What materials are needed for the first car maintenance?

2 Answers
LeGabriella
07/24/25 6:09pm
The items required for the first maintenance include: driver's license; vehicle registration certificate; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle purchase invoice, and you need to go to the designated first maintenance institution for the service. Note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car is driven, and the specific time varies by car, usually after driving 1,000 to 3,000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The completion of the first maintenance marks the end of the car's running-in period, and the car can now be driven according to the standard load and normal speed required by the vehicle. The time for the first insurance is calculated based on the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. Whichever comes first will be the standard. The first maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking whether various oil levels are normal, checking whether the generator belt and wiper blades are damaged, checking whether the tire pressure is normal, and checking whether the tires are damaged or bulging. Time required: It takes about 2 hours to complete all the work. The most important part of the first maintenance for a new car is changing the engine oil and oil filter. When changing the engine oil, the oil filter must be replaced together, and the selection of engine oil must refer to the "Vehicle Use and Maintenance Manual," as different models have different specified engine oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people will tidy up and clean their cars during holidays, washing the body with water and wiping it with a cloth. Here, it is important to remind that the interior of the car body does not need to be washed directly with water. If the floor mats are dirty, you can use a vacuum cleaner or take them out, brush them with detergent, dry them, and then put them back. There are many through holes under the rubber mats on the floor of the driver's cab. If water enters, it will not dry but will flow through the holes to parts like the gearbox, causing erosion and corrosion. The better approach is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is insufficient, it is recommended to drain the antifreeze early and add the same brand of antifreeze from the beginning. Because different brands of antifreeze have different chemical functions, the various functional additives may corrode each other. Different brands of antifreeze use different additives, so do not mix them to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When the bolts on a running car rust, they are usually oiled to make them work properly again. To prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to them, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts may loosen or even fall off, leading to driving failure. When promoting an EFI car, there is no need to step on the accelerator: The promoter of an EFI car is different from that of an ordinary car. Its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, making the promoter work smoothly.
Was this review help?
15
0
Share
DelHazel
08/11/25 10:04am
I remember when I took my car for its first maintenance, I did my homework in advance. I prepared the purchase invoice to prove the car was newly bought, the vehicle registration certificate to show the registration details, and my ID card to verify my identity in case someone else was doing it on my behalf. The maintenance manual was the most important because it recorded the free maintenance items and warranty period. I also recommend bringing the vehicle manual, which might contain additional maintenance tips, making the preparation more thorough. That maintenance went smoothly—the mechanic checked the engine oil and filter, and after the replacement, the car ran quieter. The first maintenance is usually done around 5,000 kilometers, is free, and shouldn’t be missed, as it helps extend the car’s lifespan and avoid major repairs later. I booked an appointment with the 4S store in advance, saving two hours of queuing time. After returning home, I recorded the maintenance details in the manual for easy reference next time.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What is the tire model of the Trumpchi GS8?

The tire model specification is 255/50R20. The first number 255 represents the tire width of 255MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 20 stands for the rim diameter of 20 inches. The middle letters or symbols have special meanings: "X" denotes high-pressure tires; "R" and "Z" represent radial tires; "—" indicates low-pressure tires. The fuel consumption per 100 kilometers is 5.3L. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
2
5
Share

Where is the handbrake of the Mercedes-Benz C260?

The Mercedes-Benz C260 is equipped with an electronic handbrake. The P symbol with a circle located to the left of the automatic gear lever is the handbrake of the Mercedes-Benz C260. After stepping on the brake, shift to P gear and pull this button to engage the handbrake and lock the wheels. Here is some additional information:1. Older traditional cars usually use mechanical handbrakes, but now most cars have started to adopt electronic handbrakes.2. The Mercedes-Benz C-Class models all feature electronic handbrakes, which do not require manual operation. The handbrake is automatically engaged when the engine is turned off and the doors are closed.3. If manual operation is desired, press the button marked with a P symbol located below the left side of the steering wheel to engage the handbrake, and pull it to release the handbrake. When shifting to P gear and turning off the engine, the dashboard will automatically display a P symbol, indicating that the electronic handbrake has been automatically engaged. For temporary stops, you can shift to N gear and manually press the electronic handbrake.4. The electronic handbrake is a technology that achieves parking braking through electronic control.
15
4
Share

Can a car still be inspected after 4 years of inspection overdue?

