What oil should be used for the first maintenance of Changan CS75?

Can black-painted rims pass the annual vehicle inspection?

Black-painted rims can pass the annual vehicle inspection. According to regulations, as long as the specifications remain unchanged, it does not affect the inspection. Based on automotive traffic management laws, there are no explicit restrictions on the color of rims, but there is a requirement that they must not exceed 30% of the vehicle's overall color. The annual inspection time requirements for various types of motor vehicles are as follows: 1. For passenger transport vehicles, an annual inspection is required within 5 years; for vehicles over 5 years old, an inspection every 6 months is required. 2. For cargo vehicles and large or medium-sized non-passenger transport vehicles, an annual inspection is required within 10 years; for vehicles over 10 years old, an inspection every 6 months is required. 3. For small and micro non-passenger transport vehicles, an inspection every 2 years is required within 6 years; for vehicles over 6 years old, an annual inspection is required; for vehicles over 15 years old, an inspection every 6 months is required. 4. For motorcycles, an inspection every 2 years is required within 4 years; for vehicles over 4 years old, an annual inspection is required.

16

4

Share

What is the actual fuel consumption of the Emgrand GL 1.4t?

The MIIT comprehensive fuel consumption of the Emgrand GL 1.4T 6-speed manual transmission model is 5.9L/100km. The MIIT comprehensive fuel consumption of the Emgrand GL 1.4T 8-speed CVT model is also 5.9L/100km. Below is relevant information about the 2018 Emgrand GL: 1. Powertrain: The 2018 Emgrand GL is equipped with a 1.4T engine. The MIIT comprehensive fuel consumption for the manual transmission model is 5.9 liters per 100 kilometers. Based on real-world fuel consumption tests, the actual comprehensive fuel consumption is 6.7 liters for the manual transmission and 7.3 liters for the automatic transmission. 2. Suspension: The Emgrand GL uses a rear torsion beam suspension instead of an independent suspension, which significantly reduces rear seat comfort, especially on bumpy roads where this is very noticeable.

19

0

Share

How to Remove a Dash Cam?

For the removal of a clip-on rearview mirror dash cam without screws and the disassembly method of a dash cam, the steps are as follows: First, use a blade or card-like item to pry open the front panel, then you can see the screw holes inside the dash cam. Use a screwdriver to remove the screws, and the display panel can then be detached. There are clips around it; gently pry them with a screwdriver to remove the panel. After removing the panel, you can see the circuit board. There are 4 screws in relatively hidden positions around the circuit board display. Once these are removed, the back cover can be taken off. Here is some relevant information about dash cams: The function of a dash cam: The video footage recorded by a dash cam can be used as evidence in traffic accidents or in cases of fraud attempts (like staged accidents), serving as favorable proof. It legally safeguards the driver's rights and helps avoid disputes. It also records the distance traveled by the vehicle.

15

3

Share

Can You Lock the Car Without Turning Off the Engine?

You cannot lock the car without turning off the engine. For safety reasons, the car should be turned off before locking it. The reasons why the car key does not respond when locking the car are: 1. There is strong magnetic field interference around the car; 2. The car has malfunctioned; 3. The battery is dead or has poor contact; 4. The antenna of the remote transmitter in the car is aging; 5. The time control module in the remote key is faulty. The solutions for when the car key does not respond when locking the car are: 1. Check the battery circuit or replace the battery; 2. Check for aging circuits; 3. If the remote key does not work, use the mechanical key to lock the car; 4. Check the lock block and the condition of open or short circuits in the control circuit; 5. Park the car in another location and try again to avoid magnetic field interference signals.

4

Share

What is the gap size of a car spark plug?

The normal gap of a spark plug is generally 0.6~1.3 millimeters. Spark plug replacement procedure: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order, then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replace spark plugs every 40,000~60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km.

20

4

Share

What to Do If the Vehicle Stalls Suddenly While Driving?

If the car stalls suddenly while driving, depending on the road conditions at that time and if there is no emergency, you can slowly apply the brakes to prevent a rear-end collision. After the speed decreases, steer slowly to move the car to the roadside lane. Once parked at the roadside, turn on the hazard lights, set up the warning triangle, and call for a tow truck. Common causes of stalling are as follows: 1. Stalling due to carbon deposits: Especially at the electronic throttle, this is an intake system fault. When there is excessive carbon buildup at the throttle, releasing the accelerator while driving may cause the engine to stall, which often occurs in very old cars. However, this can be prevented. Normally, you may notice difficulty starting the engine, or even needing to press the accelerator to start it—these are signs of excessive carbon deposits at the throttle, which require timely cleaning. 2. Fuel supply failure: Usually caused by a damaged fuel pump, which cannot pump fuel. The fuel pump has a long lifespan, so damage typically occurs in older cars. Some fuel pumps fail while the car is parked, making it impossible to start, while others fail during driving. 3. Power supply failure: Usually caused by a damaged ignition coil, resulting in no high-voltage electricity to all spark plugs.

19

1

Share

What oil should be used for the first maintenance of Changan CS75?

Can black-painted rims pass the annual vehicle inspection?

What is the actual fuel consumption of the Emgrand GL 1.4t?

How to Remove a Dash Cam?

Can You Lock the Car Without Turning Off the Engine?

What is the gap size of a car spark plug?

What to Do If the Vehicle Stalls Suddenly While Driving?

What's the difference between 1.3t and 1.5t?

How to Deal with Indentations After Removing a Hand-Stitched Steering Wheel Cover?

Is the Tharu's transmission a dry or wet dual-clutch?

What is the minimum ground clearance of the Peugeot 4008?