Materials mainly used for car polishing include the following: 1. Polishing machine. 2. Polishing adhesive disc. 3. Such as wool disc, rabbit hair disc, sponge disc. 4. Polishing compound. 5. Masking film. 6. Paper tape. Generally, after polishing is completed, waxing, sealing glaze or coating is required. The main steps of car polishing are as follows: 1. Wash the whole car. Use a paint cleaner with strong decontamination power to clean the whole car. When using the cleaner, avoid particles and dust causing new scratches during grinding. 2. Sand with water sandpaper. For defects such as coarse particles, fine sandpaper marks, and flow marks on the coating surface, use water sandpaper wrapped around a small rubber pad with water to gently sand until smooth before polishing. 3. Coarse and fine grinding. Use a mechanical grinder with coarse grinding paste to coarsely grind the marks left by water sandpaper; then add polishing paste for fine grinding. 4. Polishing. Use a mechanical polisher with a mirror finish agent to remove the swirl marks left by the coarse grinding paste, achieving a mirror-like polishing effect on the paint film. 5. Manual polishing. After grinding and polishing, wipe off the grinding and polishing paste, immediately use cotton yarn dipped in polishing wax to wipe all polished areas, then use dry cotton yarn to wipe off excess polishing wax, making the paint surface as bright as a mirror and dazzlingly beautiful.