It is still possible to have a car inspected after 4 years of inspection overdue. Inspection conditions: Before the inspection, the owner of the overdue car must go to the traffic police department to accept penalties. After receiving the penalties according to the relevant regulations, the car can be inspected again. If an accident occurs with a vehicle that has not undergone annual inspection on time, the insurance company may refuse to compensate; if the vehicle is lost, the insurance company's refusal to compensate will increase the owner's loss. The insurance contract stipulates that it only applies to qualified and legal vehicles. Vehicles that have not undergone annual inspection are unqualified and are not allowed to drive on the road according to regulations. Insurance companies are also exempt from liability for such vehicles. Vehicle inspection overdue: Overdue vehicle inspections can be supplemented, but penalties will be imposed. If a motor vehicle fails to undergo safety technical inspection within the specified period, the owner must bring the vehicle license, copy of compulsory traffic insurance, and completed violation handling when going for annual inspection. The annual inspection can be conducted at the local vehicle management office.
7
3
Share

What is the structure of an automobile fuel tank?

An automobile fuel tank consists of a fuel tank cap, baffle plate, fuel gauge sensor, and filler neck. The most commonly used materials for fuel tanks are metal materials (steel plates and aluminum alloy), with additional anti-corrosion, anti-rust, and impact-resistant treatments (such as adding buffer rubber) on the surface. Fuel tanks can be roughly divided into: the tank body, fuel pump, filler pipe, etc. The function of the fuel tank cap: The fuel tank cap is usually designed with claws and a corrugated spring to press a rubber gasket, clamping the edge of the fuel tank opening to ensure sealing. Some caps are equipped with a locking device to prevent detachment or loss. The function of the baffle plate: The fuel tank generally has a baffle plate inside, which separates the return oil area from the pump's suction area, increases the circulation path of the oil, reduces the circulation speed, and helps with cooling, heat dissipation, bubble separation, and impurity sedimentation. The function of the fuel gauge sensor: Installed inside the fuel tank, it is a sliding rheostat linked with the fuel level float. The float and sliding rheostat form a small assembly, connected to the fuel gauge to indicate the amount of fuel in the tank. The function of the filler neck: The filter screen at the filler neck is used to filter out large impurities in the fuel.
2
3
Share

Where is the fuel tank switch of Borgward BX5?

The fuel tank cap switch of Borgward BX5 is located on the right side of the vehicle. Common methods to open the fuel tank cap: 1. Mechanical key method. This type of fuel tank cap switch is relatively rare and is usually found on some rugged off-road vehicles. Nowadays, family cars do not use mechanical keys to open the fuel tank cap because it is relatively complicated to use. 2. In-car switch method. The in-car switch is currently the most common way to open the fuel tank door, and it is certainly more convenient than using a key. The in-car switch is located in different positions in different car models. Some are on the floor to the left of the driver's seat, some are on the left front door panel or on the center console, all marked with a fuel pump icon. However, it should be noted that the in-car switch can easily make the owner forget to turn off the engine before refueling, so the owner should remember to turn off the engine before refueling. 3. Press-type opening method. The press-type opening of the fuel tank door is currently the most convenient method. The owner only needs to park the car, and the refueling staff can directly refuel. However, when the owner is not parking for refueling, remember to lock the central control, otherwise the fuel tank cap can be opened. Here is some additional information: 1. It is recommended to refuel with 95-octane gasoline. 2. The fuel tank cap switch of Borgward BX5 only needs to be pressed when the vehicle is unlocked to open the fuel tank cap.
8
5
Share

What is the red liquid in a car?

The red liquid in a car is antifreeze coolant. Here is an introduction to coolant: Introduction to coolant: Coolant, whose full name should be antifreeze coolant, means coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator and freezing the engine cylinder block when the car is parked in cold seasons. Functions of coolant: Winter antifreeze. In order to prevent the coolant from freezing and causing the water tank and engine block to crack after the car is parked in winter, the freezing point of the coolant should be about 10 degrees Celsius lower than the lowest temperature in the area, in case of sudden weather changes; Anti-corrosion. The radiator, water pump, cylinder block and cylinder head, water distribution pipe and other components in the cooling system are made of steel, cast iron, brass, copper, aluminum, solder and other metals. Due to the different electrode potentials of different metals, electrochemical corrosion is prone to occur under the action of electrolytes. At the same time, the acidic products formed after the decomposition of glycol substances in the coolant and the acidic exhaust gas after fuel combustion may also penetrate into the cooling system, promoting the corrosion of the cooling system. Corrosion of the cooling system will cause failures in the lower water chamber of the radiator, the nozzle sleeve, cooling pipes, joints and radiator pipes, while corrosion products will block the pipes, causing the engine to overheat or even break down. If corrosion perforation occurs, the coolant seeping into the combustion chamber or crankcase will cause serious damage, because when the coolant or water is mixed with engine oil, oil sludge and gum will be produced, weakening lubrication and causing valves, hydraulic valve push rods and piston rings to stick. Therefore, a certain amount of anti-corrosion additives are added to the coolant to prevent corrosion in the cooling system; Anti-scaling.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.