engine is significantly stronger than that of a 1.4L. 2. Performance: The power difference is minimal at low speeds, but when pressing the accelerator harder for rapid acceleration, the 1.4L engine's performance is noticeably inferior to the 1.6L. 3. City Fuel Consumption: The 1.4L has a clear advantage, being more fuel-efficient in urban driving. 4. Highway Fuel Consumption: The 1.6L is more fuel-efficient at high speeds.
Was this review help?
4
0
Share
More Forum Discussions

Automatic Transmission Gear Shifting Tips?

Here are the gear shifting tips for automatic transmission vehicles: 1. When unable to engage a gear or hearing gear noise, do not force it to avoid affecting shift timing and damaging components. 2. After completing a shift, do not leave your left foot idle on the clutch pedal, as this can cause clutch semi-engagement and increase mechanical wear. 3. When shifting gears while driving, except for special circumstances, do not skip gears when upshifting, but it's acceptable when downshifting. 4. When needing to engage reverse gear while driving, you must wait until the vehicle comes to a complete stop before shifting to avoid damaging components. 5. Make gear shifts clean and decisive, avoiding sloppy movements. Press the clutch pedal quickly and release it slowly.
15
1
Share

Meaning of Letters on Automatic Transmission Cars

Introduction to the letters on automatic transmission cars is as follows: 1. There are six positions for the gears of an automatic transmission car, from top to bottom: P, R, N, D, S, L. 2. P: Parking gear, starting gear. Prevents the car from rolling. 3. R: Reverse gear. Used when reversing the car. 4. N: Neutral gear. Used for temporary parking. 5. D: Drive gear. The transmission automatically shifts between gears 1-5 based on speed and throttle conditions. 6. S: Sport mode. When this gear is engaged, the gears can be freely switched, but it increases fuel consumption. 7. L: Low gear. The transmission stays in gear 1 without shifting up, providing some braking function when going downhill, and can be used in situations like slopes.
16
1
Share

What transmission is used in the BMW 3 Series?

BMW 3 Series uses transmissions from ZF. Specific performance is as follows: 1. In normal driving mode, it actively upshifts to keep the RPM below 2000, with very smooth shifting. 2. In sport mode, the transmission responds extremely quickly, with all upshifts and downshifts synchronized with your operations. Transmission technology features: 1. The latest BMW 3 Series is equipped with the third-generation ZF8HP, which has a history of eighteen years. 2. The first two generations of 8HP were optimized mainly by expanding the gear ratio, but for the third generation, maintaining 8 gears while expanding the ratio to 10 was not significant, so it still maintains an 8.6 gear ratio.
15
5
Share

What is the emission standard of the Haval H2s?

The current Haval H2s meets the China V emission standard, with a total of 6 models available. More details about the Haval H2s are as follows: 1. In terms of exterior and interior, the new model continues the design of the previous version. The red-label model features a honeycomb front grille, while the blue-label model has a hexagonal horizontal chrome grille. 2. The new model comes standard with the CarPlay+Carlife mobile phone connectivity system. The automatic Zhishang model adds features such as electric seats, side airbags, and automatic folding mirrors when locking the car. 3. In terms of power, the new Haval H2s still uses a 1.5T engine, with a maximum power of 110kW (150PS) and a peak torque of 210N·m. The transmission system is paired with either a 6MT or 7DCT gearbox, offering three driving modes: economy, standard, and sport.
20
4
Share

Can Full Vehicle Repainting Be Claimed on Insurance?

Full vehicle repainting can be claimed on insurance. There are three ways to claim full vehicle repainting through insurance as follows: 1. Purchase scratch insurance: If the car has scratches, you can directly file a claim with the insurance company. Up to six panels can be covered, excluding the roof. 2. Without scratch insurance: It is not easy to claim full vehicle repainting for an accident-damaged car because full repainting is expensive, the fixed cost is relatively high, and the assessed damage will also be higher. The car must be severely damaged to claim for repainting. Generally, insurance companies will not cover the full cost and will only compensate for the damaged paint surfaces. Additionally, car owners should note that they cannot use fraudulent means to claim full vehicle repainting. Full repainting is suitable only if the car body is severely damaged with significant dents or scratches. The original paint on the car body is usually of good quality, and replacing it with new paint may not necessarily be better—it depends on maintenance.
19
4
Share

How to Adjust the Steering Wheel of Changan Honor

Changan Honor steering wheel adjustment: The steering wheel can be adjusted both vertically and horizontally. Extend your arms forward parallel to the ground and place them on top of the steering wheel. Adjust the height of the steering wheel so that your arms are level with your shoulders, then lock the steering wheel to achieve the optimal position. Below are the detailed instructions for steering wheel adjustment: 1. Vertical adjustment refers to modifying the up and down distance of the steering wheel. This is designed to accommodate drivers of different heights, ensuring a comfortable space between the steering wheel and the driver. It allows the driver to maintain a comfortable legroom while adjusting the seat-to-steering wheel distance, as well as ensuring comfort in the vertical alignment with the steering wheel. 2. Horizontal adjustment refers to modifying the length along the axis of the steering wheel. This is designed to meet the needs of drivers of different body types regarding the distance between the steering wheel and themselves.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.